DSM
|
EVO
|
EVO X
|
3000GT
|
GTR
|
BIKES
|
SUBARU
|
3000GT VR4 & STEALTH R/T | FUEL SYSTEM COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
STM FUEL FILTER TO RAIL KIT
Our Fuel Filter to Fuel Rail kit for the turbo 3000gt and Stealth comes with everything you see here and is super easy to assemble using Russell's lightweight, attractive ProClassic Fuel Line and Fittings. Our black anodized fuel rail fittings are twice the size as stock and we've included 2 stainless hex caps and lock washers.
Price: $89.00
|
|
|
|
|
STM FUEL TANK TO RAIL KIT
The STM Fuel Tank to Rail Kit comes with everything you'll need to replace your old, rusty fuel lines and your stock, restrictive fuel filter from your factory sending unit/fuel tank to the rail. Our -6AN kit can be used with your stock sending unit, but if you need some serious fuel, our -8AN kit is designed for the aftermarket kits.
|
|
|
|
|
STM FUEL PUMP RE-WIRE KIT
Our STM kit comes with relay, relay pigtail, 16' power cable, 3' ground cable, 2 10 gauge ring terminals, in-line fuse holder, 30 amp fuse, 5 cable ties, black wire loom and step by step instructions to get your fuel pump the power it needs! We designed this kit for the DSM/Evo croud, but they will work for just about any car.
Price: $30.00
|
|
|
|
|
FIC INJECTORS (LOW-Z) 550cc-1150cc
Fuel Injector Clinic Peak & Hold, Low Impedance Injectors for turbo 3000GT and Stealth. Set of 6 injectors available from 550cc to 1150cc.
|
|
|
|
FIC INJECTORS (LOW-Z) LUCAS 550cc
Fuel Injector Clinic LUCAS Peak & Hold, Low Impedance Disc Injectors for turbo 3000GT and Stealth. Set of 6 550cc injectors.
Price: $360.00
|
|
|
|
FIC INJECTOR SEAL KIT
Complete seal kit for 6 cyl 300GT/VR4 style injectors. Fits all FIC 135 injectors - These are not seal kits for OEM Injectors!
Price: $30.00
|
|
|
|
AEROMOTIVE INJECTED BYPASS REGULATOR
Performance EFI regulator designed for medium to high horsepower applications. This regulators features Aeromotive's high-flow design, superb pressure control and legendary durability. On the street and at the track, this pressure regulator has logged more miles, laps and passes than any other performance EFI regulator in the world! Black finish with -6 AN ports.
13109,13109B |
|
|
|
|
FUELAB ELECTRONIC FUEL PRESSURE REGULATORS
The new FUELAB Electronic Fuel Pressure Regulator works directly with the Prodigy line of fuel pumps to reduce heat build up and vapor lock conditions related to street/strip operation. Set the pressure mechanically like a traditional bypass regulator, the let the electronic regulator's demand based speed control take care of the rest!
52901,52902 |
|
|
|
|
FUELAB HIGH FLOW FUEL PRESSURE REGULATORS
Utilizing a massive 1/2" return orifice and -10AN ports, these regulators hold no bounds. With the bypass capability over 5 GPM at 5 PSI, this new regulator can handle blow through carbureted applications well over 1800 H.P., and for EFI applications using belt driven fuel pumps; even further (with a flattened regulation slope).
56501,56504 |
|
|
|
|
FUELAB MINI FUEL PRESSURE REGULATORS
FUELAB Mini 535 Series 1:1 Fuel Pressure Regulators have all the same great features as our 515 series, only smaller and weigh 50% less. They accept port style and non-port style union fittings without interference. The 535 Series Fuel Pressure Regulator has a -6AN return port located on the bottom.
53501 |
|
|
|
|
FUELAB | FUEL PRESSURE REGULATORS
FUELAB 515 Series Fuel Pressure Regulators are designed with performance and flexibility in mind. They accept port style and non-port style union fittings without interference. Available in 6 colors with -10AN or -6AN inlets, supporting fuel injected applications up to 90 PSI. Both the 515 Series Fuel Pressure Regulator have a -6AN return port located on the bottom.
51501,51502 |
|
|
|
|
FUELAB 818 SHORT FUEL FILTERS
FUELAB In-Line Fuel Filters keep your engine running clean featuring male AN / 37° flared fitting end caps, so you can attach them directly to other fuel system components. All six colors are available in -6, -8 and -10AN with 10 micron paper filter elements. Excllent filtration and easy to install compact design. Click for all applications.
Price: $82.00
81803,81802,81801 |
|
|
|
|
FUELAB 828 LONG FUEL FILTERS
FUELAB In-Line Fuel Filters keep your engine running clean featuring male AN / 37° flared fitting end caps, so you can attach them directly to other fuel system components. All six colors are available in -6, -8 and -10AN with 10 micron paper filter elements. These long filters offer more filtration and longevity. Click for all applications.
Price: $99.00
82801,82802,82803 |
|
|
|
|
FUELAB | REPLACEMENT FILTER ELEMENTS
All racers demand top engine performance, but what ensures that? Clean fuel! The celluose (paper) element is for gas and diesel only where you may use the stainless filters with E85. Available for the 5" and 3" filters. The finer the micron, the better the filtration. Click for all applications.
Price: $11.00 - $45
71801,71802,71805,71806 |
|
|
|
|
RUSSELL FUEL FILTERS
The Russell Competition fuel filters are offered in -6 and -8 male outlets, which help them flow up to 130 gph. Russell incorporated a disc-type element, which filters down to 40 microns and can be cleaned or replaced. Manufactured from billet aluminum with a polished aluminum, black anodized finish, the Russell Competition fuel filters make a great addition to your fuel system.
650133,650103 |
|
|
|
|
WELDON RACING FUEL PUMP | 2345-A | 2400 HP
If you are building a high HP drag car and need reliable fuel delivery up to 2400 HP... Click here. Weldon's Racing Pump 2345-A is versatile in mounting capabilities, 100% serviceable and accepts all kinds of fuels.
Price: $1350.00
|
|
|
|
|
FULL BLOWN DUAL FUEL PUMP HANGER
Full Blown's Dual Pump Hanger is CNC machined from top notch billet aluminum then anodized for a long lasting protective finish. It is capable of up to 600hp on factory fuel rails and higher capacity possible with modified fuel systems. Click for more info!
|
|
|
|
|
AEROMOTIVE 340 STEALTH FUEL PUMP
We have tested this pump on our Mustang Dyno and finally maxed it out at 527 HP on E85. If you are in this power range, this is a great fuel pump!
Price: $170.00
|
|
|
|
|
AEM 320LPH HIGH FLOW FUEL PUMP
AEM's High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. Universal fitment application.
Price: $100.00
50-1000 |
|
|
|
|
WALBRO 450 LPH E85 FUEL PUMP
Walbro has just released this new 450 LPH, E85 compatible fuel pump. The dimensions are the same, but this pump features a built in harness, sealing in all electrical connections with a female Packard connector to avoid damage from the E85 fuel. Purchase the pump alone or with universal install kit as pictured.
F90000267,400-0085 |
|
|
|
|
WALBRO 400 LPH FUEL PUMP
Walbro's 400 Liter Per Hour High Performance Fuel Pump and Universal Install Kit. Purchase the pump alone or with the install kit. Add the STM Fuel Pump Rewire Kit with your purchase and save $5.
|
|
|
|
|
WALBRO 255 HP FUEL PUMPS
Walbro fuel pump kits for the 91-97 twin turbo models include all accessories and installation instructions including an inlet filter that meets or exceeds original equipment specifications and provides improved filtration and durability.
|
|
|
|
|
WALBRO 255 IN-LINE FUEL PUMP
Walbro's in-line 255 fuel pump. Mounts outside the tank and can be coupled with another pump for extra fuel. Sold as pump only or include the install kit.
Install Kit includes: (2) 9mm barb fittings and mounting adapter.
|
|
|
|
|
BOSCH 044 IN-LINE FUEL PUMP
Designed to be mounted outside of your gas tank, providing 300LPH of flow and can be used in sequence with an in-tank Walbro fuel pump. Click for more info.
Price: $220.00
|
|
|
|
|
WALBRO INSTALL KITS & PARTS
Walbro fuel pump install kits and replacement parts. 91-99 3000GT VR4 & StealthR/T.
|
|
|
|
|
FUELAB | PRODIGY IN-LINE FUEL PUMPS
Prodigy Fuel Pumps are the auto aftermarket's first and only speed controllable DC brushless driven fuel pump. With digital fuel delivery you get unheard of electro-mechanical efficiencies in a package half the size of competing pumps (3lb, 6.9 x 2.63") with 6 colors and 4 models to choose from rating up to 1800 HP! If you plan on making serious power, these are the pumps you should be looking at. Click for all applications.
Price: $408.00 - $650
|
|
|
|
|
0-100 PSI FUEL PSI GAUGE
1.5" diameter liquid-filled gauges have a black face with white pointer and numbers. Liquid-filled for accurate, steady readings. Gauges have a 1/8" NPT center back male fitting.
Price: $19.00
|
|
|
|
|
E85 TESTER
Simply and accurately check the percentage of ethanol content in your E85 fuel. Simple to use, just add water to the lowest line and fill to the highest line with your fuel. Shake and let set for a few minutes. There will be a line of separation telling you what percentage your fuel really is. Yes its that easy.
Price: $17.00
|
|
|
|
|
AEM WATER INJECTION KIT
The Water Injection Kit is a safe and economical way to reduce air inlet temperatures and to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without having to run higher-octane fuel. This is the most complete kit available on the market straight out of the box- no additional parts required. Available with a 1 or 5 gallon tank.
30-3000,30-3001 |
|
|
|
|
ZEX EFI WET KIT BLACKOUT (55-75hp)
These ZEX Blackout nitrous systems are unprecedented for looks, performance, and power potential. ZEX "Wet" Nitrous Kits feature several revolutionary patented components such as the Active Fuel Control, Electronic TPS switch and Full Shear Technology. All the necessary components are included within the kits to get you up and running in just a few hours!
Price: $650.00
|
|
|
|
|
ZEX EFI "WET" KIT (55-75hp)
ZEX "Wet" Nitrous Kits feature several revolutionary patented components such as the Active Fuel Control, Electronic TPS switch and Full Shear Technology. All the necessary components are included within the kits to get you up and running in just a few hours!
Price: $600.00
|
|
|
|
|
NITROUS BOTTLE PRESSURE GAUGE
The ZEX liquid filled gauge kit is specifically designed for -4AN and-6AN sized nitrous delivery lines and includes the 0-1500 psi range gauge and an in-line matching -AN adapter.
|
|
|
|
|
NITROUS BOTTLE HEATERS
Automatically maintains optimum bottle pressure with precision thermostats.
Utilizes velcro straps for fast and easy installation on the bottle and electrical components are pre-assembled and molded into the heater for ease of installation. Or choose the NEW Plug-in heater with no wires to hook-up, just plug-in to your cigarette lighter or power point.
|
|
|
|
|
REMOTE BOTTLE VALVE OPENER
Okay, you're ready to blow away the competition but you forgot to open your nitrous bottle. No problem! ZEX offers a cool billet aluminum Remote Bottle Valve Opener that allows you to open the valve instantly from your driver's seat. Plus, the ZEX system provides total flow performance, ensuring that your system works at 100% every time.
Price: $255.00
|
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |