|
EVOLUTION X - ENGINE BLOCKS
///
BACK TO TOP |
|
|
AMS SLEEVED 4B11 CYLINDER BLOCK
The AMS Mitsubishi Lancer Evolution X / Ralliart Sleeved Cylinder Block is the perfect foundation for your high horsepower 4B11 build! Includes core charge for a new OEM 4B11 shipped to your door.
2008-2015 Evolution X.
AMS |
|
|
EVOLUTION X - CRANKSHAFTS
///
BACK TO TOP |
|
|
MANLEY BILLET 94MM STROKER CRANKSHAFT
The Manley Turbo Tuff Series Billet 94mm Stroker crankshaft for high horsepower and high boost applications now features a uniquely designed, ultra-lightweight, fully contoured counterweights resulting in reduced windage and maximum performance.
2008-2015 Evolution X.
190230B |
|
OEM MITSUBISHI CRANKSHAFT
Genuine OEM Mitsubishi Crankshaft.
2008-2015 Evolution X.
1100A139 |
|
|
EVOLUTION X - CONNECTING RODS
///
BACK TO TOP |
|
|
MANLEY TURBO TUFF "I" BEAM STEEL RODS
Forged from aircraft quality 4340 vacuum degassed material, the signature "Turbo Tuff" design combines the appropriate weight and rugged strength for ultimate horsepower applications. Available with 3/8" ARP 2000 or ARP 625+ cap screws.
2008-2015 Evolution X.
14409-4,14409R6-4 |
|
MANLEY 4B11 H-TUFF CONNECTING RODS
Manley H-Tuff connecting rods are manufactured from 4340 forgings and available with the 3/8" ARP 2000 and 3/8" ARP Custom Age 625+ cap screws.
2008-2015 Evolution X.
15029-4,15029R6-4 |
|
|
MANLEY ECONOMICAL "H" BEAM STEEL RODS
There is a vast difference in quality between a Manley "H" Beam and the "other" inexpensive H-Beams on the market. Weight matched to +/- 1.5 grams. Perfectly round big and small ends. Bend and twist is tightly controlled. Available with 3/8" ARP 2000 or ARP 625+ cap screws.
2008-2015 Evolution X.
14029-4,14029R6-4 |
|
EAGLE 4B11 H-BEAM RODS
Eagle ESP "H" Beam rods are multi-stage heat-treated, x-rayed, sonic tested, magnafluxed, 100 percent machined, and shot-peened to stress-relieve the metal and weighs much less than stock! 500hp rods at a great price!
2008-2015 Evolution X.
CRS5659M3D |
|
|
EVOLUTION X - PISTONS
///
BACK TO TOP |
|
|
MANLEY EVO X 86MM STANDARD STROKE (2.0L) PISTONS
Manley Platinum Series Lightweight Pistons designed for 86mm Standard Stroke (2.0L) for Mitsubishi Evo X 4B11 are available with the standard wrist pin or with the "Extreme Duty" 9310 alloy upgraded .210 wall pin.
2008-2015 Evolution X.
614000C,614000CE,614005C,614005CE |
|
MANLEY EVO X 94MM STROKER (2.2L) PISTONS
Manley Platinum Series Lightweight Pistons designed for 94mm Stroker (2.2L) for Mitsubishi Evo X 4B11 are available with the standard wrist pin or with the "Extreme Duty" 9310 alloy upgraded .210 wall pin.
2008-2015 Evolution X.
624000C,624000CE,624005C,624005CE |
|
MANLEY TOTAL SEAL PISTON RINGS
Manley Performance Products, Inc. proudly and exclusively offers Total Seal High Performance Piston Rings to compliment the Platinum Series Pistons. Total Seal is the leader in piston ring innovation and technology. Their quality control is unsurpassed. Total Seal rings have superior sealing and produce maximum horsepower.
2008-2015 Evolution X
46850-4,46855-4,46860-4,46865-4 |
|
CP/CARRILLO 4B11 EVO X 9.0:1 86.5MM PISTON SET
The CP/Carrillo Piston Set for the Evo X include 4 pistons, rings, wrist pins and pin clips with a 86.5mm bore size and 9.0:1 compression ratio.
2008-2015 Evolution X.
SC7221 |
|
BUSCHUR SPEC JE PISTONS
Buschur Racing Spec Evo X JE Pistons are NOT your standard off the shelf JE Piston. Buschur Racing worked very closely with JE in the development process allowing them to get everything done to their high specifications. Compression Ratio: Stock (9.0:1), available in: standard bore or .020 over.
2008-2015 Evolution X.
BUSCHUR,JE |
|
COSWORTH PISTONS 9.0:1
All Cosworth pistons are manufactured using the same methods as our Formula One pistons and include features such anti scuff skirt coating, ulta-strong pins, polished top and patented anti-detonation bands. Additionally, each application uses a unique forging to minimize weight and ensure the strongest possible piston design.
2008-2015 Evolution X.
20005129,20005130,20005131 |
|
JE PISTONS 9.0:1
JE designs are specifically engineered for extreme applications up to, and including, professional competition. In this environment, the higher compression ratios, highest boost or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. Complete set of 4 pistons, rings and pins.
2008-2015 Evolution X.
284800,284801 |
|
COSWORTH PISTON RINGS
High performance piston rings for a set of 4 Cosworth pistons.
Available Sizes: 86mm, 86.5mm, 87mm
20002246,20005705,20005706 |
|
JE REPLACEMENT PISTON RINGS
Top ring, second ring and oil ring are all included in a complete set for 4 pistons. Available for 4B11 86mm and 86.5mm pistons.
Available Sizes: 86mm & 86.5mm
JG1004-3386,JG1004-3405 |
|
WISECO PISTONS 9.0:1
Wiseco's forged piston and ring set for the 4b11 Evo X. Dedicated 2618 alloy forgings, offset wrist pins, Nitrided/Napier Steel rings, skirt coatings, complex dish and dome designs, special skirt profiles, and other features insure longevity and power with boosted and nitrous engines.
2008-2015 Evolution X.
K636M86,K636M865,K636M87,K636M88 |
|
WISECO XX REPLACEMENT PISTON RINGS
Wiseco's XX piston ring sets feature a stainless steel, gas-nitrided, barrel-faced top ring. They also contain an under hook style, cast iron, phosphate-coated, taper-faced second ring. Oil rings in the XX sets are 3-piece assemblies with gas-nitrided rails and a stainless steel, flex-vent spacer. Price is for ONE piston ring set.
Available Sizes: 86mm, 86.5mm, 87mm & 88mm
8600XX,8650XX,8700XX,8800XX |
|
|
EVOLUTION X - WATER PUMP, TIMING & PULLEYS
///
BACK TO TOP |
|
|
FLUIDAMPR CRANKSHAFT PULLEY
The Fluidampr Crankshaft Pulley Upgrade features a premium viscous style damper upgrade creates a long lasting foundation for durability and performance by protecting against a broad range of destructive crankshaft torsional vibrations.
2008-2015 Evolution X.
570701 |
|
OEM 4B11 METAL IDLER PULLEY
This is the OEM replacement for the "plastic death mechanism" that comes factory on your 4B11 motor. Upgrade to this metal pulley before your plastic one breaks!
2008-2015 Evolution X.
25287 2C000 |
|
OEM MITSUBISHI EVO X TIMING CHAIN
Genuine OEM Mitsubishi Factory Replacement Timing Chain fits all 2008-2015 Mitsubishi Lancer Evolution X models. Old part number was MN183891, Supersceeded to current 1140A073.
2008-2015 Evolution X.
1140A073 |
|
OEM MITSUBISHI EVO X OIL PUMP ASSEMBLY
The Genuine OEM Mitsubishi Oil Pump Assembly fits all 2008-2015 Evolution X models.
2008-2015 Evolution X.
1211A035 |
|
OEM MITSUBISHI EVO X ENGINE OIL DIPSTICK TUBE
The Genuine OEM Mitsubishi Evo X Engine Oil Dipstick Tube fits all the 2008-2015 Evolution X models.
2008-2015 Evolution X.
1255A172 |
|
|
EVOLUTION X - FASTENERS & FITTINGS
///
BACK TO TOP |
|
|
ARP 4B11 HEAD STUDS
All Pro Series ARP2000 studs are centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 220,000 psi. These fasteners deliver a 35% increase in tensile strength over the OEM torque-to-yield (TTY) head bolts.
2008-2015 Evolution X.
207-4206 |
|
ARP CUSTOM AGE 625+ HEAD STUDS
Includes a set of ten Custom Age 625+® head studs, ten parallel ground washers, ten 8740 chrome moly steel 12 pt nuts and a 1/2 oz. pack of ARP Lube. Centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 270,000 psi. Delivers a 55% increase in tensile strength over the OEM Torque to Yield (TTY) head bolts.
2008-2015 Evolution X.
207-4207 |
|
COSWORTH 4B11 HEAD STUDS
Cosworth Ultra High Performance Head Studs are manufactured from H11 tool steel with 260,000psi tensile strength and come complete with nuts and washers. Manufactured with hex broach end for ease of installation.
2008-2015 Evolution X.
20006025 |
|
ARP 4B11 MAIN STUDS
All Pro Series ARP2000 studs are centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 220,000 psi. These fasteners deliver a 50% increase in tensile strength over the OEM main bolts.
2008-2015 Evolution X.
207-5403 |
|
ARP 4B11 ROD BOLTS
No worries of stretched rod bolts! ARP's premium grade 8740 chrome moly steel rod bolts will keep your rods strong where it really counts.
2008-2015 Evolution X.
207-6002 |
|
MANLEY REPLACEMENT ROD BOLTS (ARP 2000 3/8")
Manley Replacement Rod Bolts. ARP 2000 3/8" Cap Screws. 1.600 Long. Sold in a set of 4 bolts.
Universal Application (Manley Rods).
42351-4 |
|
OEM MITSUBISHI OIL PAN DRAIN BOLT
OEM Mitsubishi Oil Pan Drain Bolt and Crush Washer.
2008-2015 Evolution X.
MD050316,MD050317 |
|
|
EVOLUTION X - BEARINGS
///
BACK TO TOP |
|
|
ACL 4B11 EVO X ROD BEARINGS
ACL's high quality rod bearings will prevent fatigue, failure, and reduce drivetrain stress through their durable and strong design.
2008-2015 Evolution X.
4B1236H-STD,4B1236H-.025,4B1236H-.25,4B1236HX-STD |
|
ACL 4B11 EVO X MAIN BEARINGS
ACL's main bearings are made of a softer metal so that you don't wear out your crank or engine block. Additionally, a thin layer of oil lubricates the connection between the bearings and the crank allowing the crank to "float" and reduce wear. Proper support via main bearings is crucial to prevent oscillations and wear that can damage the crankshaft and other components as the motor moves further out of balance.
2008-2015 Evolution X.
5M1237H-STD,5M1237H-.025,5M1237H-.25,5M1237HX-STD |
|
ACL 4B11 EVO X THRUST WASHER SET
ACL thrust washers are an often overlooked component of rebuilds. They prevent the crankshaft from moving around, thus keeping it in line with all of the other critical moving engine parts. It also helps the crankshaft to better stand up to stresses from clutch and flywheel operation.
2008-2015 Evolution X.
1T1237-STD |
|
COSWORTH EVO X 4B11 MAIN BEARING SET
Cosworth Race Main bearing sets feature a unique combination of design, metallurgy and engineering to deliver performance in extreme conditions. Cosworth Race bearings sets are available in three sizes to accommodate most applications.
2008-2015 Evolution X.
20007172,20007173,20007174 |
|
COSWORTH EVO X 4B11 ROD BEARING SET
Cosworth Race Rod bearing sets feature a unique combination of design, metallurgy and engineering to deliver performance in extreme conditions. Cosworth Race bearings sets are available in three sizes to accommodate most applications.
2008-2015 Evolution X.
20007175,20007176,20007177 |
|
COSWORTH EVO X 4B11 THRUST BEARING
Cosworth Thrust Bearings for the Evolution X 4B11.
2008-2015 Evolution X.
20007178 |
|
|
EVOLUTION X - OIL PAN
///
BACK TO TOP |
|
|
MOROSO EVO X 4B11 RACE BAFFLED BILLET ALUMINUM OIL PAN
The Moroso Race Baffled Billet Aluminum Oil Pan for the 4B11 Evo X features a race-proven, three door assembly and removable anti-slosh baffle that keeps oil contained in oil pump pickup area during road racing and drag racing and holds 1.5 more quarts than stock.
2008-2015 Evolution X.
20969 |
|
OEM MITSUBISHI EVO X ENGINE OIL PAN
Genuine OEM Mitsubishi Engine Oil Pan fits all the 2008-2015 Evolution X models. Factory mounting bolts are available in the purchase menu. The mounting bolts are sold individually as needed. 14 small bolts are required. 4 long.
2008-2015 Evolution X.
1200A394,MF140202,1050A763 |
|
|
EVOLUTION X - GASKETS & SEALS
///
BACK TO TOP |
|
|
ENGINE GASKET OVERHAUL KIT
Genuine OEM Mitsubishi Engine Gasket Kit fits all the 2008-2015 Evolution X models.
2008-2015 Evolution X.
1000B338 |
|
OEM MITSUBISHI HEAD GASKET
Genuine OEM Mitsubishi Head Gasket fits all the 2008-2015 Evolution X models.
2008-2015 Evolution X.
1005A966 |
|
COSWORTH 4B11 HEAD GASKETS
Engineered to seal in power under the most demanding conditions. Constructed from stainless steel with a folded stopper layer, each application features superior sealing compared to conventional multi layer steel gaskets and manufactured from pre-coated die cut stainless steel resulting in uniform coating distribution and consistent shape. 87mm gasket with optional 1.1 or 1.3mm thickness.
2008-2015 Evolution X.
20004122,20004123 |
|
MITSUBISHI PARTS
Take a look here to see even more OEM parts. If you can't find what you need, just give us a call anytime, and we can track down it for you!
2008-2015 Mitsubishi Lancer Evolution X 4B11.
MITSUBISHI |
|
