 |
|
|
|
EVOLUTION VIII-IX - WATER PUMPS
///
BACK TO TOP |
|
|
STM EVO 8/9 WATER PUMP BLOCK OFF PLATE
The STM Evo VIII-IX Water Pump Block Off Plate is made from 3/8" thick aluminum and is designed for racing applications allowing you to completely block off the water pump, or drill and tap a bung for your own custom set-up.
2003-2006 Evolution VIII & IX.
STM-EVO89-WPBO |
|
GATES WATER PUMP (EVO VIII)
Every Gates Water Pump is constructed with premium alloy materials and a 100% functional test of seals and bearings along with a 100% leakage test for both the casting and assembled water pump. Gates is committed to selling the highest quality new, never remanufactured, water pumps in the aftermarket.
2003-2005 Evolution VIII.
42577 |
|
OEM MITSUBISHI WATER PUMP, GASKET & ORING
Genuine OEM Mitsubishi water pump, o-ring and gasket.
Evolution VIII & IX Models.
1300A065,1300A067 |
|
STM WATER PUMP BOLT KIT
The STM Water Pump Bolt Kit is comprised of all OEM Mitsubishi bolts for a perfect install.
Evolution VIII & IX.
[OEM-EVO-WPBK]
MF140036,MF140022,MF140238,MF140026(x2) |
|
OEM MITSUBISHI WATER PUMP GASKET
OEM Mitsubishi Water Pump Gasket.
Evolution VIII & IX.
MN137262 |
|
OEM MITSUBISHI WATER PUMP PULLEY
Genuine OEM Mitsubishi Water Pump Pulley.
Evolution VIII & IX.
MN143303 |
|
OEM MITSUBISHI WATER PUMP PULLEY BOLT
OEM Mitsubishi Water Pump Pulley Bolt.
Evolution VIII & IX.
3200A119 |
|
|
EVOLUTION VIII-IX - WATER NECKS
///
BACK TO TOP |
|
|
STM EVO 8/9 WATER NECK FOR RELOCATED RADIATOR CAP
The STM Evo 8/9 Custom Water Necks feature a welded spout for the radiator cap and are designed for race applications where the radiator may be relocated or modified. The STM Water Necks are available for both Evo 8 and 9 models and are offered with or without the welded -12AN bung. The raised design brings the cap above the cylinder head to easily bleed out air in the system.
Evolution VIII & IX.
STM-EVO8-WNCAP,STM-EVO9-WNCAP |
|
STM EVO 8/9 WELDED WATER NECK WITH -AN OUTLET
The STM -AN Water Neck for the Evolution 8/9 allows you to run -AN fittings from your water neck to radiator. Often running large manifolds, the factory-style coolant hoses get in the way, so running an Evo 5 radiator or half-radiator can eliminate that problem, and this waterneck gives you the option of making your own coolant line. The STM -AN Water Neck is also available with a convenient 1/8" NPT bung welded right on top for a clean install with your water temperature sensor & gauge.
Evolution VIII & IX.
STM-EVO89-MD363251-WNAN |
|
STM EVO 8/9 FACTORY WATER NECK WITH NPT BUNG
The STM Evo 8/9 Factory Water Neck with NPT Bung starts with an OEM Mitsubishi piece, modified to accommodate a 1/8" NPT bung for a clean install with your water temperature sensor & gauge.
Evolution VIII & IX.
STM-EVO89-MD363251-NPT |
|
|
EVOLUTION VIII-IX - THERMOSTATS
///
BACK TO TOP |
|
|
MISHIMOTO RACING THERMOSTAT
Once the engine is fully warmed up the Mishimoto Racing Thermostat will open up at a lower temperature than standard thermostats, also allowing the coolant to flow through the engine sooner thus reducing and maintaining cooler engine temperatures.
Evolution VIII & IX.
MMTS-EVO-01 |
|
THERMOSTATS (VIII & IX)
Genuine OEM Mitsubishi Thermostats.
2003-2005 Evolution VIII.
2006 Evolution IX MIVEC.
MN143463,MD363571 |
|
|
UNIVERSAL - ELECTRIC WATER PUMPS
///
BACK TO TOP |
|
|
MEZIERE REMOTE ELECTRIC WATER PUMP (-12AN IN/OUT)
Meziere Remote Electric 20 GPM Inline Water Pumps are American-made and feature a single -12AN inlet and single -12AN oulet design. Suitable for street or drag strip use with a 2400+ hour life expectancy and a show-quality finish to last. The entire unit weighs only 5.2 pounds!
Universal Application.
WP136S |
|
MITSUBISHI PARTS
Take a look here to see even more OEM parts. STM has a MASSIVE stock of Mitsubishi parts on hand from tiny clips and gaskets to must-have JDM rears. If you can't find what you need, just give us a shout, if Mitsubishi still makes it, we can get it for you!
2003-2006 Mitsubishi Lancer Evolution VIII-IX.
MITSUBISHI |
|
|
|
