|
EVOLUTION VIII-IX - FUEL PACKAGES & KITS
///
BACK TO TOP |
|
|
STM EVO 8/9 -6AN FUEL FEED & RETURN KIT WITH RAIL
The STM -6AN Fuel Feed & Return Kit with Rail & Regulator is designed for the Evolution VIII & IX models and makes it easy to clean up your fuel system from hard line to hard line. STM includes every fitting you'll need for a perfect, hassle-free install. The STM Fuel Rail is available in black or blue and you can pair it with your choice of Fuelab regulator color and all components are safe for corrosive race fuels, gas and E85.
2003-2006 Evolution VIII & IX.
STM-EVO89-FFRR |
|
STM DOUBLE-PUMPER FUEL FEED KIT
The STM Double-Pumper Fuel Feed Kit is designed for the Evo VIII-IX running the Buschur Racing "Double Pumper" Fuel Pump Kit. The STM Feed Kit uses a Weldon fuel filter and TRS Y-block and includes all the fittings and line you'll need to run from the fuel sending unit to your -8AN fuel rail fitting and every part included is 100% E85 safe!
2003-2006 Evolution VIII & IX.
STM-EVO-BRDP-FFK |
|
STM TRIPLE-PUMP FUEL DELIVERY KIT
The STM Triple-Pump Fuel Delivery Kit is your bolt-in solution to deliver all the fuel you need up to... well, we havent found the limit yet. STM supplies you with everything you'll need from the gas tank to your -8AN or -10AN fuel rail inlet. This kit has been tested in cars trapping over 160 MPH and at over 50 psi with no signs of running out of fuel, and we have actually not found the limits yet.
2003-2006 Evolution VIII & IX.
STM-EVO89-3FDK |
|
STM E85 BASIC FUEL PRESSURE REGULATOR (FPR) KIT
The STM Basic FPR Kit for the Evolution VIII-IX includes all fittings, hardware and line to go from your fuel rail to factory-style or -6AN outlet regulator and back to the return line. The STM Basic FPR Kit includes a -6AN Fuelab Regulator (Standard or Mini) in your choice of 6 colors.
100% E85 safe.
2003-2006 Evolution VIII & IX.
STM-EVO89-BASIC-FPRK |
|
STM E85 FUEL FEED KIT (HARD LINE TO RAIL)
The STM E85 Fuel Feed Line Kit for the Evo VIII-IX is 100% E85 safe and includes everything needed to feed your fuel rail from your factory hard line in the engine bay. Lightweight black braided line won't scratch your paint and is a direct replacement to your factory fuel line.
2003-2006 Evolution VIII & IX.
STM-EVO89-FFRK |
|
STM EVO 8/9 -6AN FUEL TANK TO RAIL KIT
If your fuel lines are in danger of becoming rusted and damaged, STM now offers the solution! The STM Evo 8/9 -6AN Fuel Tank to Rail Kit fits all the 2003-2006 Evolution VIII & IX models and is fully safe for E85, gas and corrosive race fuels.
Evolution VIII & IX.
STM-EVO89-FT |
|
STM EVO 8/9 WALBRO 450 PACKAGE DEAL
The STM Walbro 450 Package Deal for Evo VIII & IX delivers enough fuel to trap roughly 140 MPH and make 600 WHP with E85. We also recommend the STM Fuel Return Kit to aid this set up, available below.
2003-2006 Evolution VIII & IX.
STM-EVO89-450P |
|
|
EVOLUTION VIII-IX - FUEL RAILS
///
BACK TO TOP |
|
|
STM EVO 8/9 BLUE FUEL RAIL
The STM Blue Fuel Rail fits all the Evolution VIII & IX models and is available with your combination choice of -6AN and -8AN fittings. The rail and fittings are both anodized aluminum and safe for E85 and other corrosive fuels.
2003-2006 Evolution VIII & IX.
STM-EVO89-RAIL-BL |
|
STM EVO 8/9 BLACK FUEL RAIL
The STM Black Fuel Rail fits all the Evolution VIII & IX models and is available with your combination choice of -6AN and -8AN fittings. The rail and fittings are both anodized aluminum and safe for E85 and other corrosive fuels.
2003-2006 Evolution VIII & IX.
STM-EVO89-RAIL-BK |
|
AEM FUEL RAIL
AEM High Volume fuel rails feature a 1/2" fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line.
2003-2006 Evolution VIII & IX.
25-131BK |
|
AEROMOTIVE FUEL RAIL
This high flow, billet fuel rail is a direct replacement for the factory rail. Uses the factory feed line, regulator and return line. Features custom, removable, Aeromotive -8 AN ORB (O-ring Boss) to OEM adapters.
2003-2006 Evolution VIII & IX.
14132 |
|
FIC FUEL RAIL
FIC's Evo VIII-IX Fuel Rail include everything needed for use with Fuel Injector Clinic IS126-series injectors or factory injector style. Anodized sleek matte finish available in Black, Dark Blue, Dark Red or Silver.
2003-2006 Evolution VIII & IX.
RL EVO 8/9 |
|
HKS PURPLE FUEL RAIL
This is a direct bolt-on replacement of your factory fuel rail, and allows for larger injectors to be added. HKS Fuel Rails are machined out of aluminum and anodized HKS signature purple for durability and visual appeal.
2003-2006 Evolution VIII & IX.
14007-AM003 |
|
|
UNIVERSAL - FUEL PRESSURE REGULATORS
///
BACK TO TOP |
|
|
WELDON RACING -10AN/-8AN BYPASS FPR (FLUOROSILICONE)
The A2040 Weldon Racing Bypass Fuel Pressure Regulators have a with Fluorosilicone Diaphragm and are for use with fuel-injected applications running non-oxygenated fuels and available in two options: 30 to 110 psi base pressure or 90 to 200 psi base pressure. Fuel pressure increases on a 1:1 ratio with boost and features two -10AN pressure ports and one -8AN return port.
Universal Application.
A2040-281-A-120,A2040-281-A-200 |
|
WELDON RACING -10AN/-8AN BYPASS FPR (TEFLON)
The T2040 Weldon Racing Bypass Fuel Pressure Regulators with the upgraded Teflon Diaphragm are compatible with all fuels and for use with fuel-injected applications. Available in two options: 30 to 110 psi base pressure or 90 to 200 psi base pressure. Fuel pressure increases on a 1:1 ratio with boost and features two -10AN pressure ports and one -8AN return port.
Universal Application.
T2040-120,T2040-200 |
|
WELDON RACING -12AN BYPASS FPR (TEFLON)
The A2047 Weldon Racing Bypass Fuel Pressure Regulator with the upgraded Teflon Diaphragm is compatible with all known racing fuels and and is capable of flowing well over 10 GPM! Recommended for use with fuel-injected applications running 30 to 110 psi base pressure. Fuel pressure increases on a 1:1 ratio with boost and this FPR features three -12AN pressure ports.
Universal Application.
A2047-438-T-120 |
|
AEROMOTIVE PERFORMANCE EFI RED FPR
Aeromotive A1000-6 regulator is designed for medium to high horsepower applications. Features Aeromotive's high-flow design, superb pressure control and legendary durability. On the street and at the track, this pressure regulator has logged more miles, laps and passes than any other performance EFI regulator in the world!
Universal Application for -6AN Fittings.
13109 |
|
AEROMOTIVE PERFORMANCE EFI BLACK FPR
Aeromotive A1000 regulator is designed for medium to high horsepower applications. Features Aeromotive's high-flow design, superb pressure control and legendary durability. On the street and at the track, this pressure regulator has logged more miles, laps and passes than any other performance EFI regulator in the world!
Universal Application for -6AN Fittings.
13131 |
|
AEROMOTIVE EFI REGULATOR SERVICE KIT
The Aeromotive EFI Fuel Pressure Regulator Service Kit includes a new diaphragm to get your fuel pressure back to consistent levels. They are available for all Aeromotive fuel pressure regulators and install easily with no modifications.
Universal Application.
13001 |
|
FUELAB MINI FUEL PRESSURE REGULATORS
FUELAB Mini 535 Series 1:1 Fuel Pressure Regulators have all the same great features as our 515 series, only smaller and weigh 50% less. They accept port style and non-port style union fittings without interference. The 535 Series Fuel Pressure Regulator has a -6AN return port located on the bottom.
Universal Application.
53501 |
|
FUELAB STANDARD FUEL PRESSURE REGULATORS
FUELAB 515 Series Fuel Pressure Regulators are designed with performance and flexibility in mind. They accept port style and non-port style union fittings without interference. Available in 6 colors with -10AN or -6AN inlets, supporting fuel injected applications up to 90 PSI. Both the 515 Series Fuel Pressure Regulator have a -6AN return port located on the bottom.
Universal Application.
51501,51502 |
|
FUELAB REPLACEMENT HARDWARE KIT FOR "MINI" FPR
The FUELAB Replacement Hardware Kit for 535/545 Series "Mini" Fuel Pressure Regulators includes everything as pictured with stainless and brass hardware and O-ring seals
FUELAB 535/545 Series "Mini" FPR.
14503 |
|
FUELAB REPLACEMENT HARDWARE KIT FOR "STANDARD" FPR
The FUELAB Replacement Hardware Kit for 51502/51504/51506 "Standard" Fuel Pressure Regulators includes everything as pictured with stainless and brass hardware and O-ring seals.
FUELAB 51502/51504/51506 "Standard" FPR.
14502 |
|
FUELAB ELECTRONIC FUEL PRESSURE REGULATORS
The new FUELAB Electronic Fuel Pressure Regulator works directly with the Prodigy line of fuel pumps to reduce heat build up and vapor lock conditions related to street/strip operation. Set the pressure mechanically like a traditional bypass regulator, the let the electronic regulator's demand based speed control take care of the rest!
Universal Application.
52901,52902 |
|
FUELAB HIGH FLOW FUEL PRESSURE REGULATORS
Utilizing a massive 1/2" return orifice and -10AN ports, these regulators hold no bounds. With the bypass capability over 5 GPM at 5 PSI, this new regulator can handle blow through carbureted applications well over 1800 H.P., and for EFI applications using belt driven fuel pumps; even further (with a flattened regulation slope).
Universal Application.
56501,56504 |
|
STM 100 PSI FUEL PRESSURE GAUGE
The STM Fuel Pressure Gauges are silicone-filled for vibration dampening and sealed in a rugged, stainless steel case. Accurately reads fuel pressure from 0-100 psi and features 1/8" NPT center back connection to fit most regulators.
Universal Application.
STM-00100-GAUGE |
|
MARSHALL 0-100 PSI FUEL PSI GAUGE
Marshall shock-proof gauges have rugged construction and are liquid filled for vibration dampening.
Universal Application.
MS00100 |
|
|
EVOLUTION VIII-IX - FUEL FITTINGS
///
BACK TO TOP |
|
|
STM EVO 8/9 E85 BLACK ANODIZED -6AN FUEL RAIL FITTING
The STM E85 -6AN Fuel Rail Fittings are machined in Rochester, NY and anodized black for compatibility with E85, gas and all corrosive racing fuels. Includes the necessary o-ring, two stainless allen cap bolts and stainless lock washers to fasten to your fuel rail.
2003-2006 Evolution VIII-IX (For Inlet & Outlet)
STM-2G-FRF-6S |
|
STM EVO 8/9 E85 BLACK ANODIZED -8AN FUEL RAIL FITTING
The STM E85 -8AN Fuel Rail Fittings are machined in Rochester, NY and anodized black for compatibility with E85, gas and all corrosive racing fuels. Includes the necessary o-ring, two stainless allen cap bolts and stainless lock washers to fasten to your fuel rail.
2003-2006 Evolution VIII-IX (For Inlet & Outlet)
STM-2G-FRF-8S |
|
STM E85 -6AN O-RING BOSS TO 7MM BARB FITTING
The STM E85 -6AN O-Ring Boss to 7mm Barb Fitting is generally used on the bottom of fuel pressure regulators for the DSM & Evo 8/9. Safe for use with E85 and other corrosive fuels. USA-Made, machined in Rochester, NY and includes the necessary o-ring.
2003-2006 Evolution VIII-IX (FPR Bottom Return Fitting).
STM-6AN-7MM |
|
STM -6AN MALE TO 14MM X 1.5 FEMALE BUBBLE FLARE FITTING
The STM -6AN Male to 14mm x 1.5 Female Bubble Flare Fitting can be used on the Evolution VIII-IX fuel hardline and also fits the 90-99 DSM oil filter housings to convert to a -6AN.
Universal Application.
STM-FSC-614MMF |
|
STM -6AN BLACK ANODIZED E85 SAFE FUEL BULKHEAD FITTING
The STM -6AN Fuel Bulkhead Fitting is designed to attach to your fuel pump hanger by drilling out the old feed line. This is perfect for multiple-pump applications and features a 5/16 barb on one end and a -8AN on top. Simply sandwich your hanger between the fitting and washer/nut. The STM Bulkhead is anodized black to protect against corrosive fuels and is E85 safe.
Universal Application.
STM-BULKHEAD-6 |
|
TRS -8AN FUEL BULKHEAD FITTING
The Race Spot -8AN Fuel Bulkhead Fitting is designed to attach to your fuel pump hanger by drilling out the old feed line. This is perfect for multiple-pump applications and features a 5/16 barb on one end and a -8AN on top. Simply sandwich your hanger between the fitting and washer/nut. The TRS Bulkhead is anodized black to protect against corrosive fuels and is E85 safe.
Universal Application.
TRS-BULK-8 |
|
TRS FUEL DISTRIBUTION Y-BLOCK (3-PORT)
The Race Spot's Billet Aluminum 3-Port Y-Block is perfect for triple-pump setup's. It's fully anodized to protect against corrosive fuels and features a -10AN ORB port and three -8AN ports making it easy for you to switch to different sizes using ORB to Flare fittings. Two mounting holes and the low profile design make for an easy, custom mount.
Universal Application.
TRS-3Y |
|
TRS FUEL DISTRIBUTION Y-BLOCK (2-PORT)
The Race Spot's Billet Aluminum 2-Port Y-Block is fully anodized to protect against corrosive fuels and features a -10AN ORB port and two -8AN ports making it easy for you to switch to different sizes using ORB to Flare fittings. Two mounting holes and the low profile design make for an easy, custom mount.
Universal Application.
TRS-2Y |
|
|
EVOLUTION VIII-IX - FUEL FILTERS
///
BACK TO TOP |
|
|
WELDON FUEL FILTER WITH 10 MICRON SS FILTER (AFTER-PUMP)
The Weldon Billet Fuel Filters with 10 micron stainless steel elements are designed to be placed in line AFTER the fuel pump. These filters are available with -8AN or -10AN inlet and outlet ports.
Universal Application.
WEQ1010SSN,WEQ0810SSN |
|
WELDON FUEL FILTER WITH 100 MICRON SS FILTER (PRE-PUMP)
The Weldon Billet Fuel Filters with 100 micron stainless steel elements are designed to be a PRE-pump filter. These filters are available with -8AN, -10AN or -12AN inlet and outlet ports.
Universal Application.
WEQ08100SSN,WEQ10100SSN,WEQ12100SSN |
|
FUELAB 818 SERIES IN-LINE 3" FUEL FILTER
Fuelab 818 Series In-Line 3" Fuel Filters are available in your choice of color with -6AN, -8AN, -10AN or -12AN inlet/outlet. Includes the 10 micron / Paper Element (Cellulose) - The most economical and commonly used element. It is disposable yet provides excellent filtration.
Universal Application.
81801,81802,81803,81804 |
|
FUELAB 828 SERIES IN-LINE 5" LONG FUEL FILTER
Fuelab 828 Series In-Line 5" Long Fuel Filters are available in your choice of color with -6AN, -8AN, -10AN or -12AN inlet/outlet. Includes the 10 micron / Paper Element (Cellulose) - The most economical and commonly used element. It is disposable yet provides excellent filtration.
Universal Application.
82801,82802,82803,82804 |
|
FUELAB 3" SHORT REPLACEMENT FILTER ELEMENT
Fuelab replacement filter elements for the 3" 818 short filters. Paper, stainless and micro-fiberglass are available.
Universal Application.
71801,71802,71803,71804 |
|
FUELAB 5" LONG REPLACEMENT FILTER ELEMENT
Fuelab replacement filter elements for the 5" 828 long filters. Paper, stainless and micro-fiberglass are available.
Universal Application.
71805,71806,71807,71808 |
|
RUSSELL FUEL FILTERS
The Russell Competition fuel filters are offered in -6 and -8 male outlets, which help them flow up to 130 gph. Russell incorporated a disc-type element, which filters down to 40 microns and can be cleaned or replaced. Manufactured from billet aluminum with a polished aluminum, black anodized finish, the Russell Competition fuel filters make a great addition to your fuel system.
Universal Application.
650133,650103 |
|
AEM FLEX FUEL ETHANOL CONTENT SENSOR KITS
These AEM Kits measure a vehicle's fuel ethanol content percentage and temperature, which allows users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize an engine's tuning calibration for fuel ethanol content. This sensor is ideal for use with AEM's Infinity & Series 2 EMS. Available with 3/8" barb fittings or -6AN.
Universal Application.
30-2200,30-2201 |
|
ZEITRONIX ETHANOL CONTENT ANALYZER ECA-2 KIT
Ever wonder if that E85 you just filled up on is good? Now you can have that piece of mind before you decide to go WOT. The Zeitronix ECA-2 Ethanol Content Analyzer allows you to monitor your current Ethanol percentage and fuel temperature which can be used with ECU's, data logging and engine management systems.
Universal Application.
ZEI-ECA-2-KIT+E% |
|
E85 TESTER
Simply and accurately check the percentage of ethanol content in your E85 fuel. Simple to use, just add water to the lowest line and fill to the highest line with your fuel. Shake and let set for a few minutes. There will be a line of separation telling you what percentage your fuel really is. Yes its that easy.
Universal Application.
E85,TESTER |
|
RED LINE SI-1 COMPLETE FUEL SYSTEM CLEANER
Red Line SI-1 Complete Fuel System Cleaner cleans injectors, carburetors, valve and combustion chamber deposits with a concentrated blend of the most powerful high-temp and low-temp detergents available. Also use in smaller doses for maintenance as one bottle treats up to 100 gallons. Available in a 4oz or 15oz bottle.
Universal Application.
60101,60103 |
|
AMSOIL FUEL ADDITIVES
STM is an official AMSOIL dealer. We offer AMSOIL's full line of fuel additive, cleaning and booster products! As per AMSOIL regulations, please call to order AMSOIL products.
APICN,AQSCN,ASTCN,AOBBE,MOBCN |
|
|
EVOLUTION VIII-IX - OEM MITSUBISHI PARTS
///
BACK TO TOP |
|
|
OEM MITSUBISHI FUEL RAIL BOLT
Genuine OEM Mitsubishi Fuel Rail Bolt.
2003-2006 Evolution VIII & IX.
MF240059 |
|
OEM MITSUBISHI FUEL RAIL SPACER
Genuine OEM Mitsubishi Fuel Rail Spacer.
2003-2006 Evolution VIII & IX.
MD095402 |
|
OEM MITSUBISHI FUEL PRESSURE REGULATOR
Genuine OEM Mitsubishi Fuel Pressure Regulator fits all the Evolution VIII & IX models.
2003-2006 Evolution VIII & IX.
MD320749 |
|
MITSUBISHI PARTS
Take a look here to see even more OEM parts. STM has a MASSIVE stock of Mitsubishi parts on hand from tiny clips and gaskets to must-have JDM rears. If you can't find what you need, just give us a shout, if Mitsubishi still makes it, we can get it for you!
2003-2006 Mitsubishi Lancer Evolution VIII-IX.
MITSUBISHI |
|
