DSM
|
EVO
|
EVO X
|
3000GT
|
NISSAN
|
BMW
|
SUBARU
|
EVO VIII-IX INTAKE & INTERCOOLER COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
STM PORTED INTAKE MANIFOLD
Looking for something to gain a bit up-top while still retaining your low end power? This is the manifold for you. Runners are port-matched to a factory gasket. Throttle body is port-matched to accept a 65mm TB. Fits Evo VIII-IX. The port work is $150 + a $150 core charge for your intake manifold which is refunded when STM receives it.
Price: $300.00 ($150 core refund)
|
|
|
|
STM INTAKE PIPE KIT (MAF SENSOR)
The STM Intake Pipe is designed for your Evo VIII-IX running the stock MAF sensor and will adapt to any stock-style blow off valve. Included in the full kit is the tig welded, polished aluminum pipe, K&N Breather Filter for your valve cover, MAF adapter and your choice of Vibrant or K&N air filter. Be sure to select the pipe according to ACD models.
|
|
|
|
STM 2.5"/3" INTAKE PIPE KIT (NO MAF)
Made in-house of lightweight aluminum and designed for cars running without the MAF. Includes a Vibrant or K&N air filter, 2 hose clamps and 3" or 2.5" coupler. Evo VIII-IX.
|
|
|
|
STM 4" INTAKE PIPE KIT (NO MAF)
The STM 4" Intake Pipe kit is designed for cars running no maf with a 4" turbo inlet. It comes with a K&N air filter, high-quality silicone coupler, polished aluminum intake pipe and two hose clamps. Fits Evo VIII-IX.
Price: $149.00
|
|
|
|
STM INTAKE MANIFOLD SENSOR ADAPTER
The STM intake manifold sensor adapter gives you an 1/8" NPT thread allowing you to cleanly attach a map sensor, pressure sensor (or any other of your choice) directly on your Evo VIII-IX or 95-99 DSM manifold.
Price: $25.00
|
|
|
|
STM INTAKE MANIFOLD BOLT KIT
Comprised of all OEM Mitsubishi hardware, STM has you covered if you are installing a brand new intake manifold and don't want to re-use your crappy old bolts.
Price: $30.00
|
|
|
|
STM THROTTLE BODY SHAFT SEALS
STM Throttle Shaft Seals. Sold as a pair. When these seals wear out, they can cause leaks, sticking, and jamming of the throttle plate. We tested a car on our dyno at STM with OEM leaky seals... When the seals were replaced, we picked up 20 whp and 20 ft pounds! Incredible Boost Leak!
|
|
|
|
STM UPPER INTERCOOLER PIPE KIT
The STM Upper Intercooler Pipe Kit is 2.5" aluminum piping for light-weight benefits and includes 6 stainless T-Bolt clamps and 3 high-quality black, silicone couplers. Can be flanged for TiAL or stock bov and is designed to work with your stock intake manifold. Add an Air Intake Temp Bung for $30.
|
|
|
|
BUSCHUR UPPER IC PIPE
Buschur's upper intercooler pipe upgrade is made of polished mandrel bent 2.5" 304 stainless steel and eliminates 6 bends and 16" of length thereby reducing the flow restriction (less length, less bends, less restrictive flow). You will need to run this pipe (or a sililiar pipe) in conjunction with the small battery kits.
Price: $280.00
|
|
|
|
JMF LOWER IC PIPE KIT
The JMF lower pipes are made from 2.5" polished aluminum, and comes with black, 4-ply silicone couplers, and heavy duty SS T-bolt clamps. Evo VIII-IX.
Price: $285.00
|
|
|
|
K&N UNIVERSAL CONE AIR FILTERS
K&N's Universal Air Filters are designed and manufactured for a wide variety of applications. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16" (1.5mm) to fit in-between sizes. Please click the image for more info.
|
|
|
|
|
K&N AIR FILTER & ADAPTER
K&N 4.5" Filter and Vibrant adapter will attach right to your MAS air meter. Evo VIII-IX.
Price: $60.00
|
|
|
|
|
VIBRANT AIR FILTER AND ADAPTER
Filter adapter works with any 4.5" Inner Diameter air filter and will attach right to your Evo VIII-IX MAS air meter. Vibrant Air Filters with inverted filter cap design greatly increase the filter surface area for improved air flow.
Price: $48.00
|
|
|
|
|
VIBRANT MAS ADAPTER PLATE
Vibrant Performance Mass Air Flow Sensor Adapter Plate. T6061 Aluminum.
Price: $23.00
|
|
|
|
|
K&N FACTORY REPLACEMENT FILTER
K&N's stock-replacement, drop-in air filter for Evo VIII-IX is designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Our stock replacement air filters for street vehicles are covered by K&N's Million-Mile Limited Warranty.
Price: $59.00
|
|
|
|
|
HKS SUPER MEGA FLOW INTAKE
These intake systems feature the HKS new Reloaded air filter assembly which maintains the HKS race proven and patented Super Funnel design, but also incorporates new technical advances for improved performance and filtration.
Price: $215.00
|
|
|
|
HKS REPLACEMENT FILTER ELEMENT
HKS replacement, 200mm, wet 2-layer, dual density construction filter elements are available here in 5 colors. The wet 2-layer type is included in Racing Suction kits and is focused on maximizing airflow for performance, yet still keeping harmful particles from the engine.
|
|
|
|
K&N BREATHER FILTERS
K&N's Crankcase Vent Filters are designed to clamp directly to metal or plastic tubing. Ideal for engines, transmissions, oil or gas tanks on racing vehicles. Available in a wide variety of sizes and applications. Please click the image for more info.
|
|
|
|
|
VIBRANT BREATHER FILTER
Vibrant Crankcase Breather Filter. (3/8" inlet I.D.)
Price: $10.00
|
|
|
|
|
BUSCHUR RACING PORTED THROTTLE BODY
Buschur Racing 65mm throttle body conversion for the Evo VII-IX. Still retains all factory features and idle air control motor. This is a factory throttle body, machined, with a new 65mm butterfly installed. New OEM ported gasket is also included. You will need to supply a core, click for more info.
Price: $300.00
|
|
|
|
SKUNK2 PRO-SERIES 68MM THROTTLE BODY
Skunk2's 68mm Pro Series Throttle Body Black Series features a hard anodized finish and designed to be used with OEM intake tubing and intake manifold as well as the Skunk2 Pro Series Intake Manifold for bolt-on horsepower and torque gains by optimizing engine airflow.
Price: $370.00
|
|
|
|
SKUNK2 INTAKE MANIFOLD
The intake manifold solution street-driven Evo VII-IX owners have been waiting for is here. Skunk2's Evo Pro Series Intake Manifold was designed with "street enthusiasts" who utilize turbochargers as small as the factory unit in mind and want more power without sacrificing mid-range performance.
Price: $525.00
|
|
|
|
MAGNUS V5 CAST ALUMINUM MANIFOLD
After 2 years of R&D, Magnus is proud to release this massive 5 liter plenum, cast aluminum manifold. Gains from 30-52awhp have been seen in their testing. If you're looking for big power sooner... take a look here.
Price: $999.00
|
|
|
|
JMF "DRAG" INTAKE MANIFOLD
We've all heard the saying "Bigger is Better" ...That statement couldn't be more true when it comes to turbocharged cars and intake manifolds. Introducing the JMF Aluminum DRAG VERSION Sheetmetal Intake Manifold for the Evo VIII-IX. This intake manifold is for the hard core racers only! If your running a 35R or larger turbo, click here! ...If your not then keep on scrolling down!
Click for more information.
Base Price: $970.00
|
|
|
|
JMF "RACE" INTAKE MANIFOLD
JM Fabrications manifolds are hand made from high quality aluminum. Comes with a custom stainless dipstick tube, 5 vacuum ports and many extra options. Shown is the un-polished manifold. These are made to order and may take 2 weeks for delivery, but well worth the wait.
Click for more information.
Base Price: $790.00
|
|
|
|
MIL.SPEC THROTTLE BODY SHAFT SEALS
These seals keep the throttle plate shaft centered and positioned in the throttle body. When they wear out, they can cause leaks, sticking, and jamming of the throttle plate. Sold as a pair of seals. Add an OEM throttle body gasket for $4.
|
|
|
|
MAGNUS HEAT BARRIER GASKET
The Magnus Motorsports Heat Barrier Gasket replaces the stock gasket and forms a heat barrier between the intake manifold and the cylinder head to dramatically reduce intake manifold temperatures. Best part about this gasket is that it is reusable! No additional sealant or gaskets are required. Evo VIII-IX.
Price $36.00
|
|
|
|
|
BUSCHUR RACE CORE & BFIC
This is what STM runs on the Ricer, and what we recommend to most all our customers who are looking to make some power! Buschur's Race Core measures in at 24x13x4, but if you're looking for a Big F***ing Inter Cooler, check out the BFIC measuring in at 24x13x4.5! Yes, boys, size does matter!
|
|
|
|
BUSCHUR STREET CORE
The Buschur Street Core requires no cutting or modifications to the vehicle other than minor trimming of the front lower splash shield. The core is rated for 950hp with very minimal pressure drop and measures in at 24x13x3.5.
Price: $669.00
|
|
|
|
BUSCHUR RACING MISCELLANEOUS CORE
This core has the end tanks already in place for those of you looking for a DIY project or custom set-up's. It measures in at 24" x 3.5" x 10.5"
Price: $509.00
|
|
|
|
K&N FILTER RECHARGER KIT
K&N Filter Recharger Service Kit. A six-step maintenance system designed to clean any K&N Filtercharger Air Filter. Restores air flow efficiency so your Filtercharger performs like new! 6.5 oz. Spray Oil & 12 oz. Filter Cleaner
Price: $13.00
|
|
|
|
|
UNIVERSAL CLAMPS, COUPLERS & HOSE
Click here for our exclusine line of STM Silicone Couplers, T-clamps, hose clamps, silicone hose, T-fittings and more.
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |