 |
|
|
|
EVOLUTION VIII-IX - WASTEGATES
///
BACK TO TOP |
|
|
TiAL MV-S 38MM V-BAND WASTEGATE
The MV-S 38mm unit is much more compact than its F38 predecessor - standing only 3.7" in height. The V-Band flanges make installation pain free, the three lower & two upper air ports make connecting pressure sources and boost controllers easy! Available in all 5 TiAL colors.
Universal Application.
MVS |
|
TiAL MV-R 44MM V-BAND WASTEGATE
The MV-R 44mm wastegate is more compact than any current 44 or 46mm wastegate on the market. You get two top air ports and three bottom air ports for easy install. Available in all 5 TiAL colors.
Universal Application.
MVR |
|
PTE PW46 EXTERNAL WASTEGATE
Featuring a black anodized billet aluminum wastegate cap, and a Kevlar reinforced silicone diaphragm, these units can be used in any kit or setup that currently utilizes a V-band style 44mm gate. Includes all the necessary hardware (flanges, clamps, springs, etc), and can accommodate a wide range of boost pressures (anywhere from 1.5PSI up to 25.5PSI).
Universal Application.
PW46 |
|
PTE PW39 EXTERNAL WASTEGATE
Featuring a black anodized billet aluminum wastegate cap, and a Kevlar reinforced silicone diaphragm, these units were designed to be a direct replacement for other existing 44mm wastegate flanges, but will work best with the flange provided. Includes all the necessary hardware (flanges, clamps, springs, etc), and can accommodate a wide range of boost pressures (anywhere from 1.5PSI up to 25.5PSI).
Universal Application.
PW39 |
|
|
EVOLUTION VIII-IX - WASTEGATE ACTUATORS
///
BACK TO TOP |
|
|
TURBOSMART IWG75 EVO 8 INTERNAL WASTEGATE ACTUATORS
Better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the IWG is easy to install and requires no special tools or fabrication. Available below in configurations from 10 to 26 PSI.
2003-2005 Evolution VIII.
TS-0601-1102,TS-0601-1142,TS-0601-1182,TS-0601-1222,TS-0601-1242,TS-0601-1262 |
|
TURBOSMART IWG75 EVO 9 INTERNAL WASTEGATE ACTUATORS
Better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the IWG is easy to install and requires no special tools or fabrication. Available below in configurations from 10 to 26 PSI.
2006 Evolution IX.
TS-0601-2102,TS-0601-2142,TS-0601-2182,TS-0601-2222,TS-0601-2242,TS-0601-2262 |
|
FORGE WASTEGATE ACTUATORS
Designed by Forge to replace the original component, this upgrated actuator is serviceable and guaranteed for life. It comes with an upgrated diaphragm and a billet CNC machined aluminium mounting bracket.
2003-2005 Evolution VIII.
2006 Evolution IX.
FMEVACT,FMEVACT,FMPACEV9,FMACEV9 |
|
|
EVOLUTION VIII-IX - INSTALL & REPLACEMENT PARTS
///
BACK TO TOP |
|
|
STM STAINLESS STEEL 38MM WASTEGATE GASKET
The STM 38mm Wastegate Gasket features a 20 gauge thickness, cut from T304 Stainless Steel and made in the USA!
Universal Application.
STM-SSG-38MM |
|
TIAL SPORT 44MM MVR WASTEGATE VALVE SEAT
Tial Sport Stainless Steel 44mm MVR Wastegate Valve Seat.
Universal Application.
MVRVS |
|
TIAL SPORT 38MM MVS WASTEGATE VALVE SEAT
Tial Sport Stainless Steel 38mm MVS Wastegate Valve Seat.
Universal Application.
MVSVS |
|
TIAL MVR & MVS REPLACEMENT WASTEGATE SPRINGS
TiAL Sport MV-R & MV-S Replacement Wastegate Springs. Not for the older style TiAL 38mm, 40mm, 44mm, 46mm and 60mm wastegates.
Universal Application.
MVRPLAIN,MVSBLACK,MVSWHITE,MVSRED,MVSBLUE,MVSYELLOW,MVSGREEN |
|
TIAL SPORT MV-S WASTEGATE REPLACEMENT DIAPHRAGM
TiAL Sport Replacement Diaphragm for the TiAL MV-S 38mm Wastegates.
Universal Application.
MVSDIAASM |
|
TIAL SPORT MV-R WASTEGATE REPLACEMENT DIAPHRAGM
TiAL Sport Replacement Diaphragm for the TiAL MV-R 44mm Wastegates.
Universal Application.
MVRDIAASM |
|
TIAL SPORT 38/41/44MM WASTEGATE REPLACEMENT DIAPHRAGM
TiAL Sport Replacement Diaphragm for the F38, F41 and old-style 38/41/44mm Wastegates.
Universal Application.
3844DIAASM |
|
TIAL REPLACEMENT WASTEGATE AIR FITTING SET
Genuine TiAL Sport 10mm Replacement Wastegate Air Fitting Set for MV-R & MV-S Wastegates. Includes a quantity of two as pictured.
Universal Application.
10MMAFS |
|
VIBRANT PERFORMANCE -3AN MALE BANJO FITTING 10MM X 1.0
Vibrant Performance -3AN Male Banjo Fitting with 10mm x 1.0 Metric thread is made of anodized aluminum and safe for all fluids and E85. Commonly used with TiAL blow off valves and wastegates.
Universal Application.
11512 |
|
VIBRANT PERFORMANCE -4AN MALE BANJO FITTING 10MM X 1.0
Vibrant Performance -4AN Male Banjo Fitting with 10mm x 1.0 Metric thread is made of anodized aluminum and safe for all fluids and E85. Commonly used with TiAL blow off valves and wastegates.
Universal Application.
11512 |
|
TIAL SPORT WASTEGATE PORT PLUG
Genuine TiAL Sport Wastegate Port Plugs for MV-R & MV-S Wastegates. 304 Stainless Steel. Sold individually.
Universal Application.
MVSP |
|
TIAL REPLACEMENT V-BAND WASTEGATE CLAMPS
TiAL Sport Replacement V-Band Wastegate Clamps for 38mm MVS and 44mm MVR wastegates.
Universal Application.
MVSCLI,MVSCLO,44CLI,44CLO |
|
TIAL SPORT WELD-ON WASTEGATE FLANGES (V-BAND)
Genuine Tial 304L stainless steel weld flanges for 38mm and 44mm V-Band wastegates.
Universal Application.
WG44FLI,WG44FLO,MVSFLI,MVSFLO |
|
TIAL SPORT WELD-ON WASTEGATE FLANGES (35MM-38MM)
Genuine Tial 38mm Wastegate Flanges are counter-sunk for discharge piping for easier welding and stronger welded angles. Flanges are available in 1018 Mild Steel and 304L Stainless Steel, threaded (Inlet) and unthreaded (Outlet).
Universal Application.
WG38FLSS,WG38FLSS,WG38FLMS,WG38FLMST |
|
EXTERNAL WASTEGATE BLOCK OFF FLANGE (35-38MM)
You can block off your external gate with this 3/8" thick mild steel flange. If you decide you want it permanent, it's thick enough to be welded right on! Fits any 2-bolt 35-38mm wastegate flange.
Universal Application.
14290 |
|
GRIMMSPEED V-BAND BLOCK OFF PLATES
The GrimmSpeed EWG Block-Off Plate is a solution for the person not able to purchase everything necessary for a full EWG set-up up front. The affordable EWG Block-Off Plate is placed over the side exit to the wastegate. This allows the EWG up-pipe to run without the wastegate. Once the wastegate is purchased, the EWG Block-Off Plate can be easily removed.
Universal Application.
008007,008008 |
|
BLACK SILICONE VACUUM HOSE
STM offers high quality, thick-walled, pure silicone vacuum hose in 3mm, 4mm and 6mm. Vacuum hose is sold by the foot, simply adjust your quantity when checking out.
Sold Per Foot.
FT-VB-012,FT-VB-016,FT-VB-025 |
|
BLACK T-FITTINGS
Black T Vacuum Fittings. 3, 4 and 6mm sizes.
Universal Application.
10110,10109,12926,10108 |
|
|
|
