|
EVOLUTION VIII-IX - ENGINE BELTS
///
BACK TO TOP |
|
|
STM EVO 8 TIMING BELT REPLACEMENT KITS
The STM Timing Belt Replacement Kits are conveniently available for your Evo 8 in combinations of genuine OEM Mitsubishi parts, HKS purple, Gates Racing blue and the wallet-friendly Gates replacements. Available with or without the water pump and for engines with or without the balance shaft.
2003-2005 Evolution VIII.
STM-EVO8-TBRK |
|
STM EVO 9 TIMING BELT REPLACEMENT KITS
The STM Timing Belt Replacement Kits are conveniently available for your MIVEC Evo 9 in combinations of genuine OEM Mitsubishi parts, HKS purple, Gates Racing blue and the wallet-friendly Gates replacements. Available with or without the water pump and for engines with or without the balance shaft.
2006 Evolution MIVEC IX.
STM-EVO8-TBRK |
|
STM POWER STEERING DELETE KIT
The STM Power Steering Delete Kit includes everything you will need to remove the excess weight and bulk of your factory power steering. The replacement pulley allows you to bypass the stock power steering pump and remove the complete power steering system except for the steering rack. This kit is designed for drag cars, and not recommended for street use. Estimated weight savings is 11 pounds.
2003-2006 Evolution VIII & IX.
STM-EVO89-PSDK |
|
HKS PURPLE KEVLAR TIMING BELT
HKS's Fine Tune Kevlar Timing Belt features a full woven kevlar design that makes this belt 4 times stronger than stock... and it's purple.
2003-2006 Evolution VIII & IX.
24999-AM001 |
|
HKS PURPLE KEVLAR BALANCER BELT
HKS's Fine Tune Kevlar Balancer Belt features a full woven kevlar design that makes this belt 4 times stronger than stock... and it's purple.
2003-2006 Evolution VIII & IX.
24999-AM002 |
|
GREDDY EXTREME BLUE TIMING & BALANCER BELTS
Engineered to increase heat-resistance, flexibility and durability, GReddy Extreme Belts reduce the chances of cracking from heat, inconsistent timing from stretching and skipping or snapping. Improvements in materials and construction lead to a more reliable belt that will be more consistent and last longer.
2003-2006 Evolution VIII & IX.
13534500,13534501 |
|
COSWORTH KEVLAR TIMING BELT
300% stronger than OEM belts featuring high saturation HNBR elastomeric composites to ensure durability and heat resistance, durable nylon fiber provides extra wear resistance and increased tooth strength, while kevlar backing improves belt strength and bend flexibility.
2003-2006 Evolution VIII & IX.
20004950,20004952 |
|
GATES RACING TIMING BELT & BALANCE SHAFT
Constructed of HNBR elastomeric composites, this belt is 3x the strength and 3x the heat resistance of your OEM belt, and of course, it's a cool blue.
2003-2006 Evolution VIII & IX.
T167RB,T167RB1 |
|
GATES STANDARD TIMING BELT
Designed for the budget conscience customer who wants quality, but does not require the superior performance of the premium belt. Not intended for severe driving, high-performance or heavy duty applications.
2003-2006 Evolution VIII & IX.
T167 |
|
GATES ACCESSORY BELT
Gates Micro-V Belts outperform other V-ribbed belts because they are truncated. This shorter profile gives the new Micro-V Belts increased flexibility, reduced heat buildup and allows them to operate at extra high speeds on smaller diameter sheaves.
2003-2006 Evolution VIII & IX.
K060705 |
|
GATES A/C REMOVAL BELT
If you're ready to ditch the weight of your Air Conditioning system YOU WILL NEED this belt! OEM Firewall Plug is available in the drop-down menu.
2003-2006 Evolution VIII & IX.
K060569 |
|
OEM MITSUBISHI EVO 8/9 TIMING BELTS
Genuine OEM Mitsubishi Timing Belts. Do your engine a favor and buy the right belt!
2003-2005 Evolution VIII.
2006 Evolution IX MIVEC.
MD326059,1145A038 |
|
OEM MITSUBISHI EVO 8/9 BALANCE SHAFT BELT
Genuine OEM Mitsubishi 4G63 Balance Shaft Belt.
2003-2006 Evolution VIII & IX.
MR984778 |
|
OEM MITSUBISHI EVO 8/9 ALTERNATOR BELT
Genuine OEM Mitsubishi factory replacement alternator belt fits all the 2003-2006 Lancer Evolution VIII-IX.
2003-2006 Evolution VIII & IX.
MN158794 |
|
|
EVOLUTION VIII-IX - DRESS-UP ACCESSORIES
///
BACK TO TOP |
|
|
STM EVO 8/9 CAM POSITION SENSOR HOUSING COVERS
STM Cam Position Sensor Housing Covers are an easy, bolt-on piece to clean up your engine bay - Because every detail counts! Available for both Evo 8 and MIVEC 9.
2003-2006 Evolution VIII-IX.
STM-EVO89-EXHAUST,STM-EVO9-INTAKE |
|
STM TITANIUM REPLACEMENT METRIC BOLTS & WASHERS
(M6x1x20mm Bolts & M6 Flat Washers)
If you're looking for every advantage on the racetrack, let nothing be overlooked. One single bolt may not make a difference, but when you add up the weight of stainless vs titanium, it will blow your mind how much you can save with a handful of hardware.
Universal Application.
STM-TI-M6x1x20MM,STM-TI-M6-FLAT |
|
STM TITANIUM REPLACEMENT METRIC BOLTS & WASHERS
(M8x1.25x20mm Bolts & M8 Flat Washers)
If you're looking for every advantage on the racetrack, let nothing be overlooked. One single bolt may not make a difference, but when you add up the weight of stainless vs titanium, it will blow your mind how much you can save with a handful of hardware.
Universal Application.
STM-TI-M8x1.25x20MM,STM-TI-M8-FLAT |
|
STM CARBON FIBER FIREWALL BLOCK OFF PLATES
The STM Carbon Fiber Firewall Block Off Plates are the perfect addition to your racecar. We believe in form AND function. If you've removed your A/C, even in your street car, the larger piece pictured is a perfect fit and a flashier alternative to the standard, grey OEM piece. The smaller plate is for more serious builds with the heater core removed. Much better than leaving an empty hole in your firewall!
2003-2006 Evolution VIII & IX.
STM-EVO-CFBK-AC,STM-EVO-CFBK-HC |
|
STM EVO 8/9 POLISHED ALUMINUM ACD RESERVOIR
The STM ACD Reservoir for the 2003-2006 Evolution VIII-IX replaces the ugly, factory, plastic tank with this beautiful lightweight, aluminum piece with a mirror polished finish and includes a matte black STM cap and stainless hardware for a clean and simple install.
2003-2006 Evolution VIII & IX.
STM-EVO89-RES-ACD |
|
STM EVO 8/9 GLOSS BLACK ACD RESERVOIR
The STM ACD Reservoir for the 2003-2006 Evolution VIII-IX replaces the ugly, factory, plastic tank with this beautiful lightweight, aluminum piece with a durable, gloss black powdercoat finish and includes a matte black STM cap and stainless hardware for a clean and simple install.
2003-2006 Evolution VIII & IX.
STM-EVO89-RES-ACD-BK |
|
STM EVO 8/9 POLISHED ALUMINUM POWER STEERING RESERVOIR
The STM Power Steering Reservoir for the 2003-2006 Evolution VIII-IX replaces the factory unit with this beautiful, lightweight, polished aluminum piece. Includes matte black cap, stainless hardware, hose clamps and brass drain fitting for a clean and simple install.
2003-2006 Evolution VIII & IX.
STM-EVO89-RES-PS |
|
STM EVO 8/9 GLOSS BLACK POWER STEERING RESERVOIR
The STM Power Steering Reservoir for the 2003-2006 Evolution VIII-IX replaces the factory unit and features a durable, gloss black powdercoat finish. Includes matte black cap, stainless hardware, hose clamps and brass drain fitting for a clean and simple install.
2003-2006 Evolution VIII & IX.
STM-EVO89-RES-PS-BK |
|
STM EVO 8/9 POLISHED STOCK REPLACEMENT COOLANT RESERVOIR
The STM Coolant Overflow Reservoir is a direct replacement for the factory, plastic Evo 8/9 tank. Features a high-polished, lightweight, aluminum construction, handmade in-house at STM. Includes a black anodized cap, stainless allen bolts and washers, brass drain fitting and high-quality silicone hose for a clean and simple install.
2003-2006 Evolution VIII-IX.
STM-EVO89-STK-CRES |
|
STM EVO 8/9 BLACK STOCK REPLACEMENT COOLANT RESERVOIR
The STM Coolant Overflow Reservoir is a direct replacement for the factory, plastic Evo 8/9 tank. Features a lightweight, aluminum construction, handmade in-house at STM and finished with a durable, gloss black powder coat. Includes a black anodized cap, stainless allen bolts and washers, brass drain fitting and high-quality silicone hose for a clean and simple install.
2003-2006 Evolution VIII-IX.
STM-EVO89-STK-CRES-BK |
|
STM RELOCATED COOLANT OVERFLOW RESERVOIR (WITH FILL CAP)
The STM Coolant Overflow Reservoir with Fill Cap for the 2003-2006 Evo VIII-IX features a lightweight, aluminum construction, handmade in-house at STM and allows you to relocate the reservoir between the intercooler and radiator allowing you to completely remove your stock, plastic overflow from the engine bay. The welded bracket allows you to use existing bolt holes, so no drilling of the car is necessary. Includes brass fittings, stainless hardware and high-quality silicone hose and accessible fill cap for a clean and simple install.
2003-2006 Evolution VIII-IX.
STM-EVO-CRES-CAP |
|
STM RELOCATED COOLANT OVERFLOW RESERVOIR
The STM Coolant Overflow Reservoir for the 2003-2006 Evo VIII-IX features a lightweight, aluminum construction, handmade in-house at STM and allows you to relocate the reservoir between the intercooler and radiator allowing you to completely remove your stock, plastic overflow from the engine bay. The welded bracket allows you to use existing bolt holes, so no drilling of the car is necessary. Includes brass fittings, stainless hardware and high-quality silicone hose for a clean and simple install.
2003-2006 Evolution VIII & IX.
STM-EVO-CRES |
|
STM ALUMINUM BATTERY TIE DOWN PLATE
The STM Aluminum Battery Tie Down Plate is machined aluminum and available in the bead-tumbled look, or the satin black anodized finish as pictured. These are the same pieces included with some of the STM battery kits, but can be used on almost any application. The bolt holes are 7.5" apart and will accomodate most batteries. The aluminum piece can be easily polished, powercoated, anodized or painted.
2003-2006 Evolution VIII & IX.
STM-BTD-AL,STM-BTD-BL |
|
STM LIGHTWEIGHT RADIATOR BRACKETS
The STM Lightweight Radiator Brackets are a bare-bones alternative to our flashy, show-quality, radiator brackets. These are made of lightweight aluminum and anodized black.
Evolution VIII & IX.
STM-EVO89-LWRB |
|
STM RADIATOR BRACKETS (POLISHED ALUMINUM)
The STM radiator brackets are machined from aluminum, then polished to a mirror finish. We include two stainless steel alan cap bolts to finish the look. Price is for the pair of brackets, and new OEM rubber inserts are available as well, if needed.
Evolution VIII & IX.
STM-EVO-RBK-P |
|
STM RADIATOR BRACKETS (BLACK ANODIZE)
These are the same aluminum STM brackets featuring a smooth, black anodized finish. We include two stainless steel alan cap bolts to finish the look. Price is for the pair of brackets, and new OEM rubber inserts are available as well, if needed.
Evolution VIII & IX.
STM-EVO-RBK-BL |
|
STM RADIATOR BRACKETS (RAW ALUMINUM)
These are the same brackets as above, but absolutely RAW aluminum. No polishing, no scuffing, straight off the mill! These will save you a couple extra bucks if you want to polish them yourself, or you could scuff them for a brushed finish or even powdercoat!
Evolution VIII & IX.
STM-EVO-RBK |
|
STM EVO 8/9 STAINLESS VALVE COVER BOLT KIT
The STM Stainless Valve Cover Bolt Kit includes 26 stainless steel #5 allen cap bolts and stainless washers to dress up your engine bay and replace the worn, factory bolts. Fits all 2003-2006 Mitsubishi Lancer Evolution VIII-IX GSR, RS, SE, & MR models.
2003-2006 Evolution VIII & IX.
STM-EVO89-VCBK |
|
PROSPORT CARBON FIBER HOOD DAMPERS
The Prosport Carbon Fiber Hood Dampers are a complete kit which includes one pair of Black Carbon Fiber Hood dampers with stainless steel shafts and custom hardware. These are direct-fit, bolt-on dampers that allow you to ditch your hood prop or replace your boring stock dampers with real carbon fiber.
2003-2006 Evolution VIII & IX.
HD-MITS.EVO 7,8,9 |
|
ZAKLEE CLEAR CAM GEAR COVER (VIII)
Zaklee Corp Clear Cam Gear Cover. Now you can show off those sweet cam gears you just bought and keep an eye on your timing belt without leaving it uncovered.
2003-2005 Evolution VIII.
ZAKLEE |
|
ZAKLEE CLEAR CAM GEAR COVER (IX)
Zaklee Corp Clear Cam Gear Cover. Now you can show off those sweet cam gears you just bought and keep an eye on your timing belt without leaving it uncovered.
2006 Evolution IX MIVEC.
ZAKLEE |
|
APR CARBON FIBER TIMING BELT COVER
APR Performance Carbon Fiber Timing Belt Cover. Designed for the MIVEC Evo IX, but also fits all Evo VIII models. Dress-up your engine with carbon fiber, molded to precise dimensions that only pre-preg. materials can achieve. These parts are exotic-looking, race-inspired, and are unmatched in quality.
2003-2006 Evolution VIII & IX.
CBE-EVOCAM9 |
|
APR CARBON FIBER SPARK PLUG COVER
APR Performance Carbon Fiber Spark Plug Cover. Dress-up your engine with carbon fiber, molded to precise dimensions that only pre-preg. materials can achieve. These parts are exotic-looking, race-inspired, and are unmatched in quality.
2003-2006 Evolution VIII & IX.
CBE-EVOPLUG |
|
TOMEI STAINLESS STEEL SPARK PLUG COVER
The Tomei Evo 8/9 Spark Plug Cover is made of stainless steel with the pressed design: "Tomei The Engine Specialist." The Tomei plate features a raised design to allow your ignition coils to vent heat and help prevent failures that the coils can face from heat saturation.
2003-2006 Evolution VIII & IX.
191280 |
|
DRESS UP BOLTS
Take pride in your engine bay? It's time to take it to the next level with a Titanium Series Dress Up Kit for your engine bay and engine! These kits are a complete replacement for most visible bolts and nuts on your specific vehicle's engine bay, ready to bolt in as soon as they arrive.
2003-2006 Evolution VIII & IX.
MIT-001-TI,MIT-002-TI,MIT-005-TI,MIT-006-TI |
|
TOMEI FORGED PISTON TYPE OIL FILLER CAP
The Tomei Forged Piston Type Oil Filler Cap is CAD-designed and carved out of aluminum to resemble a forged piston. Finished with a show-room quality polish.
2003-2006 Evolution VIII & IX.
193065 |
|
APR CARBON FIBER RADIATOR COOLING PLATE
APR Performance Radiator Cooling Plates help to reduce under-hood temperatures. Formed in the autoclave at high temperatures, APR Performance Radiator Cooling Plates are made from pre-preg carbon fiber materials to be strong and light weight.
Evolution VIII & IX.
CF-483031 |
|
BUSCHUR RACING EXHAUST MANIFOLD HEATSHIELD
Buschur's new exhaust manifold cover fits over the stock Evo VIII-IX manifold or the Buschur Racing cast manifold. Polished to a mirror finish, this is a sweet piece to dres up your engine bay!
2003-2006 Evolution VIII & IX.
BUSCHUR,EVO,HEATSHIELD |
|
TOMEI EXPREME STAINLESS HEATSHIELD
The Tomei Expreme Heat Shield is made from high grade aircraft quality stainless steel SUS304. Designed for the stock manifold to keep the exhaust temps contained and keeps your bay looking fresh.
2003-2006 Evolution VIII & IX.
191247 |
|
MAP BRUSHED STAINLESS HEATSHIELD
Enhance the look of your engine bay with the MAP brushed stainless steel heat shield. Please note this will not work with aftermarket manifolds that are not provisioned for the factory heat shield.
2003-2006 Evolution VIII & IX.
MAP EVO-EMHS |
|
FORGE EXHAUST MANIFOLD HEATSHIELD
The Forge Motorsport Turbo Heatshield is a piece of art. Beauty with functionality.
2003-2006 Evolution VIII & IX.
2001-2002 JDM Evolution VI & VII.
FMEVOHS2,FMEVOHS1 |
|
|
EVOLUTION VIII-IX - CUSTOM TOOLS & PLATES
///
BACK TO TOP |
|
|
STM 4G63 TIMING BELT / CAM ALIGNMENT TOOL
The STM 4G63 Timing Belt / Cam Alignment Tool is unlike any other on the market. When we designed this tool, we did so with the DSM'ers in mind. The STM tool features a wide open center section so you can actually see through to the timing marks on your cam gears making it much easier to use. Works with all 4G63 DSM & Evolution models.
2003-2006 Evolution VIII & IX.
STM-4G63-TBTOOL |
|
STM ENGINE MANIFOLD BLOCK OFF PLATES
The STM Engine Manifold Block Off Plates are designed to completely seal off your intake or exhaust ports while you have the manifolds off. Whether you're building your motor or swapping out parts, this will keep dust and debris (not to mention creatures) out of the ports, and also makes your fresh build much more photogenic compared to bunched up paper towels.
2003-2006 Evolution VIII & IX.
STM-4G63-EXH-BKF,STM-EVO-INT-BKF |
|
WISECO TAPERED PISTON RING COMPRESSOR SLEEVES
Wiseco Tapered Piston Ring Compressor Sleeves. Machined from Wiseco sleeve forgings to offer the same toughness as Wiseco's forged pistons. Available in bore sizes ranging from 65.5mm - 104.00mm.
Universal Application.
RCS |
|
EUROEXPORT VALVE SEAL INSTALLATION TOOL
The EuroExport Valve Seal Installation Tools are made of PVC for increased lifetime and durability, and CNC machined for precision. This valve seal install tool makes it easy to evenly install the valve seals without damaging them in the process. Made in the USA!
Mitsubishi 4G63.
VSIT10003 |
|
EUROEXPORT VALVE SPRING COMPRESSOR TOOL (4G63)
The EuroExport Valve Spring Compressor Tool is CNC machined out of T6061 aluminum, anodized black, and laser engraved. Its smart design makes it easy to replace valve seals, valves, springs, and retainers. You can even use this tool with the head on the block.
Mitsubishi 4G63.
SC-40011 |
|
VALVE SPRING COMPRESSOR TOOL
Blue Point Universal Valve Spring Compressor Tool. Removes/installs the valve spring without removal of the cylinder head from the engine. Domestic and import servicing of single and double overhead cam engines, including Audi, Chrysler, Infiniti, Honda, Hyundai, Lexus, Mazda, Mitsubishi, Nissan, Porsche, Saturn, Toyota, Volvo, and Volkswagen.
Universal Application.
YA9140B |
|
AMS TIMING BELT TENSIONER TOOL (4G63)
These are 4140 cr-mo pre-hard material. They feature heat treated tips so they don't wear out after repeated use. A little anti-seize on the threads will prevent thread galling.
Mitsubishi 4G63.
AMS |
|
EUROEXPORT CAM GEAR LOCK/TIMING BELT TOOL (4G63)
Mitsubishi 4G63 Cam Gear Lock/Timing Belt Installation Tool. This precision tool makes the job of replacing or setting up your new Timing Belt as easy as 1,2,3. It's designed for Mitsubishi 4G63. Made from aluminum 6061 TC aircraft material anodize.
Mitsubishi 4G63.
TBI10002 |
|
AMS CAM GEAR ALIGNMENT TOOL (4G63)
The AMS 4g63 Cam Gear alignment tool was designed to lock your cam gears in place while performing a timing belt replacement. You'll no longer need to use zip ties, C-clamps or vice grips trying to keep everything in line.
Mitsubishi 4G63.
AMS |
|
AMS TORQUE/HONING PLATE (4G63 & 4G64)
The AMS 4G63 Torque/Honing Plate is an essential tool when machining your engine block. The controlled stresses of the cylinder head bolted to the block have become an important factor in the block's integrity. To ensure integrity, we must recreate that stress by using a deck plate when boring and honing to eliminate distortion of the cylinder bore.
Mitsubishi 4G63 & 4G64.
XXXXXX |
|
MITSUBISHI PARTS
Take a look here to see even more OEM parts. STM has a MASSIVE stock of Mitsubishi parts on hand from tiny clips and gaskets to must-have JDM rears. If you can't find what you need, just give us a shout, if Mitsubishi still makes it, we can get it for you!
2003-2006 Mitsubishi Lancer Evolution VIII-IX.
MITSUBISHI |
|
