|
EVOLUTION VIII-IX - CLUTCH LINES
///
BACK TO TOP |
|
|
STM EVO 8/9 MASTER TO SLAVE CLUTCH LINE FOR QM HRB (5-SPEED)
The STM Master to Slave Clutch Line utilizes a stainless Goodridge line and the proper fitting attachment to the Quarter Master 5-speed Hydraulic Release Bearing (HRB) for a clean and simple install.
2003-2006 Evolution VIII & IX (5-Speed QM HRB).
STM-EVO89-MASTER-QMHRB |
|
STM EVO 8/9 STAINLESS CLUTCHLINE (MASTER TO SLAVE)
STM has teamed up with Goodridge to design the first, full master to slave cylinder, one-piece stainless clutchline. Includes everything pictured for a clean and simple install.
2003-2006 Evolution VIII & IX.
STM-EVO89-MASTER |
|
STM EVO 8/9 STAINLESS CLUTCHLINE (UPPER)
STM has teamed up with Goodridge to bring you our new Stainless Clutchline. Fits right between your factory hard line and master cylinder.
2003-2006 Evolution VIII & IX.
STM-EVO89-DSM-SLAVE |
|
STM EVO 8/9 STAINLESS CLUTCHLINE (LOWER)
STM has teamed up with Goodridge to bring you our Stainless Lower Clutchline for the Evo VIII-IX. This line replaces the lower OEM steel line that connects to the slave cylinder. Includes both fittings and features a 90° end for an easy install.
2003-2006 Evolution VIII & IX.
STM-EVO89-LCL |
|
STM EVO 8/9 -3AN QUARTER MASTER HRB CLUTCH LINE FITTING
If you've recently upgraded your Evo 8/9 to a Quarter Master Clutch with Hydraulic Release Bearing (HRB), this -3AN to -3AN Fitting is what you'll need to connect your STM Master to Slave Clutchline to your new Quarter Master HRB.
2003-2006 Evolution VIII & IX (with QM HRB).
10230 |
|
|
EVOLUTION VIII-IX - INSTALL ACCESSORIES
///
BACK TO TOP |
|
|
STM CLUTCH FORK STOP
The STM Clutch Fork Stop is designed to stop the clip on your clutch from popping out due to hard shifting. It is an extremely common and irritating problem for anyone that has Multi-Plate clutch. Made from machined aluminum with a brushed finish and included two zinc-plated bolts for adjustability.
Evolution VIII & IX.
STM-EVO-FORK |
|
STM INSTALL KIT FOR QM 5-SPEED HRB
The STM Install Kit for the Quarter Master 5-Speed Hydraulic Release Bearing (HRB) includes four stainless bolts and lock washers and the appropriate alignment tool for a clean, easy install. Available with or without the alignment tool.
Evolution VIII & IX.
STM-QM-HRB |
|
TILTON CLUTCH PEDAL STOP
For use with Tilton's Twin Plate Clutch Packages, this kit eliminates difficulties associated with setting a pedal stop and prevents clutch damage (over-stroking) that could result from using the factory pedal stop. The kit includes a fully machined base, which has been cut to a specified length and an adjustable thumbscrew with locking jam nut.
2002-2006 Evolution VIII & IX.
72-008 |
|
ACT MONOLOC WEDGE COLLAR
Monoloc is a direct replacement and upgrade to the two-piece wedge collar in pull-type clutches. Its one-piece construction eliminates the collar snap ring from bending or popping out of place, which typically leads to clutch failure or severe pressure plate damage.
Evolution VIII & IX.
884006P |
|
EXEDY WAVE LOCK RETAINING CLIP
If you need to buy this, then your life probably sucks right now! We feel your pain. This time around, be sure to install the STM Clutch Fork Stop!
Evolution VIII & IX.
CP01 |
|
EXEDY CLUTCH COVER BOLT SETS
Exedy Clutch Cover Bolt set for Mitsubishi Evo VIII-IX Exedy Single and Multiplate clutches.
Evolution VIII & IX.
BS03,BS05 |
|
ACT CLUTCH ALIGNMENT TOOL
ACT Clutch Alignment tool.
Evolution VIII & IX.
AT03 |
|
ARP FLYWHEEL BOLTS
ARP flywheel bolts feature an exclusive flat 12 point head design and a larger than stock underhead radius for increased strength. Each bolt is centerless ground to ensure the bearing surface is perpendicular to the threads creating equal load distribution.
Evolution VIII & IX.
107-2803 |
|
OEM MITSUBISHI FLYWHEEL BOLTS
Genuine OEM Mitsubishi Flywheel Bolts for the 2003-2006 Evo 8/9.
2003-2006 Evolution VIII & IX.
MD334117 |
|
|
EVOLUTION VIII-IX - RELEASE/THROW-OUT BEARINGS
///
BACK TO TOP |
|
|
ACT THROW OUT BEARING
ACT's Clutch Release Bearings are designed to withstand the forces that are produced by high performance clutches. Whether you're on the street or the strip, ACT's bearings will prove reliable, shift after shift.
2003-2006 Evolution VIII & IX.
RB601 |
|
CCI EVO 8/9 TWIN/TRIPLE DISC THROW OUT BEARING
Competition Clutch replacement throw out bearing for the Evo 7/8/9 CCI Twin and Triple Disc Multiplate Clutch Kits 4-5152-C & 4T-5152-C. This is not compatible with stock clutches or the CCI Stage 2, 3, 4 or 5 kits.
2003-2006 Evolution VIII & IX with CCI Twin/Triple Disc
TM5-5106-TBA |
|
EXEDY THROW OUT BEARING
Exedy Throw Out Bearing.
2003-2006 Evolution VIII & IX.
BRG601 |
|
OEM MITSUBISHI CLUTCH RELEASE BEARING
OEM Mitsubishi Clutch Release Bearing / Throw Out Bearing.
2003-2006 Evolution VIII & IX.
MR145619 |
|
QUARTER MASTER HYDRAULIC RELEASE BEARING
Quarter Master Hydraulic Release Bearings provide a solid pedal feel & consistent pedal actuation in street & race applications. These are different for 5 and 6-speed models. Both options are available.
2003-2006 Evolution VIII & IX (For 5-Speed or 6-Speed).
710045,740165 |
|
QUARTER MASTER EVO 8/9 5-SPEED HRB FEED LINE
The Quarter Master Replacement Hydraulic Supply Line for the 5-Speed Hydraulic Release Bearing works with all the 5-speed Evolution VIII & IX models.
2003-2006 Evolution VIII & IX (5-Speed Only).
730012 |
|
QUARTER MASTER EVO 8/9 5-SPEED HRB BLEEDER LINE
The Quarter Master Replacement Hydraulic Bleeder Line for the 5-Speed Hydraulic Release Bearing works with all the 5-speed Evolution VIII & IX models.
2003-2006 Evolution VIII & IX (5-Speed Only).
710016 |
|
OEM MITSUBISHI TRANSMISSION RETAINER
OEM Mitsubishi Transmisison Front Bearing Retainer. Bolts to the bell housing / throw out bearing.
2003-2006 Evolution VIII & IX.
MR980735 |
|
|
EVOLUTION VIII-IX - CLUTCH FORK
///
BACK TO TOP |
|
|
OEM MITSUBISHI EVO 8/9 CLUTCH RELEASE FORK
The Genuine OEM Mitsubishi Evo 8/9 Clutch Release Fork fits all the Evolution VIII & IX models, both 5-speed and 6-speed transmissions.
2003-2006 Evolution VIII & IX.
MD770376 |
|
CLUTCH RELEASE SPRINGS
Genuine OEM Mitsubishi Clutch Release Springs fit all the Evolution 8/9/X models. Sold individually.
2003-2006 Evolution VIII & IX.
MD749672,MD749673 |
|
OEM MITSUBISHI CLUTCH RELEASE FORK SHAFT SEALS
Genuine OEM Mitsubishi Clutch Release Fork Shaft Seals fit all the Evolution 8/9/X models. Sold individually.
2003-2006 Evolution VIII & IX.
MD749474 |
|
OEM MITSUBISHI CLUTCH FORK BUSHING
Genuine OEM Mitsubishi Clutch Fork Bushing fits all the Evolution VIII & IX models.
2003-2006 Evolution VIII & IX.
MR953913 |
|
OEM MITSUBISHI CLUTCH RELEASE FORK BOOT
OEM Mitsubishi Clutch Release Fork Boot.
2003-2006 Evolution VIII & IX.
MD747413 |
|
OEM MITSUBISHI CLUTCH RELEASE FORK SHAFT
OEM Mitsubishi Clutch Release Fork Shaft.
2003-2006 Evolution VIII & IX.
MR980758 |
|
|
EVOLUTION VIII-IX - MASTER & SLAVE CYLINDER
///
BACK TO TOP |
|
|
STM BRAKE BOOSTER DELETE PLATE
The STM Brake Booster Delete Plate is designed to bolt into your firewall and allow you to remove your factory brake booster. The master cylinder then bolts to this mounting plate, allowing you to save weight and space for racing applications. The plate finish is available as raw aluminum or anodized black.
2003-2006 Evolution VIII & IX.
STM-EVO89-BBDP |
|
OEM MITSUBISHI MASTER CYLINDER & PROPORTION VALVES (RS)
Genuine OEM Mitsubishi RS Brake Master Cylinder and Proportioning Valves.
2003-2006 Evolution VIII & IX RS.
MR977089,MR249607 |
|
OEM MITSUBISHI SLAVE CYLINDER
Genuine OEM Mitsubishi Slave Cylinder fits al Evo VIII & IX models.
2003-2006 Evolution VIII & IX.
MD748617 |
|
|
EVOLUTION VIII-IX - CLUTCH DISCS & REBUILD PARTS
///
BACK TO TOP |
|
|
CCI EVO 8/9 REPLACEMENT SINGLE-DISC CLUTCH PARTS
Competition Clutch Replacement Clutch Discs and Pressure Plate for the Evo 8/9 and Evo X Stage 2, 3, 4, and 5 CCI Single-Plate Clutch Kits. Not compatible with Multi-Plate Twin and Triple kits.
2003-2006 Evolution VIII & IX.
381106-S,3-645 |
|
CCI EVO 8/9 TWIN-PLATE CLUTCH REBUILD PARTS
Replacement plates and discs for the Evolution 8/9 Competition Clutch Twin Disc clutch kits. Pressure Ring, Disc A, Floater Plate and Disc B are available individually as needed.
2003-2006 Evolution VIII & IX with multi-plate Twin Clutch.
TM7-3,TM2-897-TSA,TM7-2,TM2-897-TSB |
|
CCI EVO 8/9 TRIPLE-PLATE CLUTCH REBUILD PARTS
Replacement plates, discs, flywheels and pressure plate for the Evolution 8/9 Competition Clutch Triple Disc clutch kits. Pressure Ring, Discs, Floater Plates, Flywheel and Pressure Plate are all available individually as needed.
2003-2006 Evolution VIII & IX with multi-plate Triple Clutch.
TM7-1123,TM2-897-TSC,TM7-3,TM7-2,TM1-645-2B,TM1-645-1B |
|
TILTON 3-PLATE METALLIC DISC PACK
Tilton 7.25" 3-Plate Metallic Disc Pack Packs are renowned for their durability, torque capacity and heat capacity. These discs are suited, in name as well as function, for race applications due to their quick engagement characteristics. Replacement metallic disc pack for Evo VIII-IX (56-358) Tilton Clutch Kit.
2003-2006 Evolution VIII & IX.
64185-2-ACC-30 |
|
TILTON 2-PLATE CERAMETALLIC DISC PACK
Tilton 7.25" 2-plate Cerametallic Clutch Disc Packs feature 4-paddle discs that utilize a unique blend of ceramic and metallic materials. Because the cerametallic discs are thicker than sintered metallic discs, they provide higher heat capacity through their increased mass. Replacement Cerametallic disc pack for Evo VIII-IX Tilton Clutch Kit (56-353).
2003-2006 Evolution VIII & IX.
64185-8-VW-30H |
|
ACT REPLACEMENT CLUTCH DISCS
All ACT Race Discs feature quicker shifting due to reduced weight, higher torque and heat capacity than organic discs with fade free characteristics, longer clutch life through ACT's careful selection of materials and features and SFI certification to insure safety.
2003-2006 Evolution VIII & IX.
3000311,3000305,4240508,6240608,4240008,6240008 |
|
ACT REPLACEMENT PRESSURE PLATES (MONOLOC)
The ACT MB018 pressure plate uses an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life and features the Monoloc, a one-piece, direct upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches.
2003-2006 Evolution VIII & IX.
MB018,MB018X |
|
EXEDY CLUTCH REPLACEMENT PARTS (TWIN)
Twin plate replacement parts for Exedy Twin Cerametallic Clutch Kits (MM022SD and MM022HD.)
2003-2006 Evolution VIII & IX.
DM13DA,DM13DB,CM06H,CM06S,PP02,IM01,FM12 |
|
EXEDY CLUTCH REPLACEMENT PARTS (TRIPLE)
Triple plate replacement parts for Exedy Triple Cerametallic Clutch Kits (MM023SR and MM023HD.)
2003-2006 Evolution VIII & IX.
DL03R,CM06H,CM06S,PP02,IM02,FM12,CH16 |
|
EXEDY CONVERSION KIT (TWIN TO TRIPLE)
Includes three plates and two discs along with the necessary splined hub. The pressure plate is the same part number between the twin and triple, but if you need a new one, the kit is available to include it as well.
2003-2006 Evolution VIII & IX.
DL03R,PP02,IM02,CH16 |
|
QUARTER MASTER PRESSURE PLATE (8-LEG)
Quarter Master Replacement Pressure Plate for 8-Leg Clutch Kits.
2003-2006 Evolution VIII & IX.
108707C |
|
QUARTER MASTER FLOATER PLATE (8-LEG)
Quarter Master Replacement Pressure Plate for 8-Leg Clutch Kits.
2003-2006 Evolution VIII & IX.
508707C |
|
QUARTER MASTER CLUTCH DISCS (8-LEG)
Quarter Master 8-Leg Street and Race Replacement Clutch Discs for the Evolution VIII-IX. Includes two discs.
2003-2006 Evolution VIII & IX.
266663RY,266663RY1 |
|
QUARTER MASTER V-DRIVE FLOATER PLATE (7.25")
Quarter Master replacement floater plate for 7.25" V-Drive racing clutch.
2003-2006 Evolution VIII & IX.
508506 |
|
QUARTER MASTER REPLACEMENT CLUTCH DISC (7.25")
Quarter Master Replacement Clutch Disc for 7.25" Clutch Kit.
2003-2006 Evolution VIII & IX.
226063RYS |
|
QUARTER MASTER V-DRIVE CLUTCH COVER (7.25")
Quarter Master 7.25 V-Drive Clutch Cover. Quarter Master offers all of the components that you need for servicing your clutch kit. These V-Drive cover plates are designed for use with your Quarter Master V-Drive clutches. All clutch components are subject to wear - keep your clutch working its best with Quarter Master!
2003-2006 Evolution VIII & IX.
308500 |
|
QUARTER MASTER FLYWHEELS FOR 8-LEG CLUTCH KITS
These flywheels are the replacement, rebuild parts for the Quarter Master 8-Leg Clutch Kits in the Evolution VIII-IX. This is not a stock-replacement flywheel.
2003-2006 Evolution VIII & IX.
6200P1,509544 |
|
MITSUBISHI PARTS
Take a look here to see even more OEM parts. STM has a MASSIVE stock of Mitsubishi parts on hand from tiny clips and gaskets to must-have JDM rears. If you can't find what you need, just give us a shout, if Mitsubishi still makes it, we can get it for you!
2003-2006 Mitsubishi Lancer Evolution VIII-IX.
MITSUBISHI |
|
