 |
|
|
|
SUBARU WRX & STi - AXLES
///
BACK TO TOP |
|
|
DRIVESHAFT SHOP 750HP LEVEL 5 FRONT AXLES
The Driveshaft Shop Level 5 750 HP Direct Fit Front Axles feature aerospace grade axle bars, billet male inner CV and a direct-fit outer CV that will fit the factory wheel hubs.
Subaru WRX & STi Models.
RA8521X5,RA8523X5,RA8533X5,RA8520L5,RA8522L5 |
|
DRIVESHAFT SHOP DIRECT FIT REAR AXLES
The Driveshaft Shop Direct Fit Rear Axles is similar to the Level 5 axle except the outer CV is made from Billet Chromoly and the internals are also made from the same high grade material, while using the original spline size to fit the stock hubs.
Subaru WRX & STi Models.
RA8528X4,RA8529X4,RA8530X4,RA8534X4,RA8536X4 |
|
DRIVESHAFT SHOP REAR AXLE & HUB KIT
The Driveshaft Shop Rear Axle & Hub Kit is a complete rear system including both axles, hubs and ARP extended studs. The axles feature aerospace grade torsional axle bars, and a billet ball & cage inner cv with our high grade inner differential spline, and a proprietary outer CV with a larger spline. The hubs are made to accomodate the larger spline and are also able to accept the factory ABS ring.
Subaru WRX & STi Models.
SU59,SU45,SU46,SB50,SU35 |
|
DRIVESHAFT SHOP 600HP AXLE BAR UPGRADE
The STi is a very stout car from the factory, the inner and outer CV's are made from a Japanese spec material very close to DSS's 4130 chromoly, but the center bars are made from a brittle lower grade material. The Driveshaft Shop Axle Bar Upgrade Kits feature a custom set of aerospace grade center bars that will fit your stock inner and outer CV rated to 600 HP. This kit comes with both axle bars, boots, clamps and grease.
Subaru WRX & STi Models.
SBR5,SBR2,SBF2,SBR1,SBF1 |
|
|
SUBARU WRX & STi - DRIVESHAFT
///
BACK TO TOP |
|
|
DRIVESHAFT SHOP CARBON FIBER DRIVESHAFT
The Driveshaft Shop 1-Piece Carbon Fiber Driveshaft for the Subaru WRX & STi is a complete 2.370" Carbon Fiber shaft that is approximately half the weight of the factory 2-piece driveshaft. Features larger, replaceable u-joints and can handle about 850WHP and 180 MPH. All of the factory shields, plates and covers can be used without any alteration to the car at all.
Subaru WRX & STi Models.
SUSH1-C,SUSH11-C,SUSH9-C,SUSH6-CF,SUSH2-C,SUSH4-C,SUSH8-C |
|
DRIVESHAFT SHOP ALUMINUM DRIVESHAFT
The Driveshaft Shop 1-Piece Aluminum Driveshaft is a complete 6061-T6 3" aluminum shaft that is approximately half the weight of the factory 2-piece driveshaft. The 1-piece aluminum shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP and 155 MPH.
Subaru WRX & STi Models.
SUSH1,SUSH9,SUSH6,SUSH2,SUSH7,SUSH4 |
|
DRIVESHAFT CARRIER BEARING SUPPORT BUSHINGS
Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with billet aluminum pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.T's. The mounts keeps the drive shaft Carrier bearing from moving under hard acceleration, stopping and turning giving you optimal performance 100% of the time.
Subaru WRX & STi Models.
TS-SU-DSB |
|
OEM DRIVESHAFT BOLT KIT (04-07 STI)
OEM Subaru Driveshaft Bolt Kit. STM has conveniently comprised this kit of OEM Subaru bolts to re-fasten your driveshaft to rear end.
Subaru WRX & STi Models.
901700144,032008000,021808006 |
|
|
SUBARU WRX & STi - DIFFERENTIALS
///
BACK TO TOP |
|
|
QUAIFE FRONT ATB HELICAL LSD DIFF (6-SPEED)
Quaife ATB Helical LSD differential for Subaru Impreza STi 6-speed front is a direct replacement for the standard Subaru differential to transform your car's performance. Unlike a conventional plate-style LSD, this relies on gears rather than clutch plates for a smoother operation.
2004-2016 Subaru STi 6-Speed.
QDH3Y |
|
SUBARU PARTS
Take a look here to see even more OEM parts. If you can't find what you need, just give us a call anytime, and we can track down it for you!
2002-2016 Subaru WRX & STi.
SUBARU |
|
|
|
