DSM | EVO | EVO X | 3000GT | NISSAN | BMW | SUBARU
PTE | PRECISION TURBO & ENGINE | PT6766 CEA TURBO


PTE's PT6766 Turbocharger

Exclusive CEA (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging

Higher efficiency and faster transient response for maximum power and performance

67mm inducer compressor wheel

Compressor cover options:
- "E" compressor cover 3.0" inlet/2.0" outlet
- "S" compressor cover 4.0" inlet/2.5" outlet
- "Ported S" compressor cover 4.0" inlet/2.5" outlet
- "H" compressor cover 4.0" inlet/3" outlet
- "Ported H" compressor cover 4.0" inlet/3" outlet

Exclusive CEAŽ (Competition Engineered Aerodynamics) 66mm, 76 trim turbine wheel

Turbine housing options:
- T3 .63 or .82 A/R with 4 bolt (2.5") discharge
- T3 .63 A/R with 5 bolt discharge (with or without wastegate hole)
- T3 .63 or .82 A/R with 3" V-Band discharge
- V-Band inlet .82 A/R with V-Band discharge
- T4 Tangential .58, .68, .81, or .96 A/R with 3 5/8" V-Band discharge
- T4 Divided .84, 1.0, 1.15, or 1.32 A/R with 3 5/8" V-Band discharge

STM has tested this turbo in the "Ricer" Evo VIII for the 2011 race season before ANYONE even knew what the turbo was to be called! We replaced our previous 6765 from 2010 and with this new turbo we would have expected a loss in spool, but quite the contrary, it spools faster with a significant gain in power. We topped the charts out at 846 HP on our Mustang dyno with 1/4 mile trap speeds of 167 mph... and that's the number that matters!

STM AWD Mustang Dyno: 6765 vs 6766 on Ricer:



"PRECISION TURBO AND ENGINE has announced the addition of all new, ultra high-flow CEA (Competition Engineered Aerodynamics) turbine wheels to their current product line.

Specifically engineered to produce massive power gains over older turbine wheel designs, usage of Precision's new CEA wheels typically results in an average increase of 30-45 horsepower over comparably-sized standard designs. Furthermore, spool-up time is improved when using PTE's CEA turbine wheels to further reduce turbo lag.

Precision's current 62mm turbine wheels will be replaced by the new 62mm CEA version whereas the current 65mm turbine wheels will be replaced with a newly-developed 66mm CEA wheel. Utilizing an enhanced design, the new ultra high-flow turbine wheels will come standard on all of Precision's 62mm and 66mm turbochargers that also feature the exclusive CEA compressor wheels, both ball-bearing and journal bearing versions, including the 5862, 6262, 6266 and 6766 units.

Additionally, all current turbine housing offerings will be available with the new CEA turbine wheels.

Similar in concept to PTE's CEA compressor wheels which are machined from a 2618-aluminum forging for added strength, higher efficiency, faster transient response and maximum performance, Precision's CEA turbine wheels offer unparalleled performance and the best "bang for your buck".

The cutting-edge technology found in Precision Turbo and Engine's CEA turbine wheels and CEA compressor wheels is unlike anything else on the market today. PTE is committed to keeping racers well ahead of the competition by constantly innovating and engineering the most powerful turbos possible."







PTB305-6766,PTB305-6766B,PTB405-6766,PTB405-6766B,PTB505-6766
PTB505-6766B,PTB605-6766,PTB605-6766B,PTB655-6766,PTB655-6766B