DSM
|
EVO
|
EVO X
|
3000GT
|
GTR
|
BIKES
|
SUBARU
|
SUBARU TURBO ACCESSORIES
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
HALLMAN PRO BOOST CONTROLLERS
The Hallman Pro kit is our favorite. Simply turn the adjustment knob and it stays- No potential for overboosting. We also think these are the best looking kits available! These are what we run on all our STM cars holding strong and steady to 40+ psi!
|
|
|
|
HALLMAN COCKPIT CONTROLLER ADD-ON KIT
The Hallman Pro Cockpit Controller Add-on kit contains a cable system that will adapt to the Pro and Pro RX Hallman boost controller valves, allowing the user to control and adjust boost from inside the car. The cables are available in 48" or 72" in length. This kit does not contain a boost control valve.
|
|
|
|
HALLMAN BOOST CONTROLLER (ES)
The Hallman ES Boost Controller Kit contains a billet aluminum body that is anodized black, vacuum line and general installation instructions. The ES (Essentials) kit was designed for those looking for the best "bang for the buck" in boost control.
Price: $55.00
|
|
|
|
BUSCHUR RACING MANUAL BOOST CONTROLLER
Features a CNC machined billet aluminum body, ceramic ball bearing, stainless steel internal spring and anodized black. This manual boost controller also does not require a spring change to run low boost levels to high boost levels. It has been tested to be accurate from 16psi to 50+psi. Includes vacuum line and a T-Fitting.
Price: $105.00
|
|
|
|
PTE PW46 EXTERNAL WASTEGATE
Featuring a black anodized billet aluminum wastegate cap, and a Kevlar reinforced silicone diaphragm, these units can be used in any kit or setup that currently utilizes a V-band style 44mm gate. Includes all the necessary hardware (flanges, clamps, springs, etc), and can accommodate a wide range of boost pressures (anywhere from 1.5PSI up to 25.5PSI).
Price: $350.00
|
|
|
|
PTE PW39 EXTERNAL WASTEGATE
Featuring a black anodized billet aluminum wastegate cap, and a Kevlar reinforced silicone diaphragm, these units were designed to be a direct replacement for other existing 44mm wastegate flanges, but will work best with the flange provided. Includes all the necessary hardware (flanges, clamps, springs, etc), and can accommodate a wide range of boost pressures (anywhere from 1.5PSI up to 25.5PSI).
Price: $240.00
|
|
|
|
TiAL MV-S 38MM V-BAND WASTEGATE
The MV-S 38mm unit is much more compact than its F38 predecessor - standing only 3.7" in height. The V-Band flanges make installation pain free, the three lower & two upper air ports make connecting pressure sources and boost controllers easy! Available in all 5 TiAL colors. Click for more info.
|
|
|
|
|
TiAL MV-R 44MM V-BAND WASTEGATE
The MV-R 44mm wastegate is more compact than any current 44 or 46mm wastegate on the market. You get two top air ports and three bottom air ports for easy install. Available in all 5 TiAL colors. Click for more info.
|
|
|
|
|
TiAL QR BLOW OFF VALVE
The TiAL QR is a compact recirculating blow off valve. The reciruclation port uses the standard TiAL V-band flange and can be converted into a standard Q BOV by swapping the bottom piece. Available in all 5 TiAL colors and a matched 1" Subaru-style outlet. Price is for one valve. Click for more info.
|
|
|
|
TiAL Q BLOW OFF VALVE
Q is the first revision of the original TiAL BOV. The Q bolts up to any standard TiAL flange, no re-welding. This is the highest flowing BOV on the market. It's offered with a variety of springs for different vacuum levels. Available in all 5 TiAL colors. Price is for one valve. Click for more info.
| |
|
|
|
TIAL QR 34MM BOTTOM PORTION
TiAL Blow Off Valve "QR" Bottom Portion. If you're having idle issues venting to atmosphere, this bottom portion allows you to convert your "Q" to a "QR" with the recirculation fitting. 34mm Outlet (1.3" Mitsubishi Style). Must be the newer style TiAL. Does not fot the older style. Available in all 5 TiAL colors.
TL-QRB34 |
|
|
|
PERRIN UNIVERSAL BLOW OFF VAVE
The Perrin universal BOV is CNC machined from 6061 billet aluminum. This universal fitment has large 1.325" tube connections for easy installation. The adjustable cap design allows you to adjust the volume of air released.
ASM-INT-600RD,ASM-INT-600BK |
|
|
|
TURBO XS TYPE H RFL
It's Really F'n Loud! The RFL relieves compressor pressure surge caused by changing gears or backing off the throttle and is comfortable running up to 35 psi. Comes standard with both a mild steel and an aluminum weld-on adapter.
Price: $180.00
BOV-RFL |
|
|
|
HKS SUPER SQV4
HKS introduces the next model Super Sequential. Reliable functionality of the Super SQV 4 is unchanged and utilizes the same mounting flanges as all previous generation SSQVs. Purchase just the valve or vehicle-specific full install kits.
|
|
|
|
FORGE RECIRCULATING VALVE (STi)
Made from billet aluminium, this recirculating diverter valve dumps the charge-air back into the air intake system keeping external noise to a minimum. This increases both quicker throttle response and higher clamping load to maintain boost pressure more reliably. Fits 04-13 STI and 02-07 WRX.
Price: $185.00
FMDVSUB03 |
|
|
|
FORGE ATMOSPHERIC VALVE (STi)
Made from billet aluminium, this atmospheric diverter valve dumps the charge-air to atmosphere. This increases both quicker throttle response and higher clamping load to maintain boost pressure more reliably. Fits 04-13 STI and 02-07 WRX.
Price: $185.00
FMDVSUB01 |
|
|
|
FORGE RECIRCULATING VALVE (08-13 WRX)
Made from billet aluminium, this recirculating diverter valve dumps the charge-air back into the air intake system keeping external noise to a minimum. This increases both quicker throttle response and higher clamping load to maintain boost pressure more reliably. 08-13 WRX and 05-09 legacy 2.5GT.
Price: $185.00
FMWRX3 |
|
|
|
FORGE ATMOSPHERIC VALVE (08-13 WRX)
Made from billet aluminium, this atmospheric diverter valve dumps the charge-air to atmosphere. This increases both quicker throttle response and higher clamping load to maintain boost pressure more reliably. 08-13 WRX and 05-09 legacy 2.5GT.
Price: $185.00
FMDVECL201 |
|
|
|
EVO IX MR BLOW OFF VALVE
The OEM Evo IX MR aluminum valve is much stronger than the stock plastic ones and uses a stiffer spring.
Price: $160.00
|
|
|
|
|
1G DSM BLOW OFF VALVE
Probably the best OEM valve out there. Don't forget to add a gasket and flange if you need them.
Price: $130.00
|
|
|
|
|
TORQUE SOLUTION HKS BOV ADAPTER FLANGE
Torque Solution Billet HKS SSQV Blow Off Valve Adapter allows you to direct fit your blow off valve to your Subaru TMIC without any welding or modifications at all. Fits 2002-2007 WRX and 2004-2013 STi.
Price: $40.00
|
|
|
|
TURBO XS INSTALL KIT
Allows you to install the Turbo XS BOV-H or BOV-H-RFL on 2001+ WRX and STi.
Price: $55.00
|
|
|
|
FORGE STAINLESS WASTEGATE ACTUATORS
Forge Motorsport Adjustable Stainless Steel Wastegate Actuators will withstand the rigors of marine corrosion and simply will not tarnish with new piston design actuators with stainless steel bodies and external components/fixings.
FMAC1SUB,FMAC2SUB,FMAC3SUB
FMAC4SUB,FMAC5SUB,FMAC6SUB |
|
|
|
|
HKS TURBO TIMER TYPE-1
HKS's new sleek styling is great for a custom mounted location or small enough to be tucked out of the way. The Type-1 is a more spohisticated unit with abilities to display 1/4 mile times, speed, 0-60ft and much more. Click the image for all the details on the functions of this unit. You will need a harness, so check carefully for your application below.
|
|
|
|
|
HKS TURBO TIMER TYPE-0
HKS's new sleek styling is great for a custom mounted location or small enough to be tucked out of the way. The Type-0 is a more basic Timer than the Type-1 above and comes with the red light-up display. Click the image for all the details on the functions of this unit. You will need a harness, so check carefully for your application below.
|
|
|
|
|
APEXI TURBO TIMER
Apexi's Auto Timer is compact and clean in design, featuring a unique multi angle joystick button allowing easy navigation through the many feature menus.
Price: $120.00
405-A011 |
|
|
|
|
TURBO AND BOV FLANGES & GASKETS
Need the flange or gasket for that blow off valve? We have turbo gaskets, wastegate gaskets, block off flanges... Just click the image.
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | |