DSM
|
EVO
|
EVO X
|
3000GT
|
NISSAN
|
BMW
|
SUBARU
|
EVO VIII-IX DRIVETRAIN COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
STM CLUTCH FORK STOP
This piece is designed to stop the clip on your clutch from popping out due to hard shifting. It is an extremely common and irritating problem with the Evo VIII-IX. Our piece is made of billet aluminum in Rochester, NY and installs in minutes.
|
|
|
|
STM CLUTCHLINE FULL MASTER TO SLAVE
STM has teamed up with Goodridge to design the first, full master to slave cylinder, one-piece stainless clutchline. Includes everything pictured for a clean and simple install. Save money, call a friend and buy 2!
|
|
|
|
STM STAINLESS (UPPER) CLUTCHLINE
STM has teamed up with Goodridge to bring you our new Stainless Clutchline for the 90-99 DSM and Evo VIII-IX. Fits right between your factory hard line and master cylinder.
Price: $25.00
|
|
|
|
STM STAINLESS (LOWER) CLUTCHLINE
STM has teamed up with Goodridge to bring you our Stainless Lower Clutchline for the Evo VIII-IX. This line replaces the lower OEM steel line that connects to the slave cylinder. Includes both fittings and features a 90° end for an easy install.
Price: $40.00
|
|
|
|
EXEDY CLUTCH KITS VIII-IX
Includes a lightweight chromoly steel flywheel, the famous purple anodized forged aluminum clutch cover and T5001 cerametallic friction materials for extreme heat resistance. The twin plate clutches rated up to 500+ ft lbs, and the triple plate up to 800+ ft lbs at the flywheel. Click for all applications.
|
|
|
|
EXEDY TWIN REPLACEMENT DISCS
Twin plate replacement discs for Evo VIII-IX Exedy Twin Cerametallic Clutch Kits. Both discs are included.
Price: $445.00
|
|
|
|
EXEDY WAVE LOCK RETAINING CLIP
If you need to buy this, then your life probably sucks right now! We feel your pain. This time around, be sure to install the STM Clutch Fork Stop!
Price: $30.00
|
|
|
|
EXEDY CLUTCH COVER BOLT SETS
Exedy Clutch Cover Bolt set for Mitsubishi Evo VIII-IX Exedy Single and Multiplate clutches.
|
|
|
|
EVO VIII-IX ACT CLUTCH KITS
Includes the ACT pressure plate, ACT's street disc, OEM style throw-out bearing and clutch alignment tool. These kits have everything you need along with a great pedal feel! Choose from the "Heavy Duty" or "Extreme Duty" Clutches and pair them with a sprung or unsprung street disc, 6-puck or 4-puck disc. Click for more info.
|
|
|
|
|
ACT CLUTCH DISCS
These are ACT's replacement clutch discs for the Evo VIII-IX. Street discs, 4-pucks and 6 pucks are available in the sprung and solid models.
|
|
|
|
EXEDY RACING FLYWHEEL
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings and only 12 pounds! The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel. Evo VIII-IX, 5 and 6 speed models.
Price: $399.00
|
|
|
|
ACT PROLITE & STREETLITE FLYWHEELS
The ACT Pro-Lite weighs in at 10 pounds and the ACT Street-Lite weighs 13.1 pounds. Be sure to select your model when ordering. Fits Evo VIII-IX, 5 and 6 speed models. Add OEM flywheel bolts for only $3.50 each.
|
|
|
|
ACT THROW OUT BEARING
ACT's Clutch Release Bearings are designed to withstand the forces that are produced by high performance clutches. Whether you're on the street or the strip, ACT's bearings will prove reliable, shift after shift.
Price: $83.00
|
|
|
|
ACT CLUTCH ALIGNMENT TOOL
Fits Evo VIII-IX.
Price: $6.00
|
|
|
|
|
AWD MOTORSPORTS ALUMINUM DRIVESHAFT
AWD Motorsports designed this for their own drag car. After the beatings he gave it... They are confident that this will withstand an Evo's abuse. The single aluminum shaft drops 15+lbs off the entire assembly. This unit replaces the rear 2 piece section and makes for a 1 piece rear. The front is still retained stock and just balanced.Click for more info
Price: $799.00
|
|
|
|
BUSCHUR RACING DRIVESHAFT LOOP
Made of chrome moly, it bolts into existing holes in the car with the side brackets leaving room to fit the buschur 3" exhaust through/past it too. If the front of the u-joint, yoke or driveshaft itself breaks the driveshaft can dig into the pavement or come through the floor and take your legs out. This is meant to prevent that from happening.
Price: $290.00
|
|
|
|
BUSCHUR RACING SHORT SHIFTER
The Buschur Racing short shifter is a direct replacement of your factory Evo VIII-IX shifter and will reduce the amount of throw in your shifting distance.
Price: $135.00
|
|
|
|
|
"MOUSTACHE BAR" (REAR DIFF SUPPORT)
This is the Buschur Racing Rear Differential Support, or called by some the "Moustache Bar." This holds the rear differential in place. The rediculously heavy stock bar weighed 15.9 pounds! While the new Buschur piece holds strong at only 3.2 pounds! You can shed almost 13 pounds off the car with this one piece!
Price: $285.00
|
|
|
|
|
REAR DIFF SIDE SUPPORT BRACKETS
This is Buschur's lightweight, billet aluminum solution to those rusted chunks of steel that currently bolt to the sides of your rear diff. These new Side Differential Support Brackets weighed in at only 4.25 pounds and completely replace the stock part with no need to replace the rubber bushing.
Price: $285.00
|
|
|
|
|
BUSCHUR FRONT CROSS MEMBER BRACE
This is designed to replace the member that is located under the front of your Evolution that runs front to rear. Made of lightweight chromoly tubing this item saves 6.2 pounds of weight from the stock member.
Price: $275.00
|
|
|
|
|
BUSCHUR RACING SHIFTER BUSHINGS
The stock, rubber bushings can tear and wear, leaving you unable to put the car in gear! These BR bushings are made of hardened aluminum, they are cheaper and half the weight of competitor's bushing sets. Available for 5 and 6 speed Evo VIII-IX.
|
|
|
|
|
TORQUE SOLUTION SHORT SHIFTER (5-SPEED)
Torque Solution short throw shifter is a direct replacement for your long throw stock unit. Our shifters are made from 4130 Chromoly steel and are CNC machined to precision tolerances. After this they are set out to be black zinc plated to last a lifetime.
Price: $110.00
|
|
|
|
|
DRIVESHAFT CARRIER BEARING BUSHINGS
Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with billet aluminum pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.T's. The mounts keep the propeller shaft from moving under hard acceleration, stopping and turning giving you optimal performance 100% of the time.
Price: $45.00
|
|
|
|
|
TORQUE SOLUTION SHIFTER CABLE BUSHINGS
Developed to perform under the most extreme conditions, Torque Solution Shock Factor Shifter Bushings bridge the gap between ordinary aluminum, brass, and cheap plastics used in current aftermarket shifter bushings by offering a unique Delrin, specifically chosen by Torque Solution engineers to ensure product performance and reliability while drastically reducing shifter end play allowing for crisper, more precise shifts.
|
|
|
|
|
SHIFTER BASE BUSHING KIT
Torque Solution shifter base bushing kit replaces the OEM rubber bushings on the bottom of the shifter providing a more stable shifter platform and mounting points. This yeilds improved shifting feel and characteristics for years of enjoyment.
Price: $25.00
|
|
|
|
|
ENERGY SUSPENSION REAR DIFF BUSHING SET
Sick of that "Thunk" when you shift hard into the next gear? These will take care of that. Energy Suspension's HYPER-FLEX performance polyurethane rear differential/moustache bar bushing set is made in the USA and fit Evo 8-9.
|
|
|
|
ENERGY SUSPENSION SHIFTER BASE BUSHINGS
These help to create a strong, solid feel from your shifter. This kit fits Evo VIII-IX.
Price: $12.00
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | |