|
EVOLUTION X - CAMBER & TOE ADJUSTMENT
///
BACK TO TOP |
|
|
STM EVO X REAR CAMBER BOLT KIT
The STM Rear Camber Bolt Kit is comprised of all OEM Mitsubishi parts to adjust the rear camber of your Evo X.
2008-2015 Evolution X.
4117A018,MN184102,MU000763 |
|
HOTCHKIS EVO X ADJUSTABLE REAR END LINKS
Adjustable Heavy Duty Rear Links feature high quality 3-piece PTFE lined heim joints for smooth quiet operation, specially machined metric high articulation spacers, zinc coated grade-10.9 hardware and hard anodized CNC machined aluminum sleeve. An excellent upgrade for your Evo X with Hotchkis sway bars.
2008-2015 Evolution X.
25440R |
|
WHITELINE EVO X ADJUSTABLE REAR SWAY BAR END LINKS
Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
2008-2015 Evolution X.
KLC174 |
|
TORQUE SOLUTION EVO X ADJUSTABLE REAR CONTROL ARMS
Torque Solution Adjustable Rear Control Arms Kit is designed to correct the rear suspension geometry on your lowered Evo X. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. If you plan to track your car or get the full life of your tires these are a must have!!
2008-2015 Evolution X.
TS-EX-007 |
|
WHITELINE EVO X ADJUSTABLE REAR CONTROL ARM KIT
The Whiteline Adjustable Rear Control Arm Kit comes complete with 2 adjustable control arms fitted with zero compliance bearings designed to modify factory camber and track on the rear of the 2008-2015 Evolution X models. The result is greater range, more precise adjustment and a more direct connection between body and rear suspension delivering more predictable dynamic behavior.
2008-2015 Evolution X.
KTA135 |
|
AP EVO X REAR ADJUSTABLE CONTROL ARMS
Agency Power's fully adjustable lower control arms for the 2008 and up Mitsubishi Evo X replace the factory units on the left and right to give you more adjustability in camber, better steering response, reduced sprung weight, and improved rigidity. Available in 4 colors.
2008-2015 Evolution X.
AP-CZ4A-200 |
|
WHITELINE EVO X FRONT SWAY BAR LINK ASSEMBLY
The Whiteline Front Sway Bar Link Assembly utilizes a high tensile spring steel link fitted with ultra low compliance polyurethane bushes. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 20% more effective bar rate available at lower wheel deflection points.
2008-2015 Evolution X.
KLC139 |
|
WHITELINE EVO X ROLL CENTER/BUMP STEER CORRECTION KIT
Whiteline Roll Center / Bump Steer Correction Kit is designed to raise the front, roll-center geometry by using specially engineered ball-joints & tie rod ends while still maintaining original steering geometry. Front roll geometry actually encourages roll the lower you go.
2008-2015 Evolution X.
KCA395 |
|
WHITELINE EVO X SPARE DUST BOOT KIT
Whiteline Spare Dust Boot Kit for the 2003-2015 Evolution VIII-IX-X Bump Steer Correction Kit KCA395 above.
2008-2015 Evolution X.
W0903 |
|
WHITELINE EVO X ANTI-LIFT / CASTER CORRECTION KIT
The Whiteline Race-Only Anti-Lift / Caster Correction Kit features light weight aluminium bushings and offset serviceable bearings for added caster, minimal compliance and optimum feedback. Alloy bushings & spherical bearing (adds +0.5°)
2008-2015 Evolution X.
KCA400M |
|
|
EVOLUTION X - BARS & BRACING
///
BACK TO TOP |
|
|
STM EVO X LIGHTWEIGHT REAR BUMPER SUPPORT BAR
The STM Lightweight Rear Bumper Support Bar for Evo X weighs in at only 5.7 pounds is a direct replacement for the 33 pound, factory piece dropping over 27 pounds off your car! Finished with a durable, gloss black powder coat, and includes new mounting hardware for a clean and easy install.
2008-2015 Evolution X.
STM-EVOX-BSBR |
|
STM EVO X LIGHTWEIGHT FRONT CROSS MEMBER BRACE
The all new STM Lightweight Front Cross Member Brace for the Evolution X is handmade in the USA and weighs less than half the stock brace! Fabricated in-house from cromemoly and steel, then we finish the piece with a durable, gloss powdercoat. Bushings are pressed in and the factory bolts can be re-used for install.
2008-2015 Evolution X.
STM-EVOX-FCMB |
|
DC SPORTS EVO X CARBON STEEL FRONT STRUT BAR
DC Sports upper strut bars reduce a vehicle's chassis flex by connecting the vehicle body at the shock towers for added torsional stiffness. DC Sports strut bars vastly improve your car's road manners and handling characteristics, work with the factory suspension components, and are ideal for road race applications or spirited drivers with modified street vehicles.
2008-2015 Evolution X.
CSB1006 |
|
H&R EVO X SPORT SWAY BARS
H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. Increase your suspension's roll stiffness or its resistance to roll-in turns while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip.
2008-2015 Evolution X.
70009,71009 |
|
HOTCHKIS EVO X SPORT SWAY BAR SET
Hotchkis Sport sway bars give the driver the ability to rotate the car on corner entry and steer with the throttle when necessary. The dreaded under steer is eliminated and the handling becomes comfortably neutral with added traction during cornering. Finished in durable anthracite powder coat.
2008-2015 Evolution X.
22440 |
|
WHITELINE EVO X 27MM FRONT SWAY BAR
The Whiteline 27mm 3-point adjustable front sway bar allows its rate to be altered by increasing or reducing the length of the lever arms. This permits the roll stiffness to be tuned for different situations without replacing the entire bar. The stiffer the bar, the more force required to move the left and right wheels relative to each other. This increases the amount of force required to make the body roll.
2008-2015 Evolution X.
BMF55Z |
|
WHITELINE EVO X 27MM REAR SWAY BAR
The Whiteline 27mm 3-point adjustable rear sway bar allows its rate to be altered by increasing or reducing the length of the lever arms. This permits the roll stiffness to be tuned for different situations without replacing the entire bar. The stiffer the bar, the more force required to move the left and right wheels relative to each other. This increases the amount of force required to make the body roll.
2008-2015 Evolution X.
BMR84Z |
|
|
EVOLUTION X - BUSHINGS & MOUNTS
///
BACK TO TOP |
|
|
AMS EVO X CAM SIDE MOTOR MOUNT
Decrease transmission movement, resulting in more precise shifts and improved throttle response. This piece has a Durometer rating of 70A which will transmit less vibration through the cabin than other popular brands which use a harder polyurethane.
2008-2015 Evolution X.
AMS-04.03.0006-1 |
|
AMS EVO X TRANSMISSION SIDE MOTOR MOUNT
Decrease transmission movement, resulting in more precise shifts and improved throttle response. This piece has a Durometer rating of 70A which will transmit less vibration through the cabin than other popular brands which use a harder polyurethane. Or purchase the urethane bushing insert by itself and press them into your stock mounts.
2008-2015 Evolution X.
AMS-04.03.0007-1 |
|
AMS EVO X FRONT MOTOR MOUNT BUSHING INSERT
The AMS Evo X Polyurethane Front Motor Mount Insert will decrease transmission movement and result in more precise shifts and improved throttle response. This piece has a Durometer rating of 70A which will transmit less vibration through the cabin than other popular brands which use a harder polyurethane.
2008-2015 Evolution X.
XXXXXX |
|
WHITELINE EVO X FRONT CONTROL ARM
LOWER INNER FRONT BUSHING KIT
The Whiteline Front Control Arm Lower Inner Front Bushing Kit fits all the 2003-2015 Evolution VIII, IX & X models. Over compliant front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Whiteline's kit is specially designed to improve deflection rates for improved response and chassis control.
2008-2015 Evolution X.
W0593 |
|
MITSUBISHI PARTS
Take a look here to see even more OEM parts. If you can't find what you need, just give us a call anytime, and we can track down it for you!
2008-2015 Mitsubishi Lancer Evolution X 4B11.
MITSUBISHI |
|
