DSM
|
EVO
|
EVO X
|
3000GT
|
GTR
|
BIKES
|
SUBARU
|
EVO X INTAKE & INTERCOOLER COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
BUSCHUR INTAKE PIPE KIT (w/ MAF)
The gains as seen on the Buschur Racing Mustang dyno are as much as 10whp and 11tq more than the stock air intake. Kit includes pipe (polished or brushed aluminum), couplers, clamps, K&N filter, new recirc hose for your BOV along with a mounting bracket and all hardware needed for installation. You can also purchase only the pipe and couplers.
|
|
|
|
|
AMS INTAKE PIPE (EVO X)
The AMS Evo X Performance Intake removes clutter and simplifies your engine bay while adding horsepower! The exclusive design improves air flow to the turbocharger, increasing horsepower and performance. Available in polished or black. Click for more info.
|
|
|
|
|
K&N 69 SERIES TYPHOON INTAKE KIT
Built for performance and show, the K&N Typhoon Air Intake System is a free-flowing mandrel-bent aluminum tube induction system with a wrinkle red finish.
Price: $390.00
69-6546TWR |
|
|
|
|
COBB TUNING TURBO INLET HOSE
COBB's design utilizes a custom steel reinforced silicone that eliminates the issue of hose collapse that other inlet pipes suffer while under suction at peak air flow, nd the smooth inner walls reduce the air turbulence that occurs in the factory accordion style inlet. Available in black or blue silicone.
|
|
|
|
|
PERRIN INTAKE HOSE
The PERRIN Performance inlet hose is a direct replacement for the OEM rubber turbo inlet hose for your Evo X. Once installed, you will see consistent gains in horsepower, throttle response and fuel economy. The turbo inlet hose includes the multilayer, wire reinforced silicone hose, along with high quality hose clamps.
Price: $110.00
PEP-INT-410 |
|
|
|
|
SAMCO SPORT INTAKE HOSE
The Samco Turbo Inlet Hose improves turbo spool and throttle response by replacing the restrictive stock inlet pipe. This pipe is made with 4ply high temperature reinforced samco silicone. Available in black, blue and red.
|
|
|
|
|
K&N UNIVERSAL CONE AIR FILTERS
K&N's Universal Air Filters are designed and manufactured for a wide variety of applications. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16" (1.5mm) to fit in-between sizes. Please click the image for more info.
|
|
|
|
|
VIBRANT "OPEN FUNNEL" AIR FILTERS
Vibrant Open Funnel Air Filters feature an inverted filter cap design which greatly increases the filter surface area for improved air flow and filtration. Cotton-Gauze Filter Element / Rubber Base. Please click the image for more info.
|
|
|
|
|
HKS SUPER HYBRID AIR FILTER
The HKS high-performance Super Hybrid Filter is a direct replacement to your OEM air filter. Super Hybrid Filters features a 3-layer dry-type filter. The filter element is bonded to a flexible nylon frame and offers a price-friendly performance alternative to a full intake system.
Price: $45.00
|
|
|
|
|
K&N DROP-IN FILTER
K&N's factory replacement air filters will not void any warranty and will give you a bit more HP along with freeing up some air flow giving you better gas mileage. This filter is a direct drop-in and only takes minutes to install.
Price: $60.00
|
|
|
|
|
K&N BREATHER FILTERS
K&N's Crankcase Vent Filters are designed to clamp directly to metal or plastic tubing. Ideal for engines, transmissions, oil or gas tanks on racing vehicles. Available in a wide variety of sizes and applications. Please click the image for more info.
|
|
|
|
|
VIBRANT BREATHER FILTERS
Vibrant Performance Crankcase Breather Filter with Chrome Cap. Cotton Gauze Filter Element / Metal Base. Available in a wide variety of sizes and applications. Please click the image for more info.
|
|
|
|
|
BUSCHUR RACING INTAKE SHIELD
When an open element filter is installed on the X there is a "stumble" issue when using the A/C. Once the engine temperature goes up the A/C fan will kick on. When this happens the hot air is forced into the air filter. This shield prevents that from occuring as it blocks the extra hot air from entering the system.
Price: $105.00
|
|
|
|
|
BUSCHUR UPPER IC PIPE
The Buschur Racing 2008 Mitsubishi Evolution X upper intercooler pipe is made from 2.5" mandrel bent stainless steel and includes couplings and clamps.
You will see a decent gain in HP and Torque, and also, notice increased throttle response.
|
|
|
|
BUSCHUR LOWER IC PIPE
The tubing (available brushed or polished) is mandrel bent 304 grade Stainless Steel, a little shorter and much smoother than the stock one. Also, you're able to relocate the BOV return hose using the stock hose to make it all look a LOT better under the hood. This will work with the factory FMIC and will work with the Buschur X FMIC as well!
|
|
|
|
BUSCHUR LOWER IC PIPE (EVO X MR)
The buschur MR pipe is a little shorter and much smoother than the stock one. This will allow you to relocate the BOV return hose using the stock hose to make it all look a LOT better under the hood. The tubing is mandrel bent 304 grade SS. The lower i/c pipe (and the Buschur upper i/c pipe) both work with the factory FMIC and the Buschur FMIC, but WILL NOT work with the stock airbox.
|
|
|
|
AMS UPPER IC PIPE
Direct replacement for your factory upper intercooler pipe. Available with a black powdercoat finish or polished aluminum. By simply installing this Upper Intercooler Pipe you can expect to see 5 awhp peak and 10+ awhp gains in the midrange over stock without even re-tuning the ECU!
|
|
|
|
AMS LOWER IC PIPE (EVO X)
This is a direct replacement for your factory lower intercooler pipe. Made from lightweight 2.5" mandrel bent aluminum tubing with bead rolled pipe ends then mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. And it is all beautifully tig-welded at AMS in Chicago.
|
|
|
|
ETS LOWER INTERCOOLER PIPING KIT
Removes the factory rubber hoses which are prone to ballooning and popping off under higher boost pressure. From the intercooler outlet the 2.5" mandrel bent piping continues around the core support, with only two gradual radius bends in its entire length, to the lower intercooler pipe bracket before making a straight shot to the throttle body.
ETS_EVOX_LICP |
|
|
|
ETS UPPER INTERCOOLER PIPE KIT
The ETS Mitsubishi Evolution X Upper Intercooler Pipe Kit removes the restrictive factory pipe which necks down to 1.75" before the turbo outlet and replaces it with a full 2.5" upper intercooler pipe which helps with throttle response as well as reliability. The factory hoses are prone to ballooning and blowing off under high boost.
ETS_EVOX_UICP |
|
|
|
ETS REAR UPPER INTERCOOLER PIPE
The ETS Mitsubishi Evolution X Upper, Rear Pipe removes the restrictive factory pipe which necks down to 1.75" before the turbo outlet and replaces it with a full 2.5" upper intercooler pipe which helps with throttle response as well as reliability. The factory hoses are prone to ballooning and blowing off under high boost.
ETS-Evo-X-Upper-Only |
|
|
|
ETS UPPER & LOWER INTERCOOLER PIPE KIT
The ETS Upper & Lower Piping Kit includes all mandrel-bent, stainless steel, 2.5" piping available in 4 different finishes and includes stainless T-clamps and black silicone couplers.
ETS_EVOX_PipingKit |
|
|
|
ETS TITANIUM UPPER INTERCOOLER PIPE KIT
The all new ETS Titanium Series upper intercooler pipe is designed for maximum durability and performance by eliminating many of the unnecessary bends in the stock piping that snake around the stock engine bay.
ETS_EVOX_TI_UICP |
|
|
|
BUSCHUR INTERCOOLER
The Buschur Racing FMIC upgrade core measures at 12" x 4.5" x 18" which is the largest core offered by any company for the Evo X. When dyno tested, it has shown a gain 21.3hp and 19ft tq. while keeping intake temps down to a minimum on the Buschur Racing Project X.
The kit will include all couplings, clamps and hardware needed for installation.
Price: $770.00
|
|
|
|
AMS INTERCOOLER
This is a direct bolt-on utilizing your stock piping and mounting points with purpose built end tanks for the EVO X. With over 80% more internal flow area than its stock counterpart, AMS's stock EVO X gained 10 Wheel horsepower over the stock core just by bolting it on, without even re-tuning the ECU! Click for more info.
|
|
|
|
ETS INTERCOOLER
The ETS Evo X Intercooler factory in and out locations allow for the inlet and outlet to be at diagonally opposing corners of the core. This provides the best possible airflow distribution through the core's height making sure that all charge rows are used effectively. The AutoCAD drawn endtanks are as smooth as on the previous EVO intercooler with aluminum metal forming that looks more like artwork than endtank. Available with or without the ETS stenciled logo, 4 different core thickness sizes and anodizing color options. Click for more info.
ETS_EVOX_Intercooler |
|
|
|
ETS INTERCOOLER KIT
The ETS Evo X Intercooler Kit includes full stainless piping available in 4 finish options. The intercooler is available with or without the ETS stenciled logo, 4 different core thickness sizes and anodizing color options. Click for more info.
ETS_EVOX_IntercoolerKit |
|
|
|
PERRIN FRONT MOUNT INTERCOOLER
A key to making more power on any turbocharged engine is the addition of a high performance air-to-air intercooler. This part in the simplest of terms, cools the air going from the turbo into your engine, much the same as a radiator cools the water inside the engine, by transferring the excess heat way using multiple passages through a core. A PERRIN intercooler fits easily to the front of your car to maximize cooling.
PEP-ENG-405SL,PEP-ENG-405BK |
|
|
|
FORGE MOTORSPORT INTERCOOLER
The Forge Motorsport Intercooler is larger than the OEM intercooler and uses a highly efficient tube and fin core design. Core measures a massive 21"x14"x4." Requires no cutting and factory pipes can be used.
Price: $1000.00
FMINTEV10 |
|
|
|
BUSCHUR RACING MISCELLANEOUS CORE
This core has the end tanks already in place for those of you looking for a DIY project or custom set-up's. It measures in at 24" x 3.5" x 10.5"
Price: $509.00
|
|
|
|
OMNI POWER MITSUBISHI MAP SENSORS
Omni Power USA 3, 4 & 7 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes.
MAP-MITS-3BR,MAP-MITS-4BR,MAP-MITS-7BR |
|
|
|
ETS 3.5" MAF ADAPTER
The ETS Mitsubishi Evolution X 3.5" Maf Housing with Velocity Stack is made to replace your stock housing to allow more air flow for your high horsepower Evo X. Made with a 5" wide velocity stack to allow the use of a larger filter for maximum air flow. Optional Filter & Coupler available. This is a critical component for making high horsepower on the Evo X. If your reaching .5v on your current setup, this is needed for higher air flow.
Price: $250.00
ETS_EVOX_35_MAF |
|
|
|
|
JMF EVO X MAF FLANGE
If you're looking to make your own intake pipe, you'll need one of these! CNC machined from 6061 billet aluminum, the bottom side is contoured to fit snug on the tubing for a perfect fit and easy weld. Holes are tapped for a 10-32 thread and new hardware is included. Click for more info.
Price: $60.00
|
|
|
|
|
K&N FILTER RECHARGER KIT
K&N Filter Recharger Service Kit. A six-step maintenance system designed to clean any K&N Filtercharger Air Filter. Restores air flow efficiency so your Filtercharger performs like new! 6.5 oz. Spray Oil & 12 oz. Filter Cleaner
Price: $13.00
|
|
|
|
|
UNIVERSAL CLAMPS, COUPLERS & HOSE
Click here for our exclusine line of STM Silicone Couplers, T-clamps, hose clamps, silicone hose, T-fittings and more.
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |