 |
|
|
|
EVOLUTION VIII-IX - ENGINE OIL CATCHCAN
///
BACK TO TOP |
|
|
STM EVO 8/9 STANDARD ENGINE OIL CATCHCAN
The STM Standard Engine Oil Catch Can mounts easily to your factory intake manifold, not only allowing your engine to breathe, but aesthetically filling that empty gap in the engine bay and leaves plenty of room for the factory strut brace. Available in 3 finishes.
2003-2006 Evolution VIII & IX.
STM-EVO89-CC-STD |
|
STM EVO 8/9 SEALED ENGINE OIL CATCH CAN
The STM Sealed Engine Oil Catch Can for the 2003-2006 Evo 8/9 is designed to help keep vacuum on the crankcase at all times. By doing this, it will reduce the amount of oil that passes by turbo seals, and other seals, which is typically the cause of smoke from the exhaust. This will also help in the horsepower department.
Evolution VIII & IX (5-Speed)
Evolution VIII & IX (6-Speed)
STM-EVO-CC-SLD |
|
STM EVO 8/9 TRANSMISSION-MOUNT ENGINE OIL CATCH CAN
WITH 2-PORT VALVE COVER BREATHER
The STM 2-Port Valve Cover Breather design includes everything to properly route the can directly to the valve cover. We include both STM valve cover fittings for a clean and direct install, high quality swivel fittings and braided nylon hose. The can itself features 3 -6AN ports so if you need the additional third port and vent, it's ready to upgrade.
2003-2006 Evolution VIII & IX
STM-EVO89-CC-TM2 |
|
STM EVO 8/9 TRANSMISSION-MOUNT ENGINE OIL CATCH CAN
WITH 3-PORT VALVE COVER & ENGINE BLOCK BREATHER
The STM 3-Port Valve Cover & Engine Block Breather design includes everything to properly route the can to the valve cover as well as a vent directly to the crankcase. We include all high quality swivel fittings and braided nylon hose, both STM Valve Cover Fittings for a clean and direct install, and the Engine Block Fitting which is placed on the front side of the engine, behind the turbo.
2003-2006 Evolution VIII & IX.
STM-EVO89-CC-TM3 |
|
STM BFC RACE OIL CATCH CAN
The STM Evo 8/9 'BFC' Race Oil Catch Can, yes, the Big Fu*%in Can, is now available for those who are looking for a serious race set-up. This is designed for forward-facing or relocated turbo systems without intakes, as this catch can mounts right behind the driver side headlight.
2003-2006 Evolution VIII & IX.
STM-EVO-CC-BFC |
|
STM FIREWALL OIL CATCH CAN
The STM Firewall Oil Catch Can for the Evo 8/9 gives you more capacity than our standard can and mounts cleanly to the back of the firewall. Beautifully crafted, our USA-made catch cans are tig welded in-house at STM and we offer three finish options to accomodate your engine bay. Includes high quality -6AN fittings and lightweight Russell ProClassic line and available in two different configurations.
2003-2006 Evolution VIII & IX.
STM-EVO-CC-FW |
|
FATHOUSE FABRICATIONS OIL CATCH CAN
These catch cans are fabricated in-house at Fathouse Fabrication using only high-quality aluminum. Designed to fit snugly into the driver side engine bay in front of the wheel on a Mitsubishi Evolution but can be adapted into many vehicles.
2003-2006 Evolution VIII & IX.
FATHOUSE |
|
MISHIMOTO BAFFLED OIL CATCH CAN (UNIVERSAL)
The Mishimoto Universal Baffled Oil Catch Can is 100% billet, 6061 aluminum and accepts -AN fittings at the intlet, outlet, and drain area allowing over 27 possible configurations. The top cog mounting setup allows the can to be mounted from multiple angles. The drain plug can be removed to allow for -AN return to the oil pan. The can is also 100% washable and available with 5 different accent colors.
Universal Application.
MMBCC-UNI |
|
MISHIMOTO REPLACEMENT BRACKETS (UNIVERSAL)
Mishimoto Replacement Brackets for the Mishimoto Baffled Oil Catch Can above are offered in black, blue, red, green and purple to compliment any engine bay. These bracket sets are constructed from high quality anodized aluminum to provide a flawless finish suitable for your street, track or show car.
Universal Application.
MMBCC-BKTS |
|
MISHIMOTO CARBON FIBER OIL CATCH CAN (UNIVERSAL)
Mishimoto Universal Carbon Fiber Oil Catch Can measures a total of 3" x 6" and includes all necessary brackets and hardware for install.
Universal Application.
MMOCC-CF |
|
MISHIMOTO BLACK OIL CATCH CAN (UNIVERSAL)
Mishimoto Universal Black Oil Catch Can measures a total of 3.25" x 6" and includes all necessary brackets and hardware for install.
Universal Application.
MMOCC-RB |
|
VIBRANT 2-PORT CATCH CAN WITH RECESSED FILTER TOP
Features a unique recessed filter for recirculating top designs and a baffled interior to capture the maximum amount of oil. Includes two -10AN line fittings, stainless mounting bracket, bottom drain plug and a dipstick for easy fluid level checking.
Universal Application.
12694,12695 |
|
VIBRANT 4-PORT CATCH CAN WITH RECIRCULATING CLOSED LOOP TOP
Designed for vehicles with MAF sensors. Features a unique recessed filter for recirculating top designs and a baffled interior to capture the maximum amount of oil. Includes four -10AN line fittings, stainless mounting bracket, bottom drain plug and a dipstick for easy fluid level checking.
Universal Application.
12696,12697 |
|
|
EVOLUTION VIII-IX - RESERVOIRS & OVERFLOWS
///
BACK TO TOP |
|
|
STM EVO 8/9 POLISHED ALUMINUM ACD RESERVOIR
The STM ACD Reservoir for the 2003-2006 Evolution VIII-IX replaces the ugly, factory, plastic tank with this beautiful lightweight, aluminum piece with a mirror polished finish and includes a matte black STM cap and stainless hardware for a clean and simple install.
2003-2006 Evolution VIII & IX.
STM-EVO89-RES-ACD |
|
STM EVO 8/9 GLOSS BLACK ACD RESERVOIR
The STM ACD Reservoir for the 2003-2006 Evolution VIII-IX replaces the ugly, factory, plastic tank with this beautiful lightweight, aluminum piece with a durable, gloss black powdercoat finish and includes a matte black STM cap and stainless hardware for a clean and simple install.
2003-2006 Evolution VIII & IX.
STM-EVO89-RES-ACD-BK |
|
STM EVO 8/9 POLISHED ALUMINUM POWER STEERING RESERVOIR
The STM Power Steering Reservoir for the 2003-2006 Evolution VIII-IX replaces the factory unit with this beautiful, lightweight, polished aluminum piece. Includes matte black cap, stainless hardware, hose clamps and brass drain fitting for a clean and simple install.
2003-2006 Evolution VIII & IX.
STM-EVO89-RES-PS |
|
STM EVO 8/9 GLOSS BLACK POWER STEERING RESERVOIR
The STM Power Steering Reservoir for the 2003-2006 Evolution VIII-IX replaces the factory unit and features a durable, gloss black powdercoat finish. Includes matte black cap, stainless hardware, hose clamps and brass drain fitting for a clean and simple install.
2003-2006 Evolution VIII & IX.
STM-EVO89-RES-PS-BK |
|
STM EVO 8/9 POLISHED STOCK REPLACEMENT COOLANT RESERVOIR
The STM Coolant Overflow Reservoir is a direct replacement for the factory, plastic Evo 8/9 tank. Features a high-polished, lightweight, aluminum construction, handmade in-house at STM. Includes a black anodized cap, stainless allen bolts and washers, brass drain fitting and high-quality silicone hose for a clean and simple install.
2003-2006 Evolution VIII-IX.
STM-EVO89-STK-CRES |
|
STM EVO 8/9 BLACK STOCK REPLACEMENT COOLANT RESERVOIR
The STM Coolant Overflow Reservoir is a direct replacement for the factory, plastic Evo 8/9 tank. Features a lightweight, aluminum construction, handmade in-house at STM and finished with a durable, gloss black powder coat. Includes a black anodized cap, stainless allen bolts and washers, brass drain fitting and high-quality silicone hose for a clean and simple install.
2003-2006 Evolution VIII-IX.
STM-EVO89-STK-CRES-BK |
|
STM RELOCATED COOLANT OVERFLOW RESERVOIR (WITH FILL CAP)
The STM Coolant Overflow Reservoir with Fill Cap for the 2003-2006 Evo VIII-IX features a lightweight, aluminum construction, handmade in-house at STM and allows you to relocate the reservoir between the intercooler and radiator allowing you to completely remove your stock, plastic overflow from the engine bay. The welded bracket allows you to use existing bolt holes, so no drilling of the car is necessary. Includes brass fittings, stainless hardware and high-quality silicone hose and accessible fill cap for a clean and simple install.
2003-2006 Evolution VIII-IX.
STM-EVO-CRES-CAP |
|
STM RELOCATED COOLANT OVERFLOW RESERVOIR
The STM Coolant Overflow Reservoir for the 2003-2006 Evo VIII-IX features a lightweight, aluminum construction, handmade in-house at STM and allows you to relocate the reservoir between the intercooler and radiator allowing you to completely remove your stock, plastic overflow from the engine bay. The welded bracket allows you to use existing bolt holes, so no drilling of the car is necessary. Includes brass fittings, stainless hardware and high-quality silicone hose for a clean and simple install.
2003-2006 Evolution VIII & IX.
STM-EVO-CRES |
|
MISHIMOTO POWER STEERING RESERVOIR (UNIVERSAL)
The Mishimoto Aluminum Power Steering Reservoir Tank is offered as a universal fitment, comprehensive kit, complete with a mounting bracket, fittings, and hardware. Guaranteed to improve the aesthetics of your bay with its polished aluminum finish!
Universal Application.
MMRT-PSA |
|
|
EVOLUTION VIII-IX - BREATHERS & FITTINGS
///
BACK TO TOP |
|
|
STM EVO 8/9 VALVE COVER FITTINGS
Always looking for ways to make the engine bay cleaner, lighter and easier to work with, the STM Aluminum Valve Cover Fittings allow you to simply install -AN lines and fittings for a catchcan or breather right onto your valve cover.
2003-2006 Evolution VIII-IX.
STM-VCF-EVO89-DSM-6F,STM-VCF-EVO89-6R,STM-VCF-EVO89-10R |
|
BALANCE SHAFT INSPECTION HOLE BREATHER
STM Balance Shaft Inspection Hole Breather Fitting. Allows you to attach -6AN fitting to vent your engine block.
2003-2006 Evolution VIII & IX.
STM-BSB-670460 |
|
K&N BREATHER FILTERS
K&N's Crankcase Vent Filters are designed to clamp directly to metal or plastic tubing. Ideal for engines, transmissions, oil or gas tanks on racing vehicles. Available in a wide variety of sizes and applications. Please click the image for detailed photos.
Universal Application.
62-1410,62-1340,62-2470,62-1000 |
|
VIBRANT BREATHER FILTERS
Vibrant Performance Crankcase Breather Filter with Chrome Cap. Cotton Gauze Filter Element / Metal Base. Available in a wide variety of sizes and applications. Please click the image for detailed photos.
Universal Application.
2168,2166,2167,2164,2165 |
|
DIY & FABRICATION PARTS
If you're building a custom set-up, we have stock plenty of -AN swivel fittings and braided line. Click the image to see our full selection of Russell, Vibrant, Aeromotive, Aeroquip, TRS and STM Fittings & Line.
FAB |
|
MITSUBISHI PARTS
Take a look here to see even more OEM parts. STM has a MASSIVE stock of Mitsubishi parts on hand from tiny clips and gaskets to must-have JDM rears. If you can't find what you need, just give us a shout, if Mitsubishi still makes it, we can get it for you!
2003-2006 Mitsubishi Lancer Evolution VIII-IX.
MITSUBISHI |
|
|
|
