DSM
|
EVO
|
EVO X
|
3000GT
|
GTR
|
BIKES
|
SUBARU
|
EVO X SUSPENSION COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
FORTUNE AUTO 500 SERIES COILOVERS
All Fortune Auto shock absorbers use Digressive piston technology. This technology allows for stiff low speed rebound force which helps give better control of driver inputs such as roll, dive and squat. However, at fast stroke speeds (i.e. high speed bumps) the suspension is kept supple in response to bumps and irregularities in the road. Evo X.
Price: $1199.00
|
|
|
|
|
FORTUNE AUTO 510 SERIES COILOVERS
Featuring the new "Ultra" Double Digressive Piston (UDDP) with revised shim stacks, this "Ultra" Digressive piston allows for massive amounts of low speed rebound force that helps with driver inputs such as dive, pitch and roll. After countless hours on the shock dyno and testing on the track, we are proud to offer these high performance coilovers that rival many high end European shocks that cost several thousand dollars more. Due to the ultra digressive nature of this shock absorber, this product is recommended for track use only.
Price: $1599.00
|
|
|
|
|
FORTUNE AUTO THRUST ROLLER BEARINGS
Fortune Auto now makes spring noise and "twang" a thing of the past. Vehicles with front struts tend to turn the front springs on coilover applications. This results in the spring dragging on the spring perches and making an annoying "boing" or "twang" sound. These washer plates sandwich the roller bearings and sit at both ends of the spring/perch. This offers silky smooth operation and is truly a noise-free solution for any 60mm ID coilover!
Price: $50.00
FORTUNE,THRUST,BEARINGS |
|
|
|
MEGAN TRACK SERIES COILOVERS
These coilovers save 2.3 pounds each rear corner over stock and 8 pounds per corner up front! Over 20 pounds shaved off total. The track series feature a gunmetal finish and increased spring rates, mated with more aggressively valved dampers, stiffer shock setting, and heavy-duty piston construction.
Price: $950.00
|
|
|
|
|
MEGAN STREET SERIES COILOVERS
Megan Racing Coil-Over Dampers feature 32 Levels of damper force adjustment, full-height adjustment with front and rear Pillow Ball upper mounts for camber correction.
Price: $950.00
|
|
|
|
|
H&R STREET COILOVERS
H&R Sport Springs lowers 1-2.5" on average. Each coilover shock is custom valved to work in conjunction with a precision-engineered progressive rate spring, creating a finely tuned suspension system. The fully threaded shock body allows for adjustable vehicle height. This feature helps balance vehicle weight, resulting in a lower center of gravity and improved performance and control.
Price: $1700.00
|
|
|
|
TEIN MONO FLEX COILOVERS
Developed for entry-level competition motorsports and advanced street driving. Features include 16-way damping force adjustability, mono-tube internal design, pillowball upper mounts, and EDFC compatibility. Independent adjustments for ride-height and spring pre-load settings for increased suspension tuning.
Price: $2052.00
|
|
|
|
|
TEIN EDFC
The EDFC (Electronic Damping Force Controller) makes it possible for the driver to control the damping force at the touch of a button while in the drivers seat. Stepping motors installed on each shock absorber allow the driver to adjust the suspension to suit all road/track conditions.
|
|
|
|
|
TEIN SUPER STREET COILOVERS
Great for daily driving and occasion track use, whether it be at the drag strip, local circuit, or Auto-X course. Includes both ride height and damping force adjustment to allow the driver to dial in the suspension for various surface conditions.
Price: $1450.00
|
|
|
|
|
KW VARIANT 3 COILOVERS
KW's new Variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by their engineers.
Price: $2700.00
|
|
|
|
|
KW CLUBSPORT COILOVERS
KW Clubsport was developed for customers who demand a better handling car when participating in track day events, but also require an official road approval to use their car everyday. Independently adjustable in compression and rebound forces and include high performance racing springs. Racing top mounts are optionally available for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
Price: $4200.00
35265817 |
|
|
|
|
SWIFT REPLACEMENT COILOVER SPRINGS
While most track racers have already begun the ritual of swapping their springs, many swap from one brand to another, either softer or harder. What if a spring could change other dynamics, such as a noticeably lighter unsprung mass, smoother weight transfer, better ride quality, lower tire temperature, and increased ability to anticipate vehicle reaction? That's exactly what the Swift Metric Coilover Springs offer to you. Click for all opitons.
|
|
|
|
|
SWIFT SPORT SPRINGS
Swift Sport Springs keeps your quality, showroom ride height, and adds the lower, sporty feel for driving enthusiasts who demand only the best. Swift utilizes fewer coils in their design to create a much more responsive spring and create a faster reaction speed towards any road conditions. A lighter, un-sprung mass is another benefit of the Swift lowering springs design.
Price: $300.00
|
|
|
|
|
SWIFT SPRINGS SPEC-R
The Swift Spec-R Sport Springs are made for true track racing enthusiasts wanting to take their Evo to the next level. Spec R Springs are wound with the same engineering as the Swift Sport Springs, with the exception of stiffer rates and a slight change in ride height.
Price: $315.00
|
|
|
|
|
H&R SPORT SPRINGS
H&R Sport Springs lowers 1"-1.5" on average. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort.
Price: $240.00
|
|
|
|
|
TEIN S.TECH SPRINGS
TEIN S.Tech Springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort.
Price: $268.00
|
|
|
|
|
EIBACH PRO KITS
The Eibach Pro-Kit springs will lower the vehicle's center of gravity, reducing body roll in the turns, dive under braking, squat during acceleration giving the car a more solid secure feel at all times while giving the car a more aggressive look: not too slammed, and it won't look like a monster truck anymore!
Price: $245.00
|
|
|
|
HOTCHKIS SPORT SWAY BAR SET
Hotchkis Sport sway bars give the driver the ability to rotate the car on corner entry and steer with the throttle when necessary. The dreaded under steer is eliminated and the handling becomes comfortably neutral with added traction during cornering. Finished in durable anthracite powder coat.
Price: $445.00
|
|
|
|
PERRIN REAR SWAY BAR
PERRIN sway bars are made from solid steel using precision bending equipment. The entire bar is heavily powder coated to fight corrosion and give it that great red finish. Multiple endlink mounting holes are incorporated to allow the installer to custom tailor your driving experience. Perrin sway bars increase stiffness by a minimum of 100% overstock. Evo X.
Price: $249.00
PEP-SUS-220 |
|
|
|
WHITELINE 27MM FRONT SWAY BAR
The Whiteline 27mm 3-point adjustable front sway bar allows its rate to be altered by increasing or reducing the length of the lever arms. This permits the roll stiffness to be tuned for different situations without replacing the entire bar. The stiffer the bar, the more force required to move the left and right wheels relative to each other. This increases the amount of force required to make the body roll. Evo X.
Price: $189.00
BMF55Z |
|
|
|
WHITELINE 27MM REAR SWAY BAR
The Whiteline 27mm 3-point adjustable rear sway bar allows its rate to be altered by increasing or reducing the length of the lever arms. This permits the roll stiffness to be tuned for different situations without replacing the entire bar. The stiffer the bar, the more force required to move the left and right wheels relative to each other. This increases the amount of force required to make the body roll. Evo X.
Price: $189.00
BMF55Z |
|
|
|
WHITELINE 27MM SWAY BAR BUSHINGS
Whiteline 27mm Sway Bar Bushings. Service kit for Whiteline sway bars, containing replacement sway bar "D" mounts. Evo X.
Price: $23.00
KSK003-27 |
|
|
|
|
HOTCHKIS ADJUSTABLE REAR END LINKS
Adjustable Heavy Duty Rear Links feature high quality 3-piece PTFE lined heim joints for smooth quiet operation, specially machined metric high articulation spacers, zinc coated grade-10.9 hardware and hard anodized CNC machined aluminum sleeve. An excellent upgrade for your Evo X with Hotchkis sway bars.
Price: $220.00
|
|
|
|
WHITELINE ADJUSTABLE REAR SWAY BAR END LINKS
The Whiteline Adjustable Rear Sway Bar End Links utilize heavy duty, steel ball joint ends that adjust and rotate to any angular combination. Eliminate sway bar preload via the light weight aluminium bodies providing 25mm center to center length adjustment. Evo X.
Price: $151.00
KLC174 |
|
|
|
TIMMYSPEC REAR ADJUSTABLE CONTROL ARMS
TimmySpec Evo X Rear Upper Adjustable Control Arms are made with heat treated chromoly rod ends with a Teflon liner made in the USA, T6061 anodized center links made in Toronto, T6061 anodized bushings made in Rochester, NY and track-tested in the One Lap of America. Includes full-color, step-by-step assembly instructions.
Price: $339.00
|
|
|
|
WHITELINE ADJUSTABLE REAR CONTROL ARM KIT
The Whiteline Adjustable Rear Control Arm Kit comes complete with 2 adjustable control arms fitted with zero compliance bearings designed to modify factory camber and track on the rear of the Evo X. The result is greater range, more precise adjustment and a more direct connection between body and rear suspension delivering more predictable dynamic behavior. Evo X.
Price: $360.00
KTA135 |
|
|
|
AP REAR ADJUSTABLE CONTROL ARMS
Agency Power's fully adjustable lower control arms for the 2008 and up Mitsubishi Evo X replace the factory units on the left and right to give you more adjustability in camber, better steering response, reduced sprung weight, and improved rigidity. Available in 4 colors.
|
|
|
|
|
MEGAN RACING REAR TOE CONTROL ARMS
These Toe-Control arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. Toe is crucial for the straight line stability and behavior of a car and is said to have more of an effect than the front toe.
Price: $190.00
|
|
|
|
|
WHITELINE SWAY BAR LINK ASSEMBLY
The Whiteline Sway Bar Link Assembly utilizes a high tensile spring steel link fitted with ultra low compliance polyurethane bushes. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 20% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Evo X.
Price: $150.00
KLC139 |
|
|
|
PERRIN P.S.R.S BUSHINGS
The PSRS (Positive Steering Response System) is available in a zero offset or plus offset configuration. Besides removing all the unwanted flex of the OEM bushing, our plus PSRS offsets the mounting location of the bearing. By rotating the PSRS during installation the installer can add up to 1.5 degrees of caster to the front suspension. Evo X.
PEP-SUS-401,PEP-SUS-400 |
|
|
|
|
WHITELINE ANTI-LIFT / CASTER CORRECTION KIT
The Whiteline Race-Only Anti-Lift / Caster Correction Kit features light weight aluminium bushings and offset serviceable bearings for added caster, minimal compliance and optimum feedback. Alloy bushings & spherical bearing (adds +0.5°) Evo X.
Price: $245.00
KCA400M |
|
|
|
|
WHITELINE ROLL CENTER/BUMP STEER CORRECTION KIT
Whiteline Roll Center / Bump Steer Correction Kit is designed to raise the front, roll-center geometry by using specially engineered ball-joints & tie rod ends while still maintaining original steering geometry. Front roll geometry actually encourages roll the lower you go. Evo X.
Price: $205.00
KCA395 |
|
|
|
|
FRONT CONTROL ARM BUSHING KIT
Whiteline Front Control Arm Bushing Kits utilize the latest technology polyurethane materials combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance. Evo VIII-IX.
Price: $90.00
W0593 |
|
|
|
|
RACING BRAKE 2-PIECE OPEN SLOT ROTORS
You save almost 3.5 pounds per rotor by switching to a 2-piece, that's 14 pounds of rotating mass GONE! Not to mention the Open Slot cooling advantages. These are some bad ass rotors.
|
|
|
|
|
GIRODISC 1-PIECE SLOTTED ROTORS
The edges of the slots continuously clean and refresh the pad surface, allowing the pads to have a maximized friction surface always available. Additionally, they prevent contaminants from collecting between the pad and disc interface. The disc is lightened, decreasing its rotational inertia.
|
|
|
|
|
GIRODISC 2-PIECE SLOTTED ROTORS
Direct replacement for the OE disc and works with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. Weight savings are about 12 pounds up front and 10 in back.
|
|
|
|
|
POWERSLOT ROTORS
Power Slot's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface clean and in wet, raining conditions, helps push water off the braking surface for better stopping power.
|
|
|
|
|
PROJECT MU NS STREET BRAKE PADS (FRONT)
Project Mu NS Street Pads are developed specifically for street use. Guaranteed to outperform OEM pads, Project Mu NS street pads are reliable in any weather or road conditions. NS street pads give outstanding initial stopping power that is of prime importance on the street. Made from an Asbestos-free brake compound, NS street pads also have very minimal dust and very low squeal properties.
|
|
|
|
|
RAYBESTOS ST43 BRAKE PADS
Raybestos ST43 Pads are a favorite track pad. Very aggressive pad, yet easy on the rotors. Made of a hard compound they last a very long time and never fatigue. A very reasonably priced pad, the ST43 pad is a track favorite and highly recommended.
|
|
|
|
|
FERODO RACING BRAKE PADS
Ferodo Racing brake pads offer two compounds: DS2500 for aggressive street use and weekend track days, and the DS3000 that are not recommended for everyday street use, however if you can ignore the noise, produce truly impressive performance!
|
|
|
|
|
STOP-TECH STREET BRAKE PADS
StopTech Street Performance brake Pads are engineered to meet the demands of high performance driving while maintaining the refinement and comfort expected in everyday driving conditions. StopTech brake pads combine the benefits of premium street brake pads with aggressive friction formulas suitable for light track day and autocross use.
|
|
|
|
|
HAWK HPS BRAKE PADS
HPS Performance Street Brake Pads offer 20-40% more stopping power and higher resistance to brake fade than most OE pads and are formulated to run cleaner and release extremely low levels of dust in normal street driving. Fits OEM Brembos on Evo X.
|
|
|
|
|
THE BRAKE MAN FRONT BRAKE PADS
The Brake Man Front Brake Pads are available for the Evo X OE Brembo calipers in the High Performance Street (#93 compound) and Track (#3) for roadrace & autocross.
|
|
|
|
|
THE BRAKE MAN REAR BRAKE PADS
The Brake Man Rear Brake Pads are available for the Evo X OE Brembo calipers in the High Performance Street (#93 compound) and Track (#3) for roadrace & autocross. *#3 compound will require the GiroDisc Rear Brake Pad Adaptors.
|
|
|
|
|
GIRODISC ANTI-NOISE PAD SHIMS
These shims utilize the exact material used by many OEM's to absorb vibration and dampen noise. These shims have a highly slippery face and tabs on the edges to hold the shim in place during installation and use.
|
|
|
|
|
GIRODISC TITANIUM HEAT SHIELDS
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. These are very effective and have the added benefit of extending the service life of the dust boots and seals in the calipers.
|
|
|
|
|
BREMBO CALIPER SEAL REBUILD KITS
Girodisc offers their own line of seals to rebuild your Evo X calipers back to like new. One kit is required per caliper. Take a look at the Titanium Heat Shields, so you aren't rebuilding your calipers so soon.
|
|
|
|
|
GOODRIDGE BRAKE LINES
Constructed from the finest quality hose and covered by braided stainless steel. In addition to providing a more responsive and firm brake pedal by eliminating the "spongy" feel that often accompanies stock rubber brake lines. Abrasion and corrosion resistant to stay good looking for a long time to come. Evo X.
Price: $119.00
|
|
|
|
|
AGENCY POWER EVO X BRAKE LINES
The brakeline kits are made in the USA to meet strict D.O.T. certifications. The steel braided lines are a smoke color with the AP logo printed on it. The CNC machined fittings are in classic Agency Power Gold to separate you from the competition. All kits are assembled for a quick and easy install.
|
|
|
|
|
CNC STAGING BRAKE
CNC Series 412 Staging Brake features total-seal rubber boots and a straight, chrome handle. Does not affect or hinder foot brakes. Comes equipped with fittings for either standard American 3/16" inverted flare brake line or 10mm metric thread-bubble flare brake line.
Price: $176.00
|
|
|
|
NRG INNOVATIONS RACING LUG NUTS
NRG Innovations aluminum lug nuts. Made of super lightweight forged aluminum for strength and less weight. Knurled ends for easy hand tightening, narrowed head for easy installation onto wheel studs. Fits most aftermarket and performance wheels. Sold as a set of 20. M12 x 1.5 for Mitsubishi applications. (Not for stock wheels).
|
|
|
|
FULL BLOWN LIGHTWEIGHT ALUMINUM LUG NUTS
Full Blown's super light weight nuts are forged from durable 7075 aluminum alloy and anodized for corrosion resistance! Sold as a set of 20. M12 x 1.5 for Mitsubishi applications.
|
|
|
|
MUTEKI OPEN ENDED TUNER LUG NUTS
Muteki Open Ended Lug Nuts. Muteki translates to "No Equal" which is the performance light-weight, high strength street lug nuts for import applications. These open ended lugs accomodates longer wheel studs over stock. Sold as a set of 20. M12 x 1.5 for Mitsubishi applications. (Not for stock wheels).
31886B,31886U,31886R,31886L,31886C |
|
|
|
MUTEKI SR48 EXTENDED NUTS (BURNING BLUE)
Muteki SR48 Extended Racing Lug Nuts are made of 50BV30 steel which allows for a uniform-chemical composition, low percentage of harmful elements, high purity, and excellent hardenability that is perfect for high-strength light weight lug nuts. Sold as a set of 20. M12 x 1.5 for Mitsubishi applications. (Not for stock wheels).
Price: $114.00
32906UN |
|
|
|
MUTEKI SR48 EXTENDED NUTS (NEO CHROME)
Muteki SR48 Extended Racing Lug Nuts are made of 50BV30 steel which allows for a uniform-chemical composition, low percentage of harmful elements, high purity, and excellent hardenability that is perfect for high-strength light weight lug nuts. Sold as a set of 20. M12 x 1.5 for Mitsubishi applications. (Not for stock wheels).
Price: $114.00
32905N |
|
|
|
GORILLA TUNER LUG NUTS
Gorilla small diameter lug nuts are designed to fit all tuner wheels. Gorilla small diameter lug nuts' closed-end bulge design prevents rusting problems, produces better torque, and prevents breakage. Gorilla small diameter lug nuts are heat-treated and plated for strength and beauty. Sold as a set of 20. M12 x 1.5 for Mitsubishi applications. (Not for stock wheels).
21133 |
|
|
|
ARP EXTENDED WHEEL STUDS
These are longer and stronger replacement wheel studs. They are heat treated 8740 chrome moly steel with a cadmium plating for extra durability with a tensile strength of 190,000 psi to handle all kinds of competition racing. Stock lug nuts will not fit these, open-ended nuts above will work perfectly! M12 x 1.5 Mitsubishi thread.
Price per 5 pack: $39.00
100-7717 |
|
|
|
MOTUL RBF 600 BRAKE FLUID
100% synthetic fluid for hydraulic-actuated brake and clutch systems. Specifically designed to resist the high temperatures of actuated (steel or carbon) racing brakes and clutch systems.
Price: $20.00
|
|
|
|
|
ATE SUPERBLUE BRAKE FLUID
High performance Brake Fluid ideal for road racing, autocross, and high performance driving. Exceeds all DOT 4 requirements. Dry boiling point 536° F, wet boiling point 396° F. This fluid is NOT SILICONE and is compatible with conventional brake fluid.
Price: $21.00
|
|
|
|
|
GIRODISC CALIPER PISTON SPREADER
Made from steel and powder coated for durability. The slider is cadmium plated. The pivot bushings are all made from nylon and will ensure smooth action. This tool will quickly become invaluable to any team, shop, or enthusiast who changes pads and rotors with any frequency.
Price: $225.00
|
|
|
|
|
SIMPSON RACING SKYJACKER PARACHUTE
These Simpson Skyjacker reinforced nylon parachutes utilize a handmade crossform design that's reliable and durable up to 200 mph. They have a 10 ft. plume, which extends 12 ft. from the car and uses a 12" pilot chute and compression launch spring. The 0.090" alloy mounting plate allows for bolt-on installation, and they include a Nomex chute pack and backing.
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |