DSM
|
EVO
|
EVO X
|
3000GT
|
GTR
|
BIKES
|
SUBARU
|
SUBARU EXHAUST COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
STM ALUMINUM CAT-BACK EXHAUST
The STM Aluminum Cat-Back Exhaust for 2002-2007 Subaru WRX & STi is insanely lightweight at only 9 pounds!! The entire exhaust is fully 3" aluminum, tig welded in house utilizing the STM Aluminum Flanges and Vibrant Aluminum Race Muffler. All gaskets and hardware are included as well. Click for more info and installed photos. 2002-2007 WRX & STi.
Price: $700.00
|
|
|
|
GRIMMSPEED CATLESS DIVORCED DOWNPIPE
You are looking at a top-of-the-line fully USA built Downpipe. All materials, engineering, R&D, fabrication, etc are straight out of the USA. The tubing is CNC Mandrel Bent 304 Stainless Steel using custom made bend dies to give you the best fit and performance possible. 2002-2007 WRX & STi.
Price: $440.00
007001 |
|
|
|
GRIMMSPEED UP PIPE W/ EWG VBAND DUMP
GrimmSpeed Up Pipe w/ External Wastegate V-Band Dump Tube. The GrimmSpeed EWG Up-Pipe Kit fits more downpipes than any other EWG Up-Pipe on the market. Even fits large TurboXS 4" Bellmouth Downpipe. Features a larger than stock diameter internal wastegate, allowing the exhaust gas to be released faster, which improves boost control and maintains maximum boost longer in the rpm range. All of these together will give you a 10-40 HP INCREASE! WRX & STi.
EWG-013001,EWG-059001 |
|
|
|
GRIMMSPEED UP PIPE
Adding an aftermarket Up Pipe is one of the first things you should do to your Subaru. Arguably one of the best $/HP ratios. Grimmspeed's goal was to make a premium heavy duty Up Pipe for you. Up Pipes run in very harsh conditions when bolted to your car so it is important to use high quality components otherwise you risk fatigue. WRX & STi.
Price: $199.00
003001 |
|
|
|
GRIMMSPEED HIFLOW CROSSPIECE
GrimmSpeed HiFlow Exhaust Manifold Crosspipe. 50% of your exhaust gasses are passing through your tiny, factory pipe and, well, that's just a problem. Crosspipes run in very harsh conditions when bolted to your car so it is important to use high quality components otherwise you risk fatigue. Do not worry though, GrimmSpeed has a solution for you! Fits 02-05 WRX, 08-13 WRX, 04-13 STi.
Price: $195.00
001001 |
|
|
|
GRIMMSPEED HIFLOW CROSSPIECE (06-07 WRX)
GrimmSpeed HiFlow Exhaust Manifold Crosspipe. 50% of your exhaust gasses are passing through your tiny, factory pipe and, well, that's just a problem. Crosspipes run in very harsh conditions when bolted to your car so it is important to use high quality components otherwise you risk fatigue. Do not worry though, GrimmSpeed has a solution for you! 06-07 WRX.
Price: $195.00
002001 |
|
|
|
INVIDIA DOWNPIPE WITH CAT
Invidia's down pipes are full stainless steel for a great finish and long lasting durability, CNC machined flanges and robot TIG welding complete this incredible design. Less restriction translates into faster turbo spool, giving you an edge over the competition. Fits 02-07 WRX/STi.
Price: $490.00
HS05SW1DPC |
|
|
|
|
INVIDIA DOWNPIPE NO CAT UNPOLISHED
This pipe comes unpolished with a straight-through design for racing applications. This pipe has no cat. Invidia's down pipes are full stainless steel for a great finish and long lasting durability, CNC machined flanges and robot TIG welding complete this incredible design. Fits 02-07 WRX/STi.
Price: $265.00
HS02SW1DPN |
|
|
|
|
INVIDIA DOWNPIPE DIVORCED WASTEGATE
Invidia's downpipe with divorced wastegate is full stainless steel for a great finish and long lasting durability. CNC machined flanges and robot TIG welding complete this incredible design. Less restriction translates into faster turbo spool, giving you an edge over the competition. Fits 02-07 WRX/STi.
Price: $300.00
HS05SW1DPN |
|
|
|
|
INVIDIA UP PIPE (TEST PIPE)
Invidia's up pipe/test pipes are full stainless steel for a great finish and long lasting durability. CNC machined flanges and robot TIG welding complete this incredible design. Less restriction translates into faster turbo spool, giving you an edge over the competition. Fits 02-07 WRX/STi.
Price: $150.00
HS02SW1UPP |
|
|
|
|
MEGAN TYPE-2 BLACK CAT-BACK 08 STi
Megan's stealthy, black coated, cat back acts as an Anti-Corrosion layer that will enhance the durability of your exhaust while also trapping heat and noise within the piping to increase performance and reduce interior resonance while ratining a mellow, yet aggressive tone at wide open throttle. Click for more info. Fits 08+ STi.
Price: $400.00
MR-CBS-SI08ST-OEB |
|
|
|
|
MEGAN RACING CAT-BACK 08 STi
The Megan Racing OE-RS series cat back is based on factory style, with bigger piping and a sound that wont get you pulled over every night! Made of mandrel bent, stailness steel with titanuim muffler tips, this comes with everything you'll need for a direct, bolt on fit. Click for more info. Fits 08+ STi.
Price: $600.00
MR-CBS-SI08ST-OE |
|
|
|
|
MEGAN RACING DOWNPIPE
If you're looking for an inexpensive power adder, this is a great product! 100% stainless steel with a beautiful, polished finish and fits like a glove. Click for more info. Fits 02-07 WRX/STi.
Price: $175.00
MR-SSDP-SI023 |
|
|
|
|
APEXI N1 SERIES CAT-BACK EXHAUST
Aexi's N1 series exhaust for the 2002-2007 Suabru WRX and STI is truly THE benchmark in which others strive to duplicate. The mild steel piping is treated with a special high temperature titanium particle coating, and the polished SUS 304 stainless steel canister features robotic TIG welding for an immaculate finish and years of reliable performance.
Price: $699.00
161-KF01 |
|
|
|
|
HKS CARBON-TI CAT-BACK
Made of SUS304 polished Stainless Steel and smooth, straight-through 3" design, this is one of the most beautiful exhaust systems featuring a carbonfiber-wrapped muffler shell and titanium tip. Fits 02-07 WRX & STi.
Price: $1000.00
3112-EX005 |
|
|
|
|
TURBO XS TURBO-BACK TI EXHAUST
The Turbo XS TI Turbo Back Exhaust includes the 4" Downpipe (WS-DP), 3" Cat-Converter-Pipe (WS-CP), 3" Mid Pipe (WS-MP) and the Titanium-Tipped Muffler (WS-RMA-TI). You can also choose the catless set-up for race-applications only which includes the straight, 3" Race Pipe (WS-RP). Fits 02-07 WRX/STi.
WS-TBE-TI |
|
|
|
|
TURBO XS TURBO-BACK EXHAUST
The Turbo XS Standard Turbo Back Exhaust includes the 4" Downpipe (WS-DP), 3" Cat-Converter-Pipe (WS-CP), 3" Mid Pipe (WS-MP) and 2.5" Muffler Pipe (WS-RMA ). You can also choose the catless set-up for race-applications only which includes the straight, 3" Race Pipe (WS-RP). Fits 02-07 WRX/STi.
WS-TBE |
|
|
|
|
TURBO XS UP-PIPE
The Turbo XS uppipe replaces the factory uppipe connecting the exhaust header to the turbo. New design is all 304 stainless steel and utilizes a high pressure/high temperature flex joint for easy installation. New studs are included. Replacement gaskets are not included, but we recommend using factory, Subaru gaskets. Fits 02-07 WRX/STi.
Price: $170.00
WS-UP |
|
|
|
|
TURBO XS UPPIPE EXTERNAL GATE
The advantage of the External Wastegate is to help the turbocharger operate more efficiently. This is done by relieving a large amount of back pressure pre-turbine housing. Less restrictive turbine housing will allow you to run higher boost pressures which typically results in more horsepower and even the ability to run higher ignition advance if needed. Fits 02-07 WRX/STi.
Price: $280.00
WS-UPEG |
|
|
|
|
TURBO XS CAT-BACK ADAPTER PIPE
The Turbo XS cat-back adapter allows you to use the Turbo XS 4" Bellmouth design downpipe with any cat-back exhaust system. Fits 02-07 WRX/STi.
Price: $130.00
WS-CBAP |
|
|
|
|
TURBO XS 3" RACE PIPE
The Turbo XS Race Pipe is for "off-road" vehicles only. Made of 3" T304 Stainless Steel, this will really open up your exhaust! Fits 02-07 WRX/STi.
Price: $120.00
WS-RP |
|
|
|
|
TURBO XS MID PIPE
The TurboXS 3" Mid Pipe for the 02-07 WRX & STi is constructed of full Stainless Steel, CNC-Machined flanges for a perfect fit and seal and includes an O2 sensor bung for factory compatibility. You'll need the XS Downpipe and the Race Pipe or Cat-Pipe. Fits 02-07 WRX/STi.
Price: $160.00
WS-MP |
|
|
|
|
TURBO XS 4" DOWN PIPE
The Turbo XS downpipe is larger than any other WRX/Sti/FXT downpipe on the market. Why is that important? Because, despite what your girl might tell you, size does matter. Turbos work best when there is large pressure and temperature differential across the turbine wheel. Having a large, free flowing downpipe is what gives you that. Fits 02-07 WRX/STi.
Price: $335.00
WS-DP |
|
|
|
|
TURBO XS STEALTH BACK EXHAUST
The TurboXS Stealth-Back exhaust includes their Downpipe, Mid-Pipe and Cat-Pipe. Fits 02-07 WRX/STi.
Price: $630.00
WS-SBE |
|
|
|
|
TURBO XS RMA-TI MUFFLER)
The Turbo XS RMA-TI is a loud titanium tip muffler for the WRX & STi designed to bolt to the stock Subaru midpipe or Turbo XS Mid Pipe. The RMA-TI muffler features a 3" inner-diameter muffler with beautiful 4" burnt-blue, titanium tip. Fits 02-07 WRX/STi.
Price: $350.00
WS-RMA-TI |
|
|
|
|
CARBIGN CRAFT EXHAUST SHIELD
The Carbign Craft Carbon Fiber Exhaust Heat Shield features a UV-stable clear coat, polished to a brilliant shine to give your Evo that finished look you need. 04-07 WRX.
Price: $150.00
CBX-WRXSHIELD |
|
|
|
GRIMMSPEED TURBO HEAT SHIELD
When it came time to design this product, Grimmspeed didn't want to just create another heat shield to add to the mix, but create another level of product. The basic heat shield would not cut it, they wanted every fitment of turbo, downpipe, and up pipe combination they could work into one design. Purchase just the shield or add new OEM Subaru upper & lower brackets. All WRX & STi.
092002,44021AA014,14427AA022 |
|
|
|
GRIMMSPEED 3" DOWNPIPE ADAPTER
GrimmSpeed has worked with endless amounts of aftermarket gaskets, and exhaust leaks seem to be an all-too-common issue with most modded Subaru's. Cut from steel and hand welded, with the ability to work with both flat style gaskets AND donut gaskets, they are flared out at one end to be just shy of 3" so that, unlike other adapters, this one will not block flow and give you a perfect seal. All Subaru turbo models.
Price: $37.00
077044 |
|
|
|
GRIMMSPEED UP-PIPE TO TURBO GASKET
GrimmSpeed has worked with endless amounts of aftermarket gaskets, and none seem to work as well as the multi-layer steel oem style gaskets. The issue with the oem gaskets from Subaru is that they are so expensive. Well Grimmspeed has your answer, a premium multi-layer steel with stainless steel fire-ring gasket at a great price. WRX & STi.
Price: $14.00
024001 |
|
|
|
GRIMMSPEED MANIFOLD TO CROSSPIECE GASKETS
GrimmSpeed has worked with endless amounts of aftermarket gaskets, and none seem to work as well as the multi-layer steel oem style gaskets. The issue with the oem gaskets from Subaru is that they are so expensive. Well Grimmspeed has your answer, a premium multi-layer steel with stainless steel fire-ring gasket at a great price. WRX & STi.
Price: $19.00
025001 |
|
|
|
GRIMMSPEED MANIFOLD TO HEAD GASKETS
GrimmSpeed has worked with endless amounts of aftermarket gaskets, and none seem to work as well as the multi-layer steel oem style gaskets. The issue with the oem gaskets from Subaru is that they are so expensive. Well Grimmspeed has your answer, a premium multi-layer steel with stainless steel fire-ring gasket at a great price. WRX & STi.
Price: $22.00
020001 |
|
|
|
GRIMMSPEED MANIFOLD TO UP-PIPE GASKET
GrimmSpeed has worked with endless amounts of aftermarket gaskets, and none seem to work as well as the multi-layer steel oem style gaskets. The issue with the oem gaskets from Subaru is that they are so expensive. Well Grimmspeed has your answer, a premium multi-layer steel with stainless steel fire-ring gasket at a great price. WRX & STi.
Price: $12.00
020001 |
|
|
|
STM WELD-IN ALUMINUM O2 BUNG
The STM Aluminum O2 Sensor Bung allows you to add bungs to your custom aluminum exhaust parts. The bungs are extra thick to reduce the chance of warping when welding. Steel plug is also included. M18 x 1.5 Thread. Accepts all standard O2 sensors.
Price: $15.00
|
|
|
|
|
WELD-IN STAINLESS O2 BUNG & PLUG
Standard Oxygen Sensor Bung made of T304 Stainless Steel. Mild Steel Zinc Plated Plug. M18 x 1.5 Thread. Accepts all standard O2 sensors.
1194,1195 |
|
|
|
|
VIBRANT 45° WELD-IN O2 BUNG
Angled design allows for easier installation of an O2 Sensor on applications where there is limited clearance. Bung made of T304 Stainless Steel. Mild Steel Zinc Plated Plug. M18 x 1.5 Thread. Accepts all standard O2 sensors.
1193,1195 |
|
|
|
|
VIBRANT J-STYLE ADJUSTABLE O2 SENSOR FITTING
J-Style Oxygen Sensor Restrictor Fitting with Adjustable Gas Flow Inserts. This J-Style Restrictor Fitting works just like Vibrant's original design but allows for easier installation when clearance under the vehicle is an issue. T304 Stainless Steel.
Price: $39.00
11619 |
|
|
|
|
VIBRANT WELD-IN EGT BUNG
Weld in this bung if you want to insert an EGT (Exhaust Gas Temperature) Sensor into a manifold or downpipe. 1/8" NPT, 27 Threads per inch. Vibrant Performance.
Price: $7.00
1197 |
|
|
|
|
VIBRANT 1/8" EGT BUNG PLUG
Vibrant Performance EGT Sensor Bung Threaded Plug. 1/8" NPT. Zinc Plated Mild Steel
Price: $3.00
11147 |
|
|
|
|
O2 SENSOR FITTING WITH ADJUSTABLE JETS
Oxygen Sensor Simulator Fitting with Adjustable Jets. T304 stainless steel with brass washer. Use one of the three "jets" to help fool the O2 Sensor and eliminate Check Engine Lights.
Price: $24.00
11621 |
|
|
|
REAR O2 SENSOR CHECK ENGINE FIX
Just screw your rear o2 sensor into this, spacing the sensor further from the exhaust flow... Making it think you still have a cat.
Price: $8.00
|
|
|
|
PROSPORT FIBERGLASS HEADER WRAP
Durable, tight woven, 100% Fiberglass, thermo heat wrap is easy to install. One roll will wrap one medium-sized header. This material was hand picked for its heat characteristics and most importantly the flexibility, making wrapping headers much easier.
Price: $30.00
|
|
|
|
|
DEI EXHAUST WRAP
DEI's hi-temp fiberglass composite material is designed to keep heat in the exhaust and evacuate it out of the engine compartment. Wrapping your headers will reduce underhood temperatures by up to 50% while providing additional horsepower and engine protection.
010120,010107,010118,010121,010108,010116,010105
010101,010117,010106,010102,010103 |
|
|
|
|
DEI TITANIUM EXHAUST WRAP
Titanium exhaust wrap, with LR Technology, is made from pulverized lava rock and stranded into a fiber material and is engineered to be stronger than typical wraps on the market today. It has the ability to handle higher heat for improved performance and durability - and with a cool carbon fiber look!
|
|
|
|
|
DEI LOCKING TIES
Keep your exhaust wrap in its place. DEI's fireproof stainless steel locking ties have a melting temperature of 2,500° F. They are rust resistant and non-magnetic.
|
|
|
|
|
DEI HIGH-TEMP SILICONE COATING
Provides lasting protection for any hot surface up to 1500 degrees. DEI recommend the use of this black coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime.
Price: $9.50
|
|
|
|
|
DEI WIRE/HOSE HEAT SHROUD
Made from hi-temp fiberglass fabric bonded to an aluminized material with the added convenience of a hook & loop closure design. Simply wrap Heat Shroud around wires, cables or hoses without the need of removing one end. Protects against oil, dirt and road grime and can be shaped to fit the tightest bends and offers the versatility of fitting diameters from 1/2" to 1 1/4".
Price: $30.00
|
|
|
|
|
DEI HEAT SHEATH ALUMINIZED SLEEVING
Designed to slide over wires, cables and hoses providing the ultimate protection from oil, dirt and road grime. Heat Sheath is very easy to work with and pliable enough to be shaped to fit the tightest bends. Heat Sheath is fireproof and will withstand 500°F direct continuous/2000°F radiant heat.
|
|
|
|
|
DEI FIRE SLEEVE & TAPE KIT
Ideal for protecting against intense underhood heat making it the perfect solution for insulating hoses, wiring, oil and fuel lines and more. Constructed of a woven insulated glass fiber braided sleeve heavily coated with 100% iron oxide silicone rubber, Fire Sleeve is capable of insulating and withstanding direct continuous temperatures up to 500°F. Includes a 16" length of Fire Tape.
|
|
|
|
|
DEI FIRE WRAP 3000
Made from woven insulated glass fiber braided sleeve heavily coated with 100% iron oxide silicone rubber as Fire Sleeve with the same features, benefits and advantages but with the added convenience of a hook & loop closure design. Simply wrap around wires, cables or hoses without the need of removing them.
|
|
|
|
|
DEI FIRE TAPE
Fire Tape is a non-adhesive silicone rubber tape that is self-bonding, self-curing and forms a permanent water-tight barrier that withstands 475°F direct continuous heat. Each roll is 1" wide x 36' length and includes a guide line for easy application.
Price: $40.00
|
|
|
|
|
DEI REFLECT-A-GOLD | ADHESIVE SHEETS
This state-of-the-art polymer is extremely light weight and capable of handling continual operating temperatures up to 850°F. Highly effective material for firewalls, fuel cells, engine covers, etc. and can reflect up to 80% of radiant heat.
|
|
|
|
|
DO-IT-YOURSELF PARTS
Looking for flanges, gaskets, weld-in bungs or exhaust piping? We have a whole section just for you do-it-yourselfers!
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |