DSM
|
EVO
|
EVO X
|
3000GT
|
NISSAN
|
BMW
|
SUBARU
|
SUBARU TURBOS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
We offer many upgrade turbos on-line for your convenience, but please call us if you have ANY questions regarding your set up and what turbo is right for your car and your goals. We want more fast Subaru's's roaming the streets, just as much as you want to be the one driving them!
|
|
 |
|
|
FP RED | SUBARU WRX STI
The FP RED for Subaru STI/WRX features a large TD06 turbine wheel and is generally run in the larger 8cm turbine housing for max power. Internally gated turbos are now no extra charge! Click for more info.
|
|
|
|
|
FP 68 HTA TURBO WRX/STi
FP's newest turbo is the FP 68HTA Turbocharger, rebuilt from genuine MHI turbos, for the Subaru STi/WRX unit which out flows both the E316g and 18g wheels and allows for higher PR operation without increased compressor outlet temperatures like the existing 16g and 18g wheels. Click for more info.
|
|
|
|
|
FP 68HTA TURBO SUBARU LEGACY GT
Everyone has either seen or heard about the FP 68HTA Turbocharger for the Subaru STi/WRX for the 2.0 and 2.5 engines, our newest turbo is the FP 68HTA Turbocharger for the Subaru Legacy GT which allows for more simple fitment for Subaru Legacy cars! Click for more info.
|
|
|
|
|
FP HTA GT3582R BALL BEARING TURBO
The FP HTA GT3582R turbocharger is based on the world renowned Garrett GT Ball Bearing structure. FP has long recognized the precision and excellence in Garrett Ball bearings cartridges and turbos, and this is exactly why they choose Garrett over others manufacturers when they build the custom application HTA units. Click for more info.
|
|
|
|
|
FP HTA GT3586R BALL BEARING TURBO
This 62mm inlet / 86mm exducer HTA wheel extends mass flow well beyond 75 lb/min with observed power output in the 730+whp range on well prepared cars. This turbo is available with a variety of turbine housings, but using anything smaller than a .82 is just stupid. Click for more info.
|
|
|
|
|
FP HTA GT3076R BALL BEARING TURBO
The 76mm size HTA wheel has 54.8mm inducer and flows over 57lb/min without dropping efficiency, and works well at pressure ratios as high as 4.5:1.
There optional turbine housings for this turbo, but the recommended default housing is the .82 A/R or .63 A/R T31 style with it's compact 2.5" diameter 4 bolt outlet. Click for more info.
|
|
|
|
|
PTE 6466 CEA TURBO
The new, ball-bearing, PTE 6466 comes with the Port-Shrouded 4" cover, 2.5" outlet and is set up for an external gate.
|
|
|
|
|
PTE 6766 CEA TURBO
STM is now running the 6766 in the Ricer. So far we have topped the charts out at 846 HP on our Mustang dyno with 1/4 mile trap speeds of 167 mph...
|
|
|
|
|
PTE 6765 CEA TURBO
The 6765 can offer up 900 HP and has propelled 4g63's into the mid 8's. Available ball bearing or journal bearing, internal or externally gated. Click for more info.
|
|
|
|
|
PTE 6262 CEA TURBO
This turbo has proven over and over again its worth at the track, street or on the dyno making 700 HP and running consecutive 9 second passes... over and over again. Click for more info.
|
|
|
|
|
PTE 5557 CEA TURBO
Great mid-range turbo capable of 500+ streetable HP! Available ball bearing or journal bearing, internal or externally gated. Click for more info.
|
|
|
|
|
GARRETT GTX SERIES TURBOS
The new Garrett GTX series turbos feature a T04S Ported Shroud with 4" Inlet and 2" Oulet. Oil & water-cooled dual ball bearing system with forged, fully-machined compressor wheel featuring next-generation GTX aerodynamics. GTX3076R, GTX3071R and GTX3582R available.
|
|
|
|
|
GARRETT GT3582R BALL BEARING TURBO
This is one of our most popular turbos. Choose from the standard T3 4-Bolt outlet exhaust housing, lightweight TiAL Stainless Steel V-Band housing, or T3 3" V-Band. Standard compressor cover or a ported shroud is available. Oil & Water-cooled bearing system.
|
|
|
|
|
GARRETT GT4094R DUAL BALL BEARING TURBO
Yeah, it's pretty big! Garrett's latest Dual Ball Bearing turbo comes with T4 style inlet flange with 3" V-Band exit. Large style compressor housing with 4" inlet and 2.5"outlet. Good for up to 800HP with great top end power and best spool up for the power range.
Price: $1870.00
|
|
|
|
|
DEI TITANIUM TURBO SHIELD / BLANKET
Made from pulverized lava rock, these titanium turbo heat shields can withstand 1,800 degrees of direct heat, resulting in cooler underhood and air intake temperatures for improved performance and a boost in horsepower. Designed for T3 and T4 turbos. Purchase a full install kit or just the shield alone.
|
|
|
|
FP SUBARU TURBO GASKET SET
Set includes OEM turbine housing inlet and outlet gaskets, and oil drain tube gasket.
Price: $42.00
|
|
|
|
|
FP SUBARU STI OIL FEED LINE
This braided Stainless Steel oil feed line allows direct installation for any of FP's Mitsubishi based Subaru turbos to the STi. It has the unique fitting at the engine end to fit exactly like the stock oil line, and the proper fitting at the turbo end to match FP turbos. Since it's flexible, it easily routes around the wastegaste actuator with zero fuss.
Price: $80.00
|
|
|
|
|
FP SUBARU WRX OIL FEED LINE
This flexible oil supply line eases installation while increasing oil volume and pressure to the turbo for additional cooling and improved lubrication. It comes with 12mm banjo connection for the cylinder head and 10mm banjo for turbo end. Includes crush washers.
Price: $80.00
|
|
|
|
|
WRX/STI WATER PIPE KIT
Damaged or broken water lines on your Subaru turbo? This kit has all the pieces to get you back on the road. Not for use with stock Subaru turbos. Click for more info.
Price: $75.00
|
|
|
|
|
OEM WRX/STI TURBO OUTET STUD
Turbo outlet stud.
Price: $2.00
|
|
|
|
|
GOODRIDGE BANJO FITTING | M10
Goodridge single banjo adaptor made of plated steel. Use with oil or fuel.
Price: $8.00
|
|
|
|
GOODRIDGE BANJO BOLT | M10x1.25
Goodridge banjo bolts made of plated steel. Available in 2 sizes. Use with oil or fuel.
|
|
|
|
-10 AN OIL DRAIN FITTING "MITSU-SERIES"
These used to be called the standard "Mitsu-Series" for any Mitsubishi Flange (16g, 18g, 20g, etc.), but so many turbo companies are using these on whatever they want these days, it's hard to put a label on them anymore! So just check the dimensions before you buy. Click for detailed images.
Price: $25.00
|
|
|
|
-10 AN OIL DRAIN FITTING "GT-SERIES"
These used to be called the standard "GT-Series" for the Garrett, but so many turbo companies are using these on whatever they want these days, it's hard to put a label on them anymore! So just check the dimensions before you buy. Click for detailed images.
Price: $25.00
|
|
|
|
-10 AN OIL DRAIN FITTING "G-SERIES"
These used to be called the standard "G-Series" for any T3 Garrett, but so many turbo companies are using these on whatever they want these days, it's hard to put a label on them anymore! So just check the dimensions before you buy. Click for detailed images.
Price: $25.00
|
|
|
|
OIL RESTRICTOR FITTING
Dual Garrett Ball-Bearing Oil Restrictor Fitting.
Price: $19.00
|
|
|
|
OIL FEED LINE STRAIGHT END -4AN
Vibrant Performance Universal Oil Feed Kit includes a Teflon lined Stainless Steel flexible hose and high quality (straight-ended) -4AN fittings pre-installed.
|
|
|
|
OIL FEED LINE 90° END -4AN
Manufactured by Goodridge - number one line manufacturer for F1, Indy, and Grand Prix. These lines are certified for oil, fuel, and coolant and very resistive to the elements. Features one straight end and one 90° end in 18" or 28" lengths.
|
|
|
|
EARL'S -4AN INLINE OIL FILTER
You just spent all that money on a nice turbo... let's keep it clean. Check this every time you change your oil as well. -4AN filter with male inlets and outlets.
Price: $37.00
|
|
|
|
OEM COPPER CRUSH WASHERS
These are OEM Mitsubishi copper crush washers. Available in 14mm, 12mm and 10mm.
|
|
|
|
|
OIL OUTLET GASKET - GT SERIES
GT Series Oil Drain Gasket fits: GT25R, GT28R, GT28RS, GT30R and GT35R drain flanges.
Price: $4.00 Each
|
|
|
|
OIL OUTLET GASKET - T3/T4
T3/T4 Turbo Oil Drain Gasket.
Price: $4.00 Each
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |