 |
|
|
|
EVOLUTION VIII-IX - THROTTLE BODIES
///
BACK TO TOP |
|
|
FULL BLOWN CAST 70MM THROTTLE BODY
Comes complete with all hardware and gaskets. Realizing that there is a need for an affordable throttle body with an OEM look and superior quality, Full Blown has done extensive tests on the prototypes to ensure that there are no issues with leaks and to optimize performance. Adapter Plate is available for Stock Intake Manifold.
2003-2006 Evolution VIII & IX.
FBMTB-EVO89-70MMC,FBMTB-EVO89-70MMC |
|
S90 BILLET ALUMINUM THROTTLE BODIES
The S90 series of direct bolt-on throttle bodies are precision CNC machined from AL6061 T6 billet aluminum for increased durability. Available in 68mm, 70mm and 74mm for all Evolution 1-9 models.
1992-2006 Evolution I-IX.
S90-MIT |
|
S90 REPLACEMENT BISS SCREW AND O-RING
S90 Replacement BISS Screw and O-Ring for S90 Throttle Bodies.
2003-2006 Evolution VIII & IX.
S90-BISS |
|
OEM MITSUBISHI EVO8/9 BISS SCREW SET
Genuine OEM Mitsubishi Biss Screw Set.
2003-2006 Evolution VIII & IX.
[OEM-EVO-BISS]
MD614948(x1),MD608806(x1) |
|
STM EVO 8/9 HP THROTTLE BODY SHAFT SEALS
STM High Pressure Throttle Body Shaft Seals. Sold as a pair. When these seals wear out, they can cause leaks, sticking, and jamming of the throttle plate. We tested a car on our dyno at STM with OEM leaky seals... When the seals were replaced, we picked up 20 whp and 20 ft pounds! Incredible Boost Leak!
2003-2006 Evolution VIII & IX.
STM-TB-SEALS |
|
FULL BLOWN 70MM THROTTLE BODY ADAPTER PLATE
The Full Blown Throttle Body Adapter Plate allows you to run your 70mm Full Blown Throttle Body with a stock intake manifold.
2003-2006 Evolution VIII & IX.
|
|
BUSCHUR RACING 65MM PORTED THROTTLE BODY GASKET
These are included when you purchase a new Buschur Racing Ported Throttle Body, but if you've damaged yours or bought a used throttle body, save yourself the DIY headache and buy this Buschur Racing 65mm, port-matched, OEM Mitsubishi Gasket.
2003-2006 Evolution VIII & IX.
BUSCHUR |
|
TORQUE SOLUTION THERMAL THROTTLE BODY GASKET
The Torque Solution Thermal Throttle Body Gasket uses a proprietary gasket material that lowers intake temps by reducing heat transfer. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free. They are also great for oversized throttle body setups.
2003-2006 Evolution VIII & IX.
TS-TBG-015 |
|
S90 REPLACEMENT THROTTLE BODY GASKETS
S90 Replacement Throttle Body Gaskets are available in 68mm, 70mm and 74mm for the Evolution I-IX models. Fits S90 throttle body only.
For S90 Throttle Body.
S90-GSK-4G63 |
|
OEM MITSUBISHI EVO 8/9 THROTLE BODY GASKET
OEM Mitsubishi Throttle Body Gasket.
2003-2006 Evolution VIII & IX.
MD180361 |
|
OEM MITSUBISHI EVO 8/9 THROTTLE BODY BOLT
Genuine OEM Mitsubishi Throttle Body Bolt.
2003-2006 Evolution VIII & IX.
MF241264 |
|
THROTTLE BODY CLIP
Genuine OEM Mitsubishi Throttle Body Clip fits the Evolution VIII-IX & 95-99 2G DSM.
2003-2006 Evolution VIII & IX.
MD614246 |
|
|
EVOLUTION VIII-IX - INTAKE MANIFOLDS
///
BACK TO TOP |
|
|
STM PORTED OEM INTAKE MANIFOLD
Looking for something to gain a bit up-top while still retaining your low end power? This is the manifold for you. Runners are port-matched to a factory gasket. Throttle body is port-matched to accept a 65mm TB. Fits Evo VIII-IX. The port work is $250 + a $150 core charge for your intake manifold which is refunded when STM receives it.
2003-2006 Evolution VIII & IX.
STM-MN137746 |
|
STM EVO 8/9 OEM MITSUBISHI INTAKE MANIFOLD BOLT KIT
Comprised of all OEM Mitsubishi hardware, the STM Intake Manifold Bolt Kit includes every bolt, nut, washer and stud to replace your rusty, old bolts.
2003-2006 Evolution VIII & IX.
[STM-KIT-OEM-EVO89-IMBK]
MF241258(x1),MU430002(x2),MF241256(x6),MF241284(x1),MF450406(x2),MS401452(x2)
|
|
OEM MITSUBISHI EVO 8/9 INTAKE MANIFOLD GASKET
Genuine OEM Mitsubishi Intake Manifold Gasket fits all 2003-2006 Evolution 8/9 models.
2003-2006 Evolution VIII & IX.
1540A019 |
|
|
EVOLUTION VIII-IX - EGR PLATES
///
BACK TO TOP |
|
|
STM EGR REMOVAL PLATE
The STM EGR Removal Plate is a bit nicer than other ones we've seen as the bolts actually sit flush into the counter-sunk, aluminum block off plate, allowing you to remove your EGR system completely and free up some engine space.
2003-2006 Evolution VIII & IX.
STM-4G63-EGR,MD119127 |
|
STM EGR BLOCK OFF PLATE
The STM EGR Block Off Plate allows you to block your EGR system by sandwiching it between your EGR valve and the intake manifold, keeping a stock appearance. Don't forget to add the OEM EGR gasket.
2003-2006 Evolution VIII & IX.
STM-4G63-EGRBK,MD119127 |
|
OEM MITSUBISHI EGR GASKET
Genuine OEM Mitsubishi EGR Gasket.
2003-2006 Evolution VIII & IX.
MD119127 |
|
|
|
