DSM
|
EVO
|
EVO X
|
3000GT
|
GTR
|
BIKES
|
SUBARU
|
90-99 DSM FUEL SYSTEM COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
STM FUEL TANK TO RAIL KIT
The STM Fuel Tank to Rail Kit comes with everything you'll need to replace your old, rusty fuel lines and your stock, restrictive fuel filter from your factory sending unit/fuel tank to the rail. Our -6AN kit can be used with your stock sending unit, but if you need some serious fuel, our -8AN kit is designed for the aftermarket kits such as the Full Blown Kits (below). Click for more info.
|
|
|
|
|
STM FUEL RETURN KITS
Now made exclusively with Russell ProClassic nylon hose. It's MUCH easier to work with, extremely lightweight and it will not scratch paint. Choose from the standard -10/-6 Fuelab Regulator or the new Mini -6/-6. Includes all fittings to make this kit safe for E85, race gas and methanol. Click for more Info.
|
|
|
|
|
STM -6AN FUEL FILTER TO RAIL KIT
Our STM Feed Kit (Filter to Rail) includes all -6AN fittings, hardware and ProClassic line to go from your stock fuel filter location to your fuel rail inlet. Our new kit includes ALL anodized fittings to accomodate all types of fuels, so it's safe to use with E-85, Methanol and race gas. Click for more info.
Price: $76.00
|
|
|
|
|
STM FUEL PUMP RE-WIRE KIT
The STM kit comes with everything shown to safely and reliably get your fuel pump the power it needs! Includes: relay, relay pigtail, 16' power cable, 3' ground cable, 2 10 gauge ring terminals, in-line fuse holder, 30 amp fuse, 5 cable ties, black wire loom and step by step instructions.
Price: $30.00
|
|
|
|
|
-6AN STM FUEL RAIL FITTINGS
Our STM -6AN aluminum fuel rail fittings for the 90-99 DSM are machined in Rochester, NY and will include 2 stainless allen cap bolts and lock washers to fasten to your fuel rail. 95-99 DSM use the short fitting pictured left as both inlet and outlet. 90-94 DSM use the short fitting as the inlet, the longer as the outlet.
|
|
|
|
|
-8AN STM FUEL RAIL FITTING
Our new STM -8AN aluminum fuel rail fittings are machined in Rochester, NY and will include 2 stainless allen cap bolts and lock washers to fasten to your fuel rail. 95-99 DSM inlet/outlet.
Price: $35.00
|
|
|
|
|
INJECTOR DYNAMICS 2200cc (Set of 4)
The new Injector Dynamics ID2000 flows 2200cc/min at 3 bar (43.5psi) and is high impedance. That means no injector resistor or injector driver is needed. With the capability of running up to 130psi and flowing 3700cc/min, the needs for running multiple injectors per cylinder are gone on all but the most demanding methanol applications.
Price: $1000.00
|
|
|
|
|
INJECTOR DYNAMICS 1000cc (Set of 4)
Bosch's newest generation injectors are now available in a 1000cc high impedance injector!!These are a 48mm long body, shorter than normal injectors. The adaptor tops make them "normal" 60mm length. These have a droplet size comparable to a 600cc Siemens injector and way better spray pattern and atomization than any other 1000cc injector on the market.
Price: $500.00
|
|
|
|
|
INJECTOR DYNAMICS 725cc (Set of 4)
Injector Dynamics has done it again, now in a 725cc version! These are a 48mm long body, shorter than normal injectors. The adaptor tops make them "normal" 60mm length. The proper battery comp values are also provided with each set so you can set it up in your computer and have consistent a/f ratios as battery voltage fluctuates. Most other injectors don't offer that information at anything other than 1 voltage level.
Price: $500.00
|
|
|
|
|
ID WIRELESS ADAPTOR CLIPS
Plug and play adaptor to allow direct plug in of OBD1/EV1 injector clips to Injector Dynamics ID725 & ID1000 injectors. These adaptors will give you a plug and play installation for any application with the typical rectangle injector connector, known as the EV1 connector. OBD1 Honda applications, EVO 9 applications, and any application with older style RC, Delphi, Precision, etc injectors.
Price: $45.00
|
|
|
|
|
FIC BLUE MAX INJECTORS (2150CC)
2150cc Saturated / High Impedance Ball & Seat Injectors fit 90-99 DSM & Evo VIII-IX. These are the largest high impedance injector ever! Great linearity and idle will work at elevated fuel pressure. Best injector for E85 applications! Set of 4 injectors includes pigtails. DO NOT USE WITH "Q16" or OTHER OXYGENATED FUELS!
Price: $780.00
|
|
|
|
|
FIC BLUE MAX INJECTORS (1680CC)
1680cc BlueMAX Injector Set: Saturated / High Impedance Ball & Seat Injectors. Great linearity and idle. Will work at elevated fuel pressure. Best injector for E85 or other high volume fuels! These injectors do not require a resistor pack or P&H drivers. DO NOT USE WITH "Q" or OTHER MTBE OXYGENATED FUELS.
Price: $695.00
|
|
|
|
|
FIC BLUE MAX INJECTORS (1250-1650CC)
FIC's brand new BlueMAX Injector Series offer 100cc increments from 1250 up to 1850cc injectors!
Peak & Hold, Low Impedance Ball & Seat Injectors. Sold as a set of 4.
|
|
|
|
|
FIC HIGH-Z INJECTORS (1100CC)
Set of 4 1100cc Saturated / High Impedance Ball & Seat Injectors. (High-Z) (20% larger than 1000cc Bosch EV14 injectors.) Plug & Play fit to OEM harness. Resistor pack removal recommended. 90-99 DSM.
Price: $495.00
|
|
|
|
|
FIC HIGH-Z INJECTORS (900-775-650CC)
Set of 4 Saturated / High Impedance Ball & Seat Injectors. Latest injector technology. Great linearity and short pulse width repeatability. Resistor pack removal recommended. 900cc includes pigtails PGT USC4 or add P&Play adaptors PADPUtoD4. 775/650 requires pigtails PGT USC4 or P&Play adaptors PADPUtoD4. 90-99 DSM.
|
|
|
|
|
FIC LOW-Z INJECTORS (650-1150CC)
All FIC's below are Peak & Hold, Low Impedance Injectors (Low-Z.) Sold as a set of 4.
|
|
|
|
|
FUEL INJECTOR SEAL KIT
This set comes with VITON custom lower seals for Fuel Injector Clinic injectors which can handle more heat and boost.
Price: $25.00
|
|
|
|
|
FIC RESISTOR PACK DELETE PLUG
FIC Resistor Pack Delete Plug: To avoid cutting and splicing your resistor box harness, simply remove the resistor box and plug in the FIC Resistor Box Delete Plug. Easy! This plug will work with DSM and EVO 8/9. For use when replacing OEM or aftermarket low impedance injectors with high impedance injectors.
Price: $22.00
PLRESBOX |
|
|
|
|
US CAR/EV6 DENSO PLUG ADAPTORS (PADPUtoD4)
Set of 4 US Car/EV6 (female) to Denso (male) injector plug adaptors. Fuel Injector Clinic plug and play adaptors allow installation of aftermarket injectors without modification to the factory wiring harness in your vehicle. Our plug and play adaptors feature the female plug to match the injector, 20 gauge wires 4cm in length, and the appropriate male plug to match the factory wiring harness.
Price: $60.00
PADPUtoD4 |
|
|
|
|
USC/EV6 CONNECTORS W/ PIGTAILS (PGT USC4)
Set of 4 USC/EV6 Injector Connectors with Pigtails. PGT USC4
Price: $32.00
PGT USC4 |
|
|
|
|
PTE FUEL INJECTORS
Precision Turbo & Engine fuel injectors from 440cc up to 1200cc. 90-99 DSM.
|
|
|
|
|
PTE FUEL INJECTOR SEAL KIT
Precision Turbo Fuel Injector Seal Kit for 4 injectors. Mitsubishi 580cc thru 1000cc Injectors.
Price: $21.00
|
|
|
|
|
AEM HIGH VOLUME FUEL RAIL BLACK
AEM High Volume fuel rails feature a 1/2" fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes.
Price: $167.00
|
|
|
|
|
FIC FUEL RAIL
FIC'S 90-99 DSM Fuel Rail is custom machined and anodized for E85 or race fuels. AN fittings increase the flow to the first injector. Fuel rail ID is 11/16" (larger than -10!) Includes 3 mounting spacers and bolts.
|
|
|
|
|
AEROMOTIVE FUEL RAIL
Fits all 90-99 DSM and is designed to work with factory injectors or FIC style. Comes with 3 stainless steel bolts. Billet mounting bracket included for direct, bolt on installation.
Price: $159.00
|
|
|
|
|
AEROMOTIVE INJECTED BYPASS REGULATOR
Performance EFI regulator designed for medium to high horsepower applications. This regulators features Aeromotive's high-flow design, superb pressure control and legendary durability. On the street and at the track, this pressure regulator has logged more miles, laps and passes than any other performance EFI regulator in the world! Black finish with -6 AN ports.
13109,13109B |
|
|
|
|
FUELAB ELECTRONIC FUEL PRESSURE REGULATORS
The new FUELAB Electronic Fuel Pressure Regulator works directly with the Prodigy line of fuel pumps to reduce heat build up and vapor lock conditions related to street/strip operation. Set the pressure mechanically like a traditional bypass regulator, the let the electronic regulator's demand based speed control take care of the rest!
|
|
|
|
|
FUELAB HIGH FLOW FUEL PRESSURE REGULATORS
Utilizing a massive 1/2" return orifice and -10AN ports, these regulators hold no bounds. With the bypass capability over 5 GPM at 5 PSI, this new regulator can handle blow through carbureted applications well over 1800 H.P., and for EFI applications using belt driven fuel pumps; even further (with a flattened regulation slope).
|
|
|
|
|
FUELAB MINI FUEL PRESSURE REGULATORS
FUELAB Mini 535 Series 1:1 Fuel Pressure Regulators have all the same great features as our 515 series, only smaller and weigh 50% less. They accept port style and non-port style union fittings without interference. The 535 Series Fuel Pressure Regulator has a -6AN return port located on the bottom.
|
|
|
|
|
FUELAB | FUEL PRESSURE REGULATORS
FUELAB 515 Series Fuel Pressure Regulators are designed with performance and flexibility in mind. They accept port style and non-port style union fittings without interference. Available in 6 colors with -10AN or -6AN inlets, supporting fuel injected applications up to 90 PSI. Both the 515 Series Fuel Pressure Regulator have a -6AN return port located on the bottom.
|
|
|
|
|
JMF 90-94 FUEL CELL
If your looking to shed some unwanted pounds or build a high output fuel system, JMF's 1G DSM Bolt-In Fuel Cell will do just that. Capacity is 7 gallons, unit bolts to existing mounting points and retains the OEM filler neck as well. Click for more info.
Starting at $420
|
|
|
|
|
BUSCHUR DOUBLE PUMPER FUEL KIT (1G 90-94)
This is the Buschur Racing double pumper drop in fuel system for the 1G DSM. This item can work in AWD or FWD applications. It is a true drop in, replacement unit that requires only 1 wire to be hooked up.
Price: $470.00
|
|
|
|
|
FULL BLOWN DUAL PUMP HANGERS
Full Blown's Dual Pump Hangers will allow you to drop two Walbro fuel pumps into the stock DSM gas tank. The days of drilling the stock gas tank and running loud external pumps are over!
|
|
|
|
|
WELDON RACING FUEL PUMP | 2345-A | 2400 HP
If you are building a high HP drag car and need reliable fuel delivery up to 2400 HP... Click here. Weldon's Racing Pump 2345-A is versatile in mounting capabilities, 100% serviceable and accepts all kinds of fuels.
Price: $1350.00
|
|
|
|
|
AEROMOTIVE 340 STEALTH FUEL PUMP
We have tested this pump on our Mustang Dyno and finally maxed it out at 527 HP on E85. If you are in this power range, this is a great fuel pump!
|
|
|
|
|
AEM 320LPH HIGH FLOW FUEL PUMP
AEM's High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. Universal fitment application.
Price: $100.00
50-1000 |
|
|
|
|
WALBRO 450 LPH E85 FUEL PUMP
Walbro has just released this new 450 LPH, E85 compatible fuel pump. The dimensions are the same, but this pump features a built in harness, sealing in all electrical connections with a female Packard connector to avoid damage from the E85 fuel. Purchase the pump alone or with universal install kit as pictured.
F90000267,400-0085 |
|
|
|
|
WALBRO 400 LPH FUEL PUMP
Walbro's 400 Liter Per Hour High Performance Fuel Pump and Universal Install Kit. Purchase the pump alone or with the install kit. Add the STM Fuel Pump Rewire Kit with your purchase and save $5.
|
|
|
|
|
WALBRO 255 IN-LINE FUEL PUMP
Walbro's in-line 255 fuel pump. Mounts outside the tank and can be coupled with another pump for extra fuel. Sold as pump only or include the install kit and 2 -6AN Russell fittings.
Install Kit includes: (2) 9mm barb fittings and mounting adapter.
|
|
|
|
|
WALBRO FUEL PUMP & INSTALL KITS
Complete install kits. All the fuel you will need from stock turbo set up's all the way to 500 hp. The 190 will be just fine with a set of injectors and the stock turbo and the 255HP will support you to 500 whp!
Price: $95.00
|
|
|
|
|
WALBRO INSTALL KITS & PARTS
Walbro fuel pump install kits and replacement parts. 90-94 AWD, 90-94 FWD and 95-99 AWD/FWD models.
|
|
|
|
|
DEATSCHWERKS DW300 FUEL PUMP
The DW300 fuel pump flows 320 litres per hour and has been specifically designed and tested for compatibility with gasoline and ethanol. DeatschWerks products are manufactured and sold for non-road vehicles used solely for competition. 2G AWD and 1G FWD only.
|
|
|
|
|
DEATSCHWERKS DW200 FUEL PUMP
Deatschwerks DW200 In-Tank Fuel Pump w/ Install Kit has been specifically designed and tested for compatibility with gasoline and ethanol. DeatschWerks products are manufactured and sold for non-road vehicles used solely for competition. 2G AWD and 1G FWD only.
|
|
|
|
|
BOSCH 044 IN-LINE FUEL PUMP
Designed to be mounted outside of your gas tank, providing 300LPH of flow and can be used in sequence with an in-tank Walbro fuel pump. Click for more info.
Price: $220.00
|
|
|
|
|
FUELAB PRODIGY IN-LINE FUEL PUMPS
Prodigy Fuel Pumps are the auto aftermarket's first and only speed controllable DC brushless driven fuel pump. With digital fuel delivery you get unheard of electro-mechanical efficiencies in a package half the size of competing pumps (3lb, 6.9 x 2.63") with 6 colors and 4 models to choose from rating up to 1800 HP! If you plan on making serious power, these are the pumps you should be looking at. Click for all applications. Click for more info.
Starting at $408
|
|
|
|
|
FUELAB 818 SHORT FUEL FILTERS
FUELAB In-Line Fuel Filters keep your engine running clean featuring male AN / 37° flared fitting end caps, so you can attach them directly to other fuel system components. All six colors are available in -6, -8 and -10AN with 10 micron paper filter elements. Excllent filtration and easy to install compact design. Click for all applications.
Starting at $82
|
|
|
|
|
FUELAB 828 LONG FUEL FILTERS
FUELAB In-Line Fuel Filters keep your engine running clean featuring male AN / 37° flared fitting end caps, so you can attach them directly to other fuel system components. All six colors are available in -6, -8 and -10AN with 10 micron paper filter elements. These long filters offer more filtration and longevity. Click for all applications.
Starting at $99
|
|
|
|
|
FUELAB | REPLACEMENT FILTER ELEMENTS
All racers demand top engine performance, but what ensures that? Clean fuel! The celluose (paper) element is for gas and diesel only where you may use the stainless filters with E85. Available for the 5" and 3" filters. The finer the micron, the better the filtration. Click for all applications.
Starting at $11
|
|
|
|
|
RUSSELL FUEL FILTERS
The Russell Competition fuel filters are offered in -6 and -8 male outlets, which help them flow up to 130 gph. Russell incorporated a disc-type element, which filters down to 40 microns and can be cleaned or replaced. Manufactured from billet aluminum with a polished aluminum, black anodized finish, the Russell Competition fuel filters make a great addition to your fuel system.
650133,650103 |
|
|
|
|
0-100 PSI FUEL PSI GAUGE
1.5" diameter liquid-filled gauges have a black face with white pointer and numbers. Liquid-filled for accurate, steady readings. Gauges have a 1/8" NPT center back male fitting.
Price: $19.00
|
|
|
|
|
E85 TESTER
Simply and accurately check the percentage of ethanol content in your E85 fuel. Simple to use, just add water to the lowest line and fill to the highest line with your fuel. Shake and let set for a few minutes. There will be a line of separation telling you what percentage your fuel really is. Yes its that easy.
Price: $17.00
|
|
|
|
|
AEM WATER INJECTION KIT
The Water Injection Kit is a safe and economical way to reduce air inlet temperatures and to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without having to run higher-octane fuel. This is the most complete kit available on the market straight out of the box- no additional parts required. Available with a 1 or 5 gallon tank.
30-3000,30-3001 |
|
|
|
|
ZEX EFI WET KIT BLACKOUT (55-75hp)
These ZEX Blackout nitrous systems are unprecedented for looks, performance, and power potential. ZEX "Wet" Nitrous Kits feature several revolutionary patented components such as the Active Fuel Control, Electronic TPS switch and Full Shear Technology. All the necessary components are included within the kits to get you up and running in just a few hours!
Price: $650.00
|
|
|
|
|
ZEX EFI "WET" KIT (55-75hp)
ZEX "Wet" Nitrous Kits feature several revolutionary patented components such as the Active Fuel Control, Electronic TPS switch and Full Shear Technology. All the necessary components are included within the kits to get you up and running in just a few hours!
Price: $600.00
|
|
|
|
|
NITROUS BOTTLE PRESSURE GAUGE
The ZEX liquid filled gauge kit is specifically designed for -4AN and-6AN sized nitrous delivery lines and includes the 0-1500 psi range gauge and an in-line matching -AN adapter.
|
|
|
|
|
NITROUS BOTTLE HEATERS
Automatically maintains optimum bottle pressure with precision thermostats.
Utilizes velcro straps for fast and easy installation on the bottle and electrical components are pre-assembled and molded into the heater for ease of installation. Or choose the NEW Plug-in heater with no wires to hook-up, just plug-in to your cigarette lighter or power point.
|
|
|
|
|
REMOTE BOTTLE VALVE OPENER
Okay, you're ready to blow away the competition but you forgot to open your nitrous bottle. No problem! ZEX offers a cool billet aluminum Remote Bottle Valve Opener that allows you to open the valve instantly from your driver's seat. Plus, the ZEX system provides total flow performance, ensuring that your system works at 100% every time.
Price: $255.00
|
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |