|
EVOLUTION X - VALVETRAIN
///
BACK TO TOP |
|
|
SUPERTECH EVO X DUAL VALVE SPRING KITS
The Supertech Dual Valve Spring Kits include 16 dual springs, 16 titanium retainers and valve seats. Designed and manufactured to reduce valvetrain harmonics, increase durability, and provide an increase in performance for your 4B11 engine.
2008-2015 Evolution X.
SPRK-M1012-EX1,SPRK-M1015-EX2,SPRK-M1015-EX3 |
|
KELFORD EVO X PACALOY VALVE SPRING SET
Kelford High Performance PACALOY Valve Spring Set for the 4B11 2008-2015 Evolution X.
2008-2015 Evolution X.
KVS11 |
|
MANLEY EVO X VALVE SPRINGS & RETAINERS
Manley Evo X valve springs are wound from super clean alloy with titanium retainers and valve locks.
2008-2015 Evolution X.
26195,22195-16,23195-16 |
|
TOMEI EVO X OVAL WIRE VALVE SPRINGS
This new valve spring is made from a high tensile, oval shaped wire rod. This was designed specifically for high engine speeds and axtreme conditions. Durable and reliable for prolonged peroids.
2008-2015 Evolution X.
163051 |
|
GSC POWER DIVISION EVO X VALVE SPRINGS & RETAINERS
GSC beehive springs use an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. Get the highest level of spring load retention while still maintaining good fatigue throughout the life of the spring.
2008-2015 Evolution X.
5042 |
|
BUSCHUR RACING EVO X DUAL VALVE SPRING & RETAINER KIT
Buschur Racing is pleased to have teamed up with Supertech to offer the same valve springs and titanium retainers that they have had produced for the Buschur Stage 3 cylinder heads. Kit includes 16 Dual Valves and Titanium Retainers.
2008-2015 Evolution X.
BR-EVOX-DVSRK |
|
SUPERTECH EVO X INTAKE & EXHAUST VALVES
Supertech intake and exhaust valves are sold individually. Black Nitride intake valves and Inconel exhaust valves are available.
2008-2015 Evolution X.
MIVN-1017,MIVN-1019,MEVI-1017,MEVI-1019 |
|
SUPERTECH EVO X 4B11 MAGANESE BRONZE VALVE GUIDES
The Supertech precision-machined, high quality Maganese Bronze Valve Guides used in combination with their low friction nitrided valves provide the best solution for performnace and durability for your 4B11 motor.
2008-2015 Evolution X.
GDE-MEVO,GDE-MEVOX-OS9 |
|
OEM MITSUBISHI EVO X VALVE STEM SEALS
OEM Mitsubishi Valve Stem Seals. Please note, the price is for one seal, so please check your quantity when ordering.
2008-2015 Evolution X.
MN183952 |
|
|
EVOLUTION X - CAMSHAFTS
///
BACK TO TOP |
|
|
KELFORD MECHANICAL CAMS
World leader in camshaft design and manufacture for high performance Japanese engine makes is set to release their new 4B11 camshafts. Utilizing ultramodern design principles, casting techniques and state of the art CNC grinding, these camshafts will again lead the way in Evo engine development.
2008-2015 Evolution X.
214-A,214-B,214-C |
|
TOMEI CAMSHAFTS | PONCAM | PROCAM
Tomei's Poncam 260/250 cams work with your stock valve springs, but the more aggressive Procam's will require an upgrade.
2008-2015 Evolution X.
143059,146C270115,146D270110,146C280115,146D280110 |
|
OEM MITSUBISHI EVO X CAMSHAFT BEARINGS
Genuine OEM Mitsubishi Camshaft Bearings. When you remove your old bearing, there will be a number on it. Replace it with the corresponding bearing number in the table above. These are sold individually, not in pairs.
2008-2015 Evolution X.
1016A030,1016A031,1016A032 |
|
OEM MITSUBISHI EVO X CYLINDER HEAD BOLT
Genuine OEM Mitsubishi Factory Replacement Cylinder Head Bolt for the 2008-2015 Mitsubishi Lancer Evolution X. 4 required for a full replacement.
2008-2015 Evolution X.
MN128938 |
|
OEM MITSUBISHI EVO X CYLINDER HEAD BOLT
Genuine OEM Mitsubishi Factory Replacement Cylinder Head Bolt for the 2008-2015 Mitsubishi Lancer Evolution X. 16 required for a full replacement.
2008-2015 Evolution X.
1005A900 |
|
ROYAL PURPLE MAX TUFF ASSEMBLY LUBRICANT
Royal Purple Max-Tuff Synthetic Assembly Lubricant is an ultra-tough, synthetic lubricant designed for engine builds and repairs, specifically crankshaft, camshaft and rod bearing assembly. Max-Tuff utilizes unique, synthetic molecules that adhere to metal surfaces to create a formidable, load-bearing physical barrier between surfaces.
2oz or 8oz Tube.
10553,01335 |
|
|
EVOLUTION X - BOLTS & FASTENERS
///
BACK TO TOP |
|
|
ARP 4B11 HEAD STUDS
All Pro Series ARP2000 studs are centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 220,000 psi. These fasteners deliver a 35% increase in tensile strength over the OEM torque-to-yield (TTY) head bolts.
2008-2015 Evolution X.
207-4206 |
|
ARP CUSTOM AGE 625+ HEAD STUDS
Includes a set of ten Custom Age 625+® head studs, ten parallel ground washers, ten 8740 chrome moly steel 12 pt nuts and a 1/2 oz. pack of ARP Lube. Centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 270,000 psi. Delivers a 55% increase in tensile strength over the OEM Torque to Yield (TTY) head bolts.
2008-2015 Evolution X.
207-4207 |
|
COSWORTH 4B11 HEAD STUDS
Cosworth Ultra High Performance Head Studs are manufactured from H11 tool steel with 260,000psi tensile strength and come complete with nuts and washers. Manufactured with hex broach end for ease of installation.
2008-2015 Evolution X.
20006025 |
|
ARP CAM TOWER STUD KIT
Camshaft positioning is critical on overhead cam engines and ARP makes sure that the cam towers are properly secured through use of these durable bolts and studs. They're made from 8740 chrome moly steel, with threads rolled after heat treat to ensure the optimum fatigue strength. Far superior to OEM fasteners.
2008-2015 Evolution X.
107-1001 |
|
ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT
ARP Ultra-Torque Fastener Assembly Lubricant gets you within 5% of the required pre-load on the first pull and stays consistent with each subsequent cycle-race prep, machining, pre-assembly and final assembly. Premium grade moly base with rust and corrosion inhibitors.
.5oz, 1.69oz, 10oz and 20oz packaging.
100-9908, 100-9909, 100-9910, 100-9911 |
|
|
EVOLUTION X - HEAD & VALVE COVER
///
BACK TO TOP |
|
|
AMS CNC CYLINDER HEAD
The AMS Evo X CNC Cylinder Head is the best performing and most developed design on the market. AMS has developed a CNC program that not only brings consistent performance and quality but also makes the most power of any head tested including the old design! Includes core charge for a new OEM head shipped to your door.
2008-2015 Evolution X.
AMS |
|
OEM MITSUBISHI ALUMINUM VALVE COVER
Genuine OEM Mitsubishi Aluminum Valve Cover and Gasket.
2008-2015 Evolution X.
1035A810 |
|
OEM MITSUBISHI VALVE COVER GASKET
Genuine OEM Mitsubishi Valve Cover Gasket.
2008-2015 Evolution X.
1035A583 |
|
OEM MITSUBISHI EVO X OIL FEEDER CONTROL VALVE
Genuine OEM Mitsubishi factory replacement Oil Feeder Control Valve is located in the rear side of the head and fits all 2008-2015 Evolution X models.
2008-2015 Evolution X.
1028A022 |
|
STM EVO X STAINLESS VALVE COVER BOLT KIT
The STM Evo X Stainless Valve Cover Bolt Kit is the perfect addition to add a clean, unique touch to your engine bay! Includes properly shouldered bolts for your valve cover, and replacement allen cap M6 socket bolts for your coils and harness. Fits all metal and plastic valve covers.
2008-2015 Evolution X.
STM-EVOX-SBK-VC |
|
STM EVO X -6AN AND -10AN VALVE COVER FITTINGS
Always looking for ways to make the engine bay cleaner, lighter and easier to work with, the STM Aluminum Valve Cover Fittings allow you to simply install -AN lines and fittings for a catchcan or breather right onto your valve cover.
2008-2015 Evolution X.
STM-VCF-EVOX-10F,STM-VCF-EVOX-6S |
|
OEM MITSUBISHI PCV VALVE
Genuine OEM Mitsubishi PCV Valve. Includes O-Ring as pictured.
2008-2015 Evolution X.
1035A422 |
|
OEM MITSUBISHI ENGINE OIL CAP GASKET
OEM Mitsubishi Engine Oil Cap Gasket.
2008-2015 Evolution X.
MD311638 |
|
MITSUBISHI PARTS
Take a look here to see even more OEM parts. If you can't find what you need, just give us a call anytime, and we can track down it for you!
2008-2015 Mitsubishi Lancer Evolution X 4B11.
MITSUBISHI |
|
