|
EVOLUTION X - CLUTCH LINES
///
BACK TO TOP |
|
|
STM EVO X CLUTCH LINE
The STM Evo X Clutch Line features a braided, stainless steel construction with a smooth, teflon coating to keep your engine bay free of scratches. This is a direct replacement for the squishy, factory rubber hose and will give you a smoother, stiffer pedal feel.
2008-2015 Evolution X.
STM-EVOX-CLUTCHLINE |
|
|
EVOLUTION X - INSTALL ACCESSORIES
///
BACK TO TOP |
|
|
STM CLUTCH FORK STOP
The STM Clutch Fork Stop is designed to stop the clip on your clutch from popping out due to hard shifting. It is an extremely common and irritating problem for anyone that has Multi-Plate clutch. Made from machined aluminum with a brushed finish and included two zinc-plated bolts for adjustability.
Evolution X.
STM-EVO-FORK |
|
ACT MONOLOC WEDGE COLLAR
Monoloc is a direct replacement and upgrade to the two-piece wedge collar in pull-type clutches. Its one-piece construction eliminates the collar snap ring from bending or popping out of place, which typically leads to clutch failure or severe pressure plate damage. NOTE: For Evo X, this only fits ACT or aftermarket plates with crimp type design. For OEM snap ring design, you need 884007P which is in development and will be released soon!
Evolution X.
884006P |
|
EXEDY WAVE LOCK RETAINING CLIP
If you need to buy this, then your life probably sucks right now! We feel your pain. This time around, be sure to install the STM Clutch Fork Stop!
Evolution X.
CP01 |
|
ACT CLUTCH ALIGNMENT TOOL
ACT clutch alignment tool.
Evolution X.
AT03 |
|
ARP FLYWHEEL BOLTS
Flywheel and Flexplate bolts play an important role in the performance and safety of race cars and street machines alike. That's why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. These Pro Series bolts were originally developed for NASCAR Winston Cup Competition and has a 200,000 psi rating.
Evolution X.
207-2801 |
|
FLYWHEEL BOLTS
Genuine OEM Mitsubishi Flywheel Bolts.
Evolution X.
1120A062 |
|
|
EVOLUTION X - MASTER CYLINDER
///
BACK TO TOP |
|
|
MAP CLUTCH MASTER CYLINDER UPGRADE
With this kit there is no need to remove the pedal assembly and cut the ball joint as a billet ball joint attachment is included. Additionally, pedal height is easily adjustable by breaking loose the jam nut, removing the clip, and threading the ball joint to your desired pedal height. A braided stainless steel line replaces the original line as well.
2008-2015 Evolution X.
EVOX-CMC-LHD |
|
AMS EVO X CLUTCH MASTER CYLINDER REINFORCEMENT RING
The AMS Performance Clutch Master Cylinder Reinforcement Ring strengthens the factory unit from splitting apart. It is known that the plastic master cylinder in the Evo X can break into two pieces under even regular driving conditions.
2008-2015 Evolution X.
A0221B-1A |
|
|
EVOLUTION X - RELEASE/THROW-OUT BEARINGS
///
BACK TO TOP |
|
|
ACT CLUTCH RELEASE BEARING
ACT Clutch Release Bearing / Throw Out Bearing.
2008-2015 Evolution X.
RB602 |
|
CCI EVO X TWIN/TRIPLE DISC THROW OUT BEARING
Competition Clutch replacement throw out bearing for the Evo X CCI Twin and Triple Disc Multiplate Clutch Kits 4-5153-C & 4T-5153-C. This is not compatible with stock clutches or the CCI Stage 2, 3, 4 or 5 kits.
2008-2015 Evolution X with CCI Twin/Triple Disc
TM5-5106-TBA |
|
QUARTER MASTER HYDRAULIC RELEASE BEARING
Quarter Master Hydraulic Release Bearings provide a solid pedal feel & consistent pedal actuation in street & race applications.
2008-2015 Evolution X.
710045 |
|
OEM MITSUBISHI CLUTCH RELEASE BEARING
OEM Mitsubishi Evo X Clutch Release Bearing / Throw Out Bearing.
2008-2015 Evolution X.
2317A001 |
|
|
EVOLUTION X - CLUTCH DISCS & REBUILD PARTS
///
BACK TO TOP |
|
|
CCI EVO X REPLACEMENT SINGLE-DISC CLUTCH PARTS
Competition Clutch Replacement Clutch Discs and Pressure Plate for the Evo 8/9 and Evo X Stage 2, 3, 4, and 5 CCI Single-Plate Clutch Kits. Not compatible with Multi-Plate Twin and Triple kits.
2008-2015 Evolution X.
381106-S,3-645 |
|
CCI EVO X TWIN-PLATE CLUTCH REBUILD PARTS
Replacement plates and discs for the Evolution X Competition Clutch Twin Disc clutch kits. Pressure Ring, Disc A, Floater Plate and Disc B are available individually as needed.
2008-2015 Evolution X with multi-plate Twin Clutch.
TM7-3,TM2-897-TSA,TM7-2,TM2-897-TSB |
|
CCI EVO X TRIPLE-PLATE CLUTCH REBUILD PARTS
Replacement plates, discs, flywheels and pressure plate for the Evolution X Competition Clutch Triple Disc clutch kits. Pressure Ring, Discs, Floater Plates, Flywheel and Pressure Plate are all available individually as needed.
2008-2015 Evolution X with multi-plate Triple Clutch.
TM7-1123,TM2-897-TSC,TM7-3,TM7-2,TM1-645-2B,TM1-645-1B |
|
QUARTER MASTER EVO X REPLACEMENT FLYWHEEL
FOR 8-LEG CLUTCH KITS
This is the replacement/rebuild flywheel for the Quarter Master Street & Race 8-Leg Clutch Kits for the Evolution X. This is not a stock-replacement flywheel.
2008-2015 Evolution X.
6200P2 |
|
EXEDY REPLACEMENT DISCS (TWIN HD)
Exedy replacement discs for the Twin Cerametallic HD (clutch # MM062HD). Purchase separately or as a full kit with both discs and the intermediate plate.
2008-2015 Evolution X.
DM09DA,DM09DB,IM01 |
|
TILTON 3-PLATE METALLIC DISC PACK
Tilton 7.25" 3-Plate Metallic Disc Pack Packs are renowned for their durability, torque capacity and heat capacity. These discs are suited, in name as well as function, for race applications due to their quick engagement characteristics. Replacement metallic disc pack for Evo X Tilton Clutch Kit (56-357).
2008-2015 Evolution X.
64185-2-ACC-30 |
|
TILTON 2-PLATE CERAMETALLIC DISC PACK
Tilton 7.25" 2-plate Cerametallic Clutch Disc Packs feature 4-paddle discs that utilize a unique blend of ceramic and metallic materials. Because the cerametallic discs are thicker than sintered metallic discs, they provide higher heat capacity through their increased mass. Replacement Cerametallic disc pack for Evo X Tilton Clutch Kit (56-356).
2008-2015 Evolution X.
64185-8-VW-30H |
|
ACT REPLACEMENT CLUTCH DISCS
All ACT Race Discs feature quicker shifting due to reduced weight, higher torque and heat capacity than organic discs with fade free characteristics, longer clutch life through ACT's careful selection of materials and features and SFI certification to insure safety.
2008-2015 Evolution X.
3000311,3000305,4240508,6240608,4240008,6240008 |
|
ACT REPLACEMENT PRESSURE PLATES (MONOLOC)
The ACT MB018 pressure plate uses an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency and features the Monoloc, a one-piece, direct upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches.
2008-2015 Evolution X.
MB018,MB018X |
|
MITSUBISHI PARTS
Take a look here to see even more OEM parts. If you can't find what you need, just give us a call anytime, and we can track down it for you!
2008-2015 Mitsubishi Lancer Evolution X 4B11.
MITSUBISHI |
|
