DSM
|
EVO
|
EVO X
|
3000GT
|
GTR
|
BIKES
|
SUBARU
|
EVO X 4B11 ENGINE COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
GSC POWER-DIVISION CAMSHAFTS
GSC Power-Division Camshafts. S1 and S2. 4B11 Evo X. Using cutting edge design software and quality chill cast and ductile iron billets ground on one of the most advanced CNC grinding equipment in the world has given GSC the chance to become a world wide supplier for some of the very best performance camshafts in our markets.
GSC6010S1,GSC6010S2 |
|
|
|
TOMEI CAMSHAFTS | PONCAM | PROCAM
Tomei's Poncam 260/250 cams work with your stock valve springs, but the more aggressive Procam's will require an upgrade.
|
|
|
|
COSWORTH MX-1 CAMSHAFTS
Ground from new Cosworth billets, these cams for the Evo X will provide substantial power gains while remaining drivable in all conditions. Additionally, these can be installed using the original valve springs if the original rev limiter is retained. If the rev limited is raised, upgraded Cosworth valve springs should be used in conjunction with these cams.
Price: $725.00
|
|
|
|
KELFORD HYDRAULIC CAMS
Ground on a masterless Toyoda CNC camshaft grinder, these high-quality cams provide superior performance and, by design, put less stress on valvetrain components. Kelford has applications to meet your aggressive street set up or full-out race car!
Price: $680.00
|
|
|
|
TOMEI OVAL WIRE VALVE SPRINGS
This new valve spring is made from a high tensile, oval shaped wire rod. This was designed specifically for high engine speeds and axtreme conditions. Durable and reliable for prolonged peroids.
Price: $249.00
|
|
|
|
MANLEY 4B11 SPRINGS & RETAINERS
Manley valve springs are wound from super clean alloy. Each design minimizes stress to ensure long service life with high lift camshafts. Titanium retainers are manufactured in double spindle CNC machines to exacting tolerances and precise installed height specifications. Valve locks are manufactured in Swiss turning centers with rigid control over the all-important angle to ensure precise mating with the retainer.
|
|
|
|
GSC POWER DIVISION SPRINGS & RETAINERS
GSC beehive springs use an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is the GSC spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness. Evo X.
Price: $370.00
5042 |
|
|
|
BUSCHUR/SUPERTECH DUAL VALVE SPRINGS & RETAINERS
Buschur Racing is pleased to have teamed up with Supertech to offer the same valve springs and titanium retainers that they have had produced for the Buschur Stage 3 cylinder heads. Kit includes 16 Dual Valves and Titanium Retainers.
Price: $315.00
|
|
|
|
COSWORTH DUAL VALVE SPRINGS & RETAINERS
Cosworth Ultra Race Valve Springs are wound from the highest quality chrome silicone steel with chamfered ends and are heat treated and stress relieved for long term reliability. Ultra Race Valve Spring kits are compatible with Cosworth high performance valves.
Price: $789.00
|
|
|
|
SUPERTECH EXHAUST VALVES (INCONEL)
The Supertech Inconel Exhaust Valves use a nickel base alloy material for engines that reach very high temperatures. Set of 8 Inconnel Exhaust Valves in standard size and +1mm. 4B11 Evo X.
MEVI-1017,MEVI-1019 |
|
|
|
SUPERTECH INTAKE VALVES (BLACK NITRITE)
Supertech Performance Intake and Exhaust Valves are engineered for high RPM's and high HP. These have a nitride coating, perfect for high temps, and run cooler. Supertech offers standard size valves and +1mm. Sold as a set of 8 valves. 4B11 Evo X.
MIVN-1017,MIVN-1019 |
|
|
|
MANLEY PISTONS
Manley pistons are machined of high strength 2618 material. Each design is lightweight yet robust enough to deliver long service life. All pistons come with moly coated skirts. Round wire locks, premium chrome moly wrist pins, and premium steel top ring sets from Total Seal are included with every kit at no additional charge.
|
|
|
|
MANLEY PISTON RINGS
Manley Piston Rings. Top Ring: High performance ductile iron with plasma moly in-lay or premium steel with Chrome Nitride face coating. Second Ring: Reverse twist cast iron. Oil Ring: Three piece, standard tension, full oil return. Set of 4.
|
|
|
|
WISECO PISTONS 9.0:1
Wiseco's forged piston and ring set is available for the 4g63 Evo VIII-IX and the 4b11 Evo X. Dedicated 2618 alloy forgings, offset wrist pins, Nitrided/Napier Steel rings, skirt coatings, complex dish and dome designs, special skirt profiles, and other features insure longevity and power with boosted and nitrous engines.
|
|
|
|
WISECO XX REPLACEMENT PISTON RINGS
Wiseco's XX piston ring sets feature a stainless steel, gas-nitrided, barrel-faced top ring. They also contain an under hook style, cast iron, phosphate-coated, taper-faced second ring. Oil rings in the XX sets are 3-piece assemblies with gas-nitrided rails and a stainless steel, flex-vent spacer. Price is for ONE piston ring set. Check your quantity when ordering.
|
|
|
|
COSWORTH PISTONS 9.0:1
All Cosworth pistons are manufactured using the same methods as our Formula One pistons and include features such anti scuff skirt coating, ulta-strong pins, polished top and patented anti-detonation bands. Additionally, each application uses a unique forging to minimize weight and ensure the strongest possible piston design.
|
|
|
|
COSWORTH PISTON RINGS
High performance piston rings for a set of 4 Cosworth pistons.
|
|
|
|
JE PISTONS EVO X 4B11 9.0:1
JE designs are specifically engineered for extreme applications up to, and including, professional competition. In this environment, the higher compression ratios, highest boost or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. Complete set of 4 pistons, rings and pins.
|
|
|
|
JE REPLACEMENT PISTON RINGS
Top ring, second ring and oil ring are all included in a complete set for 4 pistons. Available for 4B11 86mm and 86.5mm pistons.
JG1004-3386,JG1004-3405 |
|
|
|
BUSCHUR SPEC JE PISTONS
Buschur Racing Spec Evo X JE Pistons are NOT your standard off the shelf JE Piston. Buschur Racing worked very closely with JE in the development process allowing them to get everything done to their high specifications. Compression Ratio: Stock (9.0:1), available in: standard bore or .020 over.
|
|
|
|
MANLEY RODS
Manley Performance manufactures the finest steel connecting rods in the Sport Compact industry. Choose from their lineup of H Beam, and I Beam, and for added durability, they are available with the upgraded 625 ARP bolts.
|
|
|
|
MANLEY BILLET STROKER CRANKSHAFT
Manley' 94mm Turbo Tuff Series Billet Stroker Crankshafts features a uniquely designed, ultra-lightweight, fully contoured counterweights resulting in reduced windage and maximum performance.
Price: $1350.00
|
|
|
|
COSWORTH 4B11 HEAD GASKETS
Engineered to seal in power under the most demanding conditions. Constructed from stainless steel with a folded stopper layer, each application features superior sealing compared to conventional multi layer steel gaskets and manufactured from pre-coated die cut stainless steel resulting in uniform coating distribution and consistent shape. 87mm gasket with optional 1.1 or 1.3mm thickness.
|
|
|
|
COSWORTH 4B11 HEAD STUDS
Cosworth Ultra High Performance Head Studs are manufactured from H11 tool steel with 260,000psi tensile strength and come complete with nuts and washers. Manufactured with hex broach end for ease of installation.
Price: $459.00
|
|
|
|
ARP 4B11 HEAD STUDS
All Pro Series ARP2000 studs are centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 220,000 psi. These fasteners deliver a 35% increase in tensile strength over the OEM torque-to-yield (TTY) head bolts.
Price: $157.00
207-4206 |
|
|
|
ARP 4B11 MAIN STUDS
All Pro Series ARP2000 studs are centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 220,000 psi. These fasteners deliver a 50% increase in tensile strength over the OEM main bolts.
Price: $175.00
207-5403 |
|
|
|
ARP 4B11 ROD BOLTS
No worries of stretched rod bolts! ARP's premium grade 8740 chrome moly steel rod bolts will keep your rods strong where it really counts.
Price: $135.00
|
|
|
|
COSWORTH EVO X 4B11 MAIN BEARING SET
Cosworth Race Main bearing sets feature a unique combination of design, metallurgy and engineering to deliver performance in extreme conditions. Cosworth Race bearings sets are available in three sizes to accommodate most applications.
|
|
|
|
COSWORTH EVO X 4B11 ROD BEARING SET
Cosworth Race Rod bearing sets feature a unique combination of design, metallurgy and engineering to deliver performance in extreme conditions. Cosworth Race bearings sets are available in three sizes to accommodate most applications.
|
|
|
|
COSWORTH EVO X 4B11 THRUST BEARING
Cosworth Thrust Bearings for the Evolution X 4B11.
Price: $45.00
|
|
|
|
OEM 4B11 METAL IDLER PULLEY
This is the OEM replacement for the "plastic death mechanism" that comes factory on your 4B11 motor. Upgrade to this metal pulley before your plastic one breaks!
Price: $80.00
|
|
|
|
DRESS UP BOLTS
Take pride in your engine bay? It's time to take it to the next level with a Titanium Series Dress Up Kit for your engine bay and engine! These kits are a complete replacement for most visible bolts and nuts on your specific vehicle's engine bay, ready to bolt in as soon as they arrive. Evo X.
|
|
|
|
GREDDY CARBON HOOD DAMPER
GReddy Carbon Hood Damper Kits are carefully designed for each specific OEM hood application. The high-end Carbon Damper and the locking ball joint / cup mounts allow for smooth opening and closing operation. Evo X.
Price: $175.00
|
|
|
|
FORGE ALLOY WASHER RESERVOIR FILLER
The Forge Motorsport Alloy Washer Fluid Reservior Filler for the Mitsubishi Evo X will take only minutes to install, but will look fabulous for a very long time. Evo X.
Price: $135.00
FMWEV10 |
|
|
|
FORGE POLISHED POWER STEERING TANK
The Forge Motorsport Polished Alloy Power Steering Tank for the Mitsubishi Evo X is not only a beautiful accessory to your engine bay, but features a direct fit and has an easy to see sight glass to ensure you can keep an eye on the fluid level. Evo X.
Price: $240.00
FMPASEV10 |
|
|
|
FORGE ALLOY COOLANT OVERFLOW TANK
The Forge Motorsport Alloy Coolant Overflow Tank for the Mitsubishi Evo X is function and beauty. It will handle the high temperatures and pressures associated with tuned engines and also look amazing, enhancing your engine compartment. Evo X.
Price: $285.00
FMHTEV10 |
|
|
|
JMF SMALL OIL CATCHCAN
Featuring 2 heavy duty brass inlet fittings, and a brass drain valve, it can be installed by running a hose from the valve cover directly to the catch can, or by utilizing the 2nd inlet, and eliminating the PCV valve. Crafted by JM Fabrications.
Price: $90.00
|
|
|
|
JMF DELUXE OIL CATCHCAN
Similar to JMF's catch cans above, this deluxe unit features a larger body, larger K&N filter, and a level gauge. Also giving you the choice of standard brass fittings or -8, -10 or -12AN fittings. Click for more information.
|
|
|
|
MISHIMOTO CARBON FIBER OIL CATCH CAN
Mishimoto Universal Carbon Fiber Oil Catch Can measures a total of 3" x 6" and includes all necessary brackets and hardware for install.
Price: $120.00
|
|
|
|
|
MISHIMOTO BLACK OIL CATCH CAN
Mishimoto Universal Black Oil Catch Can measures a total of 3.25" x 6" and includes all necessary brackets and hardware for install.
Price: $99.00
|
|
|
|
|
MISHIMOTO POWER STEERING RESERVOIR
The Mishimoto Aluminum Power Steering Reservoir Tank is offered as a universal fitment, comprehensive kit, complete with a mounting bracket, fittings, and hardware. Guaranteed to improve the aesthetics of your bay with its polished aluminum finish!
Price: $79.00
|
|
|
|
|
MISHIMOTO MAGNETIC OIL DRAIN PLUG
Constructed out of 6061 aluminum and made with a neodymium magnet that holds on to the metal debris that your oil filter might miss that could ruin your engine, protecting it longer than any other oil plug on the market. Comes with a Dowty oil seal to prevent leaks. M14 x 1.5 (Fits most Mitsubishi.)
Price: $18.00
|
|
|
|
|
GREDDY MAGNETIC OIL DRAIN PLUG
The Greddy Magnetic Oil Drain Plug is a powerful 5000 gauss neodymium magnet. The Neodymium magnet is one of the most powerful magnet on the market. The hard anodized aluminum drain plugs are available in three popular sizes to match most Japanese vehicles. By using the "GReddy Magdrain" plug, you can help reduce the amount of abrasive materials in your engine, while extending the life of your engine. M14 x 1.5.
Price: $17.00
|
|
|
|
|
HKS HYBRID SPORTS OIL FILTER
Most aftermarket sports oil filters assume the use of high viscosity oil; therefore, filter paper strength is prioritized while sacrificing absolute pressure loss properties. HKS Hybrid Sports Oil Filter has readdressed filter strength and overall structure to provide the oil flow that the engine requires and to pursue the HKS ideals in what is required from a sports oil filter.
Price: $22.00
|
|
|
|
|
K&N OIL FILTERS
K&N uses thicker canister walls for extra strength and durability coupled with a resin-impregnated cellulose filter media allowing for higher flow rates while providing outstanding filtration. Rapidly becoming a favorite among consumers for its durability and easy removal, with a 1' nut welded to the top of the canister so they can be easily wrenched-off with a standard tool.
Price: $11.00
|
|
|
|
|
K&N BREATHER FILTERS
K&N's Crankcase Vent Filters are designed to clamp directly to metal or plastic tubing. Ideal for engines, transmissions, oil or gas tanks on racing vehicles. Available in a wide variety of sizes and applications. Please click the image for more info.
|
|
|
|
|
VIBRANT BREATHER FILTERS
Vibrant Performance Crankcase Breather Filter with Chrome Cap. Cotton Gauze Filter Element / Metal Base. Available in a wide variety of sizes and applications. Please click the image for more info.
|
|
|
|
|
THREE BOND GASKET MAKER
ThreeBond Gasket Maker Gray RTV Sealant is the highest quality silicone RTV on the market. Specified by many OEM service manuals, you can rest assured it is a perfect choice for your engine.
Price: $20.00
|
|
|
|
|
LOOKING FOR OEM MITSUBISHI PARTS?
Check here for OEM gaskets, belts, bolts, filters and all the random things you may need.
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |