DSM
|
EVO
|
EVO X
|
3000GT
|
NISSAN
|
BMW
|
SUBARU
|
SUBARU SUSPENSION COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
THE BRAKE MAN FRONT DRAG KIT
Looking for the lighest, most bad-ass drag race kit out there? Here ya go. The Brake Man will stop your drag car from 300 mph runs. This kit is designed to bolt on to the 02-08 WRX and it will fit on the 02-07 STi with a little modification, allowing you to lighten up your rotating mass and run some serious slicks!
Price: $2400.00
|
|
|
|
|
THE BRAKE MAN REAR DRAG KIT
The Brake Man rear drag kit will fit the 02-07 WRX and with a little modification, the STi as well. Available with the option to keep your E-Brake (or to remove that "useless" weight!)
|
|
|
|
|
THE BRAKE MAN BRAKE PADS (FRONT)
The Brake Man Front Brake Pads are available for the OEM Brembos (Evo & STi), Willwood calipers and the F3 Tornado calipers in a variety of compounds from roadrace & autocross, drag racing applications and high performance street pads.
|
|
|
|
|
THE BRAKE MAN BRAKE PADS (REAR)
The Brake Man Rear Brake Pads are available for the OEM Brembos (Evo & STi), Willwood calipers and the F1 Tornado calipers in a variety of compounds from roadrace & autocross, drag racing applications and high performance street pads.
|
|
|
|
|
PROJECT MU NS STREET BRAKE PADS
Project Mu NS Street Pads are developed specifically for street use. Guaranteed to outperform OEM pads, Project Mu NS street pads are reliable in any weather or road conditions. NS street pads give outstanding initial stopping power that is of prime importance on the street. Made from an Asbestos-free brake compound, NS street pads also have very minimal dust and very low squeal properties.
|
|
|
|
|
STOP-TECH STREET BRAKE PADS
StopTech Street Performance brake Pads are engineered to meet the demands of high performance driving while maintaining the refinement and comfort expected in everyday driving conditions. StopTech brake pads combine the benefits of premium street brake pads with aggressive friction formulas suitable for light track day and autocross use.
|
|
|
|
|
GOODRIDGE PHANTOM BRAKE LINES
Goodridge Phantom Series G-Stop Brakeline Kits are constructed from black poly-coated stainless braided PTFE hoses with the highest grade stainless steel hose ends, banjos and bolts. Provides a more responsive and firm brake pedal by eliminating the "spongy" feel that often accompanies stock rubber brake lines. WRX & STi.
|
|
|
|
|
GOODRIDGE BRAKE LINES
Constructed from the finest quality hose and covered by braided stainless steel. In addition to providing a more responsive and firm brake pedal by eliminating the "spongy" feel that often accompanies stock rubber brake lines. Abrasion and corrosion resistant to stay good looking for a long time to come. WRX & STi.
|
|
|
|
|
STOP-TECH BRAKE LINES
StopTech stainless steel brake lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by reducing the expansion that is allowed by stock rubber flex lines. This provides a quicker pedal response and allows the driver to maintain consistent brake pressure and precision brake modulation. WRX & STi.
|
|
|
|
|
RUSSELL BRAKE LINES
Stainless steel braided hose with zinc-plated fittings, Russell Brake Line Kits increase braking performance and reduces brake pedal travel. Russell brake lines meet the strict guidelines of the D.O.T. MVSS-106 requirements. Each kit comes with all necessary hardware and fittings. 02-05 WRX & 04-07 STi.
|
|
|
|
KW VARIANT 3 COILOVERS
KW's new Variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by their engineers.
|
|
|
|
|
KW CLUBSPORT COILOVERS
KW Clubsport was developed for customers who demand a better handling car when participating in track day events, but also require an official road approval to use their car everyday. Independently adjustable in compression and rebound forces and include high performance racing springs. Racing top mounts are optionally available for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times. 2005+ STi.
35245814,35245716 |
|
|
|
|
D2 RS COILOVERS
Stainless steel braided hose with zinc-plated fittings, Russell Brake Line Kits Featuring a 36 way dampner and rebound adjustable monotube full coilover system. The setup has seperate height and preload adjustments allowing for optimal adjustment and allowing full strut travel at all times. Mounts are constructed of 6061 powder coated aluminum. Threads are teflon coated to prevent rust. Rebuildable and serviceable in the US. WRX & STi.
|
|
|
|
MEGAN RACING COILOVERS
If you're looking for a full ride adjustmment, Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street setup. The adjustment of the damper is as simple as can be with a built-in knob at the top of the damper mount for easy access. Price includes shipping! Click for more information.
|
|
|
|
|
TEIN MONO FLEX COILOVERS
Developed for entry-level competition motorsports and advanced street driving. Features include 16-way damping force adjustability, mono-tube internal design, pillowball upper mounts, and EDFC compatibility. Independent adjustments for ride-height and spring pre-load settings for increased suspension tuning.
|
|
|
|
|
TEIN TYPE FLEX COILOVERS
Developed for drivers seeking an aggressive coilover that can be used daily, and provide all the adjustments needed for circuit use. Compatible with the EDFC (Electronic Damping Force Controller) for added convenience and adjustability.
|
|
|
|
|
TEIN EDFC
The EDFC (Electronic Damping Force Controller) makes it possible for the driver to control the damping force at the touch of a button while in the drivers seat. Stepping motors installed on each shock absorber allow the driver to adjust the suspension to suit all road/track conditions.
|
|
|
|
|
TEIN SUPER STREET COILOVERS
Great for daily driving and occasion track use, whether it be at the drag strip, local circuit, or Auto-X course. Includes both ride height and damping force adjustment to allow the driver to dial in the suspension for various surface conditions.
|
|
|
|
|
TEIN BASIC COILOVERS
BASIC damper is a great option for consumers wanting a simple and quality made coilover. Each application is test fitted and road tested to ensure the best possible balance between comfort and performance on the street.
|
|
|
|
|
SWIFT REPLACEMENT COILOVER SPRINGS
While most track racers have already begun the ritual of swapping their springs, many swap from one brand to another, either softer or harder. What if a spring could change other dynamics, such as a noticeably lighter unsprung mass, smoother weight transfer, better ride quality, lower tire temperature, and increased ability to anticipate vehicle reaction? That's exactly what the Swift Metric Coilover Springs offer to you. Click for all opitons.
|
|
|
|
|
SWIFT SPORT SPRINGS
Swift Sport Springs keeps your quality, showroom ride height, and adds the lower, sporty feel for driving enthusiasts who demand only the best. Swift utilizes fewer coils in their design to create a much more responsive spring and create a faster reaction speed towards any road conditions. A lighter, un-sprung mass is another benefit of the Swift lowering springs design.
|
|
|
|
|
SWIFT SPRINGS SPEC-R
The Swift Spec-R Sport Springs are made for true track racing enthusiasts wanting to take their Evo to the next level. Spec R Springs are wound with the same engineering as the Swift Sport Springs, with the exception of stiffer rates and a slight change in ride height. 2004-2007 STi, 2008+ STi/WRX
|
|
|
|
|
EIBACH PRO LOWERING KITS
Just because you're driving a Rally car, doesn't mean it needs to look like a monster truck! These are well known and affordable springs that will give you an aggressive and streetable drop up to 1.3". Click for more information.
|
|
|
|
|
TEIN S.TECH SPRINGS
TEIN S.Tech Springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort.
|
|
|
|
|
TEIN H.TECH SPRINGS
High.Tech springs are designed for those seeking a slightly lowered stance while maintaining high ride quality at a reasonable price. Most vehicles will attain a 1.2 inch drop for a more attractive appearance, added performance, and excellent comfort.
|
|
|
|
|
SWIFT STABILIZER BARS
Swift Stabilizer bars come in a set with front and rear bars and specially designed bushings. Swift's unique material is able to be rigid and still provide enough flex for the bar to prevent lateral weight transfer which could cause tires to lose grip. Swift's sway bars offer the ideal stiffness that limits body roll without loosing traction from the tires during aggressive cornering.
|
|
|
|
|
NRG INNOVATIONS RACING LUG NUTS
NRG Innovations aluminum lug nuts M12 x 1.25. Made of super lightweight forged aluminum for strength and less weight. Knurled ends for easy hand tightening, narrowed head for easy installation onto wheel studs. Fits most aftermarket and performance wheels. Will not work with stock wheels. Price is for a set of 20.
|
|
|
|
FULL BLOWN LIGHTWEIGHT ALUMINUM LUG NUTS
Full Blown's super light weight nuts are forged from durable 7075 aluminum alloy and anodized for corrosion resistance! Sold as a set of 20. M12 x 1.25 for Subaru applications.
|
|
|
|
CNC STAGING BRAKE
CNC Series 412 Staging Brake features total-seal rubber boots and a straight, chrome handle. Does not affect or hinder foot brakes. Comes equipped with fittings for either standard American 3/16" inverted flare brake line or 10mm metric thread-bubble flare brake line.
Price: $176.00
|
|
|
|
MOTUL RBF 600 BRAKE FLUID
100% synthetic fluid for hydraulic-actuated brake and clutch systems. Specifically designed to resist the high temperatures of actuated (steel or carbon) racing brakes and clutch systems.
Price: $20.00
|
|
|
|
|
ATE SUPERBLUE BRAKE FLUID
High performance Brake Fluid ideal for road racing, autocross, and high performance driving. Exceeds all DOT 4 requirements. Dry boiling point 536° F, wet boiling point 396° F. This fluid is NOT SILICONE and is compatible with conventional brake fluid.
Price: $21.00
|
|
|
|
|
GIRODISC CALIPER PISTON SPREADER
Made from steel and powder coated for durability. The slider is cadmium plated. The pivot bushings are all made from nylon and will ensure smooth action. This tool will quickly become invaluable to any team, shop, or enthusiast who changes pads and rotors with any frequency.
Price: $225.00
|
|
|
|
|
SIMPSON RACING SKYJACKER PARACHUTE
These Simpson Skyjacker reinforced nylon parachutes utilize a handmade crossform design that's reliable and durable up to 200 mph. They have a 10 ft. plume, which extends 12 ft. from the car and uses a 12" pilot chute and compression launch spring. The 0.090" alloy mounting plate allows for bolt-on installation, and they include a Nomex chute pack and backing.
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |