ENGINE MANAGEMENT & ELECTRONICS
///
BACK TO TOP |
|
AEM INFINITY SERIES 5 STAND ALONE ECU (506 & 508)
The Series 5 AEM Infinity 506 ECU for 4 and 6 cylinders and 508 ECU for up to 8 cylinders deliver state-of-the-art electronic fuel injection (EFI) control capabilities typically found only at upper echelons of Motorsports. Through the Infinity ECU, AEM makes this technology affordable for both professional race teams and amateur racers.
Universal Application.
30-7106 |
|
AEM INFINITY SERIES 7 STAND ALONE ECU (708, 710 & 712)
The AEM Infinity Series 7 ECUs are designed for up to 8 and 10 cylinder engines delivering state-of-the-art programmable EFI control capabilities typically found only at upper echelons of Motorsports. Through the Infinity ECU, AEM makes this technology affordable for both professional race teams and amateur racers.
Universal Application.
30-7101,30-7100,30-7111 |
|
AEM FUEL IGNITION CONTROLLER (FIC-6)
The AEM FIC allows racers to retard ignition and deliver accurate amounts of fuel to aftermarket forced induction race engines with up to 6 cylinders without the need for outdated FMUs or "boost hiding" controllers. This system works parallel to the factory ECU on OBD-II-equipped race vehicles with non-factory forced induction systems with or without variable cam timing and prevents tuning limitations due to complex factory timing patterns.
Universal Application.
30-1910 |
|
NEW HKS TURBO TIMER TYPE-1
HKS's new sleek styling is great for a custom mounted location or small enough to be tucked out of the way. The Type-1 is a more sophisticated unit with abilities to display 1/4 mile times, speed, 0-60ft and much more.
Universal Application.
41001-AK010 |
|
NEW HKS TURBO TIMER TYPE-0
HKS's new sleek styling is great for a custom mounted location or small enough to be tucked out of the way. The Type-0 is a more basic Timer than the Type-1 above and comes with the red light-up display.
Universal Application.
41001-AK009 |
CABLES, HARNESSES & SENSORS
///
BACK TO TOP |
|
AEM INFINITY PLUG & PLAY HARNESS (92-95 HONDA OBDI)
AEM Series 5 Infinity ECU plug & play harness with expansion port for 92-95 Honda OBDI engines.
1992-1995 B/D/H Series Honda/Acura OBDI.
30-3501 |
|
AEM INFINITY PLUG & PLAY HARNESS (99-01 HONDA OBD2B)
AEM Series 5 Infinity ECU plug & play harness with expansion port for 99-01 Honda OBD2B manual transmission engines.
1999-2001 OBDIIB Honda/Acura B/D/H-Series M/T.
30-3509 |
|
AEM INFINITY PLUG & PLAY HARNESS (HONDA K-SERIES)
AEM Series 5 Infinity ECU plug & play harness with expansion port for Honda/Acura K-Series manual transmission engines.
Honda/Acura K-Series M/T Engines.
30-3502 |
|
AEM INFINITY PLUG & PLAY HARNESS (00-05 HONDA S2000)
AEM Series 5 Infinity ECU plug & play harness with expansion port for 2000-2005 Honda S2000 manual transmission engines.
2000-2005 Honda S2000 M/T Engine.
30-3508 |
|
AEM INFINITY PLUG & PLAY HARNESS (350Z & G35)
AEM Series 7 Infinity ECU plug & play harness with expansion port for Nissan 350Z & Infinity G35 manual transmission engines.
Nissan 350Z & Infinity G35 Manual Transmission.
30-3520 |
|
AEM INFINITY PLUG & PLAY HARNESS (SILVIA SR20DET)
AEM Series 5 Infinity ECU plug & play harness with expansion port for Nissan Silvia SR20DET manual transmission engines.
1994-1996 Nissan Silvia SR20DET Manual Transmission.
30-3517 |
|
AEM INFINITY PLUG & PLAY HARNESS (SKYLINE RB26DETT)
AEM Series 5 Infinity ECU plug & play harness with expansion port for Nissan Skyline GT-R RB26DETT manual transmission engines.
1989-1998 Nissan Skyline GT-R RB26DETT Manual Transmission.
30-3515 |
|
AEM INFINITY PLUG & PLAY HARNESS (93-98 MKIV SUPRA)
AEM Series 7 Infinity ECU plug & play harness with expansion port for MKIV Toyota Supra manual transmission engines.
1993-1998 MKIV Toyota Supra Turbo.
30-3500 |
|
AEM INFINITY SERIES 7 UNIVERSAL PLUG & PIN KIT
The AEM Infinity Series 7 Universal Plug & Pin Kit includes (1) 73-pin connector with cover, (1) 56-pin connector with cover, 130 small pins, 1 large pin with weather seal, 1 micro relay with pins, and 30 sealing plugs. AEM offers several different wiring harness types and configurations to simplify the process of wiring the Infinity ECU to your vehicle.
Universal Application.
30-3701 |
|
AEM INFINITY SERIES 7 UNIVERSAL WIRING HARNESS
The AEM Infinity Series 7 Universal Wiring Harness includes pre-wired power and grounds, power relay, fuse box, dual wideband connectors, AEMnet connector (CAN), 100 X 96" terminated wires for population and 12 small pins. AEM offers several different wiring harness types and configurations to simplify the process of wiring the Infinity ECU to your vehicle.
Universal Application.
30-3702 |
|
AEM INFINITY SERIES 7 MINI UNIVERSAL WIRING HARNESS
The AEM Infinity Series 7 Mini Universal Harness includes pre-wired power and grounds, power relay, fuse box, dual wideband connectors, AEMnet connector (CAN), 100 small pins with 30 sealing plugs. AEM offers several different wiring harness types and configurations to simplify the process of wiring the Infinity ECU to your vehicle.
Universal Application.
30-3703 |
|
AEM INFINITY SERIES 5 PLUG & PIN KIT
The AEM Infinity Series 5 Plug & Pin Kit includes 80 pin connector with cover, 80 small pins, 1 micro relay with pins and 30 sealing plugs. AEM offers several different wiring harness types and configurations to simplify the process of wiring the Infinity ECU to your vehicle.
Universal Application.
30-3704 |
|
AEM INFINITY SERIES 5 MINI UNIVERSAL WIRING HARNESS
The AEM Infinity Series 5 Mini Universal Harness includes pre-wired power, grounds, power relay, fuse box, single wideband & AEMnet, 80 small pins and 30 sealing plugs. AEM offers several different wiring harness types and configurations to simplify the process of wiring the Infinity ECU to your vehicle.
Universal Application.
30-3705 |
|
AEM INFINITY SERIES 5 UNIVERSAL MINI FLYING LEAD HARNESS
The AEM Infinity Series 5 Universal Mini Flying Lead Harness includes pre-wired power, grounds, power relay, single wideband, 8 x coils & 8 x injectors. I/O wiring includes TPS, MAP, CLT, AIT, +5V, Sensor Ground, Fan, Tach & 2 Step. 10 x 96" 22ga Terminated wire and 2 x 96" Terminated 2-Pair Twisted/Shielded Wire. AEM offers several different wiring harness types and configurations to simplify the process of wiring the Infinity ECU to your vehicle.
Universal Application.
30-3706 |
|
AEM INFINITY 02 SENSOR EXTENSION HARNESS
The AEM Infinity 02 Sensor Extension Harness allows you to connect your AEM wideband O2 air/fuel ratio sensors to the Infinity's on-board wideband UEGO controllers. 72" length.
Universal Application.
30-3600 |
|
AEM INFINITY AUX HARNESS FOR AIT AND MAP SENSOR
The AEM Infinity Aux Harness for AIT and MAP Sensor allows you to connect your AEM AIT and MAP sensors to the Infinity's Aux Deuatch Plug. 72" length.
Universal Application.
30-3510-00 |
|
AEM INFINITY IP67 COMMUNICATIONS CABLE
Protect your AEM Infinity ECU by using IP67-rated communications cables. They are completely dustproof and are rated waterproof to 1 meter.
Universal Application.
30-3601 |
|
AEM INFINITY IP67 LOGGING CABLE
Protect your AEM Infinity ECU by using IP67-rated communications cables. They are completely dustproof and are rated waterproof to 1 meter.
Universal Application.
30-3602 |
|
COBB AP3 OBDII UNIVERSAL ACCESSPORT CABLE
Tired of your Accessport OBDII cable getting in the way? The new COBB OBDII Universal Cable features a much lower profile OBD connector design. The 6ft cable allows for a cleaner installation when choosing to route behind the dash.
Universal Application.
AP3-OBDII-CABLE-UNIVERSAL |
|
AEM SERIES 2 EMS REPLACEMENT PLUG & PIN KIT
This AEM Series 2 EMS Replacement Plug & Pin Kit is compatible with Series 2 boxes including: 30-1002, 1040's, 1310's, 1710, 1720, 6040's, 6310's, 6710 and 6720. This kit will fit the Evo 8, 2G DSM and 3000GT boxes.
AEM EMS Series 2
35-2611 |
SENSORS & SOLENOIDS
///
BACK TO TOP |
|
AEM BOOST CONTROL SOLENOID
AEM's Boost Control Solenoid is specifically manufactured for automotive applications. It is designed to resist corrosion and sticking from exposure to rich fuel mixtures. AEM's Boost Control Solenoid is pressure tested to 100 PSI and includes 1/8" NPT to 3/8" barb fittings to reduce any chance of leaks.
Universal Application.
30-2400 |
|
PERRIN 3-PORT ELECTRONIC BOOST CONTROL SOLENOID
The EBCS PRO operates almost 2 times faster than other designs, allowing almost 50% more airflow, and works with OEM ECUs without causing check engine lights.
Universal Application.
ASM-TAC-726 |
|
AEM AIR INLET TEMPERATURE SENSOR
Air inlet temperature sensor kit. Includes aluminum weld-in bung, connector plug with flying lead & sensor.
Universal Application.
30-2010 |
|
STM UNIVERSAL GM AIR INTAKE TEMPERATURE SENSOR KIT
For a less expensive option to the AEM sensors, The STM GM Air Intake Temperature Sensor Kit includes an aluminum weld-on bung for your pipe, GM AIT sensor and matching pigtail harness.
Universal Application.
STM-GMAIT |
|
DURALAST GM AIT SENSOR PIGTAIL HARNESS
Duralast GM air intake temperature sensor female pigtail harness. Typically used with Mitsubishi DSM & Evolution speed density conversions.
Universal Application.
235 |
|
DURALAST GM AIT SENSOR
Duralast GM 3/8" NPT air intake temperature sensor. Typically used with Mitsubishi DSM & Evolution speed density conversions
Universal Application.
SU-107 |
|
AEM REPLACEMENT PRESSURE SENSOR KITS
AEM Replacement PSIg pressure sensors are available from 100-2000 psi for boost, EGT, nitrous, brake pressure, inlet air temperature, or UEGO replacement gauges.
Universal Application.
30-2130-100,30-2130-150,30-2130-500,30-2130-1000,30-2130-2000 |
|
AEM REPLACEMENT MAP SENSOR KITS
AEM Replacement MAP Sensor Kits include stainless steel sensor, connector, pins, 1/8" NPT to -4AN adapter & 1/8" NPT to 3/16" barb adapter. 1, 2, 3.5 and 5 BAR.
Universal Application.
30-2130-15,30-2130-30,30-2130-50,30-2130-75 |
|
AEM MAP SENSOR CONNECTOR
AEM Map Sensor Connector.
Universal Application.
35-2131 |
|
AEM UNIVERSAL 12 POSITION TRIM POT
The AEM Universal 12 Position Trim Pot is for use on virtually any Engine Management System, such as the AEM EMS. Use the Trim Pot to adjust a number of trims, including ignition timing, fuel, boost, etc.
Universal Application.
30-2056 |
|
AEM REPLACEMENT UEGO O2 SENSOR (BOSCH 4.9LSU) (NEW UEGO)
AEM's Bosch 4.9LSU Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM Digital Wideband UEGO Air/Fuel Controller Part Number 30-4110.
Universal Application.
30-2004 |
|
AEM REPLACEMENT UEGO O2 SENSOR (BOSCH 4.2LSU) (OLD UEGO)
Bosch LSU 4.2 Replacement O2 Sensor Kit (for old UEGO 30-4100) includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM wideband air/fuel UEGO controllers.
Universal Application.
30-2001 |
|
AUTOMETER NARROW BAND O2 SENSOR KIT
Auto Meter Narrow Band O2 Sensor Kit for use with narrow band air/fuel ratio gauges.
Universal Application.
2244 |
|
INNOVATE REPLACEMENT 02 SENSOR (LSU 4.2)
Bosch LSU 4.2 5-Wire Wide-Band O2 Sensor. Compatible with Innovate Motorsports LM-1, LM-2, LC-1, and LC-1ST.
Universal Application.
3737 |
|
INNOVATE REPLACEMENT 02 SENSOR (LSU 4.9)
Bosch LSU 4.9 5-Wire Wide-Band O2 Sensor. Compatible with Innovate Motorsports LM-2, LC-2, and MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1.
Universal Application.
17025,3888 |
|
NGK NTK REPLACEMENT O2 SENSOR
NGK / NTK replacement oxygen sensor sensor for the AFX wideband monitor.
Universal Application.
24302 |
IGNITION & COILS
///
BACK TO TOP |
|
DENSO REPLACEMENT DIRECT IGNITION COIL
Denso Replacement Direct Ignition Coils are sold individually as needed. This coil is compatible with STM Mitsubishi Evolution VIII-IX Coil-On-Plug Ignition Systems.
Universal Application.
673-1306 |
|
SMART GAP SPARK PLUG GAPPING TOOL
The Smart Gap Spark Plug Gapping Tool allows for easy handling of your spark plug and gauge for for a smooth, controlled and precise gap. So you can stop banging your plugs on random hard surfaces!
Available for 12mm or 14mm threads.
HSMM-SMARTGAP |
|