DSM
|
EVO
|
EVO X
|
3000GT
|
NISSAN
|
BMW
|
SUBARU
|
90-99 DSM SUSPENSION COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
STM FRONT LIGHTWEIGHT BRAKE KIT
STM Front Brake Kit for 90-99 DSM allows you to shed 30 pounds off the weight of your car, and 11.7 of those pounds is rotating mass! Not only is it lightweight, but it looks pretty damn good too. Choose between the scalloped or standard rotor and choose your hat color: Black, purple or gold.
|
|
|
|
STM ABS DELETE KIT (1G 90-94)
The STM ABS Delete Kit includes everything you will need to remove the clutter and weight of your rusty, old, factory ABS system. Comprised of OEM components, high-quality fittings and stainless-steel, braided and coated lines. 90-94, AWD & FWD.
Price: $250.00
|
|
|
|
STM ABS DELETE KIT (2G 95-99)
The STM ABS Delete Kit includes everything you will need to remove the clutter and weight of your rusty, old, factory ABS system. Comprised of OEM components, high-quality fittings and stainless-steel, braided and coated lines. 95-99, AWD & FWD.
Price: $250.00
|
|
|
|
THE BRAKE MAN FRONT DRAG KIT
Looking for the lighest, most bad-ass drag race kit out there? Here ya go. The Brake Man will stop your drag car from 300 mph runs. STM runs this exact set-up on the blue Ricer Evo down the strip at 150+ mph... DSM's like Shepherd's TSI and Sean Glaser's 1g also use the Brake Man Drag systems.
Click for more info.
Starting at $2100.00
|
|
|
|
|
THE BRAKE MAN REAR DRAG KIT
Lighten up! It's worth every penny. Here is the Brake Man's rear drag racing kit for 90-94 and 95-99 AWD models. Fitment has yet to be determined on the FWD models. Includes everything you'll need to swap out your crappy old, heavy brakes!
Click for more info.
Starting at $1600.00
|
|
|
|
|
DBA 4000 SERIES BRAKE ROTORS (90-99)
DBA's Australian range of enhanced performance brake rotors brings sensational stopping power, purposeful appearance and unique technology giving them a winning edge on the street or track. Each DBA series range offers a number of special features, including the Kangaroo Paw ventilation design, to suit a variety of applications. Click for more info.
|
|
|
|
|
RACING BRAKE ROTORS (90-99)
Racing Brake rotors are curved slotted and drilled from an alloyed gray iron with an EDP coating (to help repel salt) with cross cut grinding.
|
|
|
|
|
POWERSLOT ROTORS (90-99)
Power Slot's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface clean and in wet, raining conditions, helps push water off the braking surface for better stopping power.
|
|
|
|
|
WILWOOD SCALLOPED ROTOR
Wilwood Vented Iron-Scalloped Rotor 11.75" x .810 8 on 7.00. Replacement rotor for STM Front Brake Kits. Price is for one rotor.
Price: $100.00
|
|
|
|
|
WILWOOD ULTRALITE VANE ROTOR
Wilwood Ultralite Vane Rotor Rotor 11.75". Replacement rotor for STM Front Brake Kits. Price is for one rotor.
Price: $85.00
|
|
|
|
|
WILWOOD BRAKE PADS
Wilwood replacement Brake Pad for "Forged Dynalite" Calipers on the STM Front Brake Kit.
Price: $50.00
|
|
|
|
|
THE BRAKE MAN FRONT BRAKE PADS
The Brake Man Front Brake Pads are available for the F3 Tornado calipers in the Brake Man's Drag Kits.
|
|
|
|
|
THE BRAKE MAN BRAKE PADS (REAR)
The Brake Man Rear Brake Pads are available for the F1 Tornado calipers in the Brake Man's Drag Kits.
|
|
|
|
|
HAWK PERFORMANCE HPS PADS
Hawk Performance HPS pads offer 20-40% more stopping power and higher resistance to brake fade than most OEM pads. This makes them more responsive and durable than most standard original brakes and makes Hawk Performance HPS pads the first, and least expensive, way to increase stopping power. Rear Pads are not available for 90-94.
|
|
|
|
|
D2 COILOVERS 95-99 DSM
The D2 RS coilover system is a 36 way dampner and rebound adjustable monotube full coilover system. The setup has seperate height and preload adjustments allowing for optimal adjustment. Mounts are constructed of 6061 powder coated aluminum. Threads are teflon coated to prevent rust. 95-99 DSM.
Price: $1000.00
|
|
|
|
|
TEIN TYPE FLEX COILOVERS (95-99)
Developed for drivers seeking an aggressive coilover that can be used daily, and provide all the adjustments needed for circuit use. Compatible with the EDFC (Electronic Damping Force Controller) for added convenience and adjustability. 95-99 DSM only.
Price: $1460.00
|
|
|
|
|
TEIN EDFC
The EDFC (Electronic Damping Force Controller) makes it possible for the driver to control the damping force at the touch of a button while in the drivers seat. Stepping motors installed on each shock absorber allow the driver to adjust the suspension to suit all road/track conditions.
|
|
|
|
|
TEIN SUPER STREET COILOVERS
Great for daily driving and occasion track use, whether it be at the drag strip, local circuit, or Auto-X course. Includes both ride height and damping force adjustment to allow the driver to dial in the suspension for various surface conditions.
|
|
|
|
|
TEIN BASIC COILOVERS (95-99)
BASIC damper is a great option for consumers wanting a simple and quality made coilover. Each application is test fitted and road tested to ensure the best possible balance between comfort and performance on the street. 95-99 DSM only.
Price: $775.00
|
|
|
|
|
MEGAN RACING STREET SERIES COILOVERS
Feature 32 Levels of damper force adjustment, adjustable ride height, rubber dust covers, single cylinder design and aluminum brackets
90-94 AWD spring rates: 12kg Front/10kg Rear
95-99 spring rates: 14kg Front/6kg Rear
|
|
|
|
|
SWIFT REPLACEMENT COILOVER SPRINGS
While most track racers have already begun the ritual of swapping their springs, many swap from one brand to another, either softer or harder. What if a spring could change other dynamics, such as a noticeably lighter unsprung mass, smoother weight transfer, better ride quality, lower tire temperature, and increased ability to anticipate vehicle reaction? That's exactly what the Swift Metric Coilover Springs offer to you. Click for all opitons.
|
|
|
|
|
TOKICO HPK SPRING/SHOCK KIT 95-99
NON-ADJUSTABLE HP series of Tokico's performance shocks/struts with a matched set of performance lowering springs will give the FWD models a drop of about 1.5" front and rear, while the AWD will go a bit lower with a 1.75" drop front and rear.
|
|
|
|
|
TOKICO ILLUMINA SPRING/SHOCK KIT 95-99
5-POSITION ADJUSTABLE Illumina series of Tokico's performance shocks/struts with a matched set of performance lowering springs will give the FWD models a drop of about 1.5" front and rear, while the AWD will see a bit lower stance with a 1.75" drop front and rear.
|
|
|
|
|
TOKICO ILLUMINA ADJUSTABLE SHOCKS 95-99
Tokico Illumina adjustable shocks and struts are designed for tuning street suspensions, offering 5-position adjustable shocks and struts from their Illumina Series. A simple click of a screwdriver allows you to change for ride or handling balance. So whether you are going to the track, or simply cruising, the Illumina range of adjustment can adapt to your needs.
|
|
|
|
|
TOKICO HP NON-ADJUSTABLE SHOCKS 95-99
Tokico HP NON-ADJUSTABLE shocks feature a twin-tube low-pressure design that uses a multistage variable-aperture sandwich-valve system consisting of precision spring plates and angle drilled piston ports. The technology sounds complex, but the result is easy to figure out: vehicle control, safety, and comfort.
|
|
|
|
|
KONI YELLOW ADJUSTABLE SHOCKS 90-99
The KONI Sports feature an externally adjustable spring seat for ride height adjustment and can lower the car approxamately 25mm. You can switch back and forth, in a matter of seconds, from a comfortable "street" setting to a more firmer setting for a sporty drive. Click for more info.
|
|
|
|
|
H&R SPORT SPRINGS
H&R Sport Springs lowers 1.5-1.8" on average. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort.
|
|
|
|
|
H&R RACE SPRINGS
H&R Sport Springs lowers 1.75-2.5" on average. H&R Race Springs are designed for high performance drivers who want the most out of their vehicles. When the need for uncompromised handling performance becomes a priority, H&R Race Springs will provide over-the-top race ready performance and appearance.
|
|
|
|
|
TEIN S.TECH SPRINGS
TEIN S.Tech Springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort.
|
|
|
|
|
TEIN H.TECH SPRINGS
High.Tech springs are designed for those seeking a slightly lowered stance while maintaining high ride quality at a reasonable price. Most vehicles will attain a 1.2 inch drop for a more attractive appearance, added performance, and excellent comfort. 95-99 FWD only.
Price: $220.00
|
|
|
|
|
EIBACH PRO KIT (95-99)
The Eibach Pro-Kit springs are designed to lower the vehicle's center of gravity, reducing body roll in the turns, dive under braking, squat during acceleration giving the car a more solid secure feel at all times while giving the car a more aggressive stance: Not too slammed, and it won't look like a monster truck anymore!
|
|
|
|
EIBACH SPORTLINES (95-99 DSM)
The Eibach Sportline Springs will definitely give you a slammed DSM. You'll need some camber adjustment, but when all is said and done, (and you may not be able to fit your foot under the front bumper if you're still on 16" wheels!) it'll look sexy! Currently only 2G FWD is available.
Price: $260.00
|
|
|
|
STM REAR CAMBER KIT 2G DSM (95-99)
Looking to fix that rear camber issue? Our kit will fit 95-99 Eclipse and Talon models, turbo and non-turbo. Kit is for both sides.
Price: $24.00
|
|
|
|
SPC FRONT CAMBER KIT (95-99)
By replacing the factory ball joint, this sliding ball joint allows for greater changes than previously available. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered.
Adjustment range: Camber -1.50° to +1.50°
Price is per side, please check quantity.
Price: $125.00
|
|
|
|
EIBACH FRONT CAMBER KIT (90-94)
Eibach's front camber adjustment kit includes both sides for the front camber on your 90-94 DSM.
Adjustment range: Camber -2° to +2°
Price: $49.00
|
|
|
|
INGALLS REAR CAMBER KIT (90-94)
Ingalls rear camber adjustment kit includes both sides for the rear camber on your 90-94 DSM. (AWD only)
Adjustment range: Camber -2° to +3°
Price: $220.00
|
|
|
|
PROTHANE MOTOR MOUNT INSERTS
These help to get rid of wheel hop, make a more consistent shift and keep your engine still and solid. This kit is for all 4 engine mounts. Available in Red or Black.
|
|
|
|
ENERGY SUSPENSION MASTER SET
Energy Suspension's HYPER-FLEX System Complete Master Bushing Set includes front and rear control arm bushings, front and rear shock bushings and transmission shifter stabilizer bushings (for manual transmissions only). Fits both FWD and AWD 95-99 DSM.
|
|
|
|
FRONT CONTROL ARM BUSHINGS (90-94)
Energy Suspension Front Control Arm Bushing Set for 1G 90-94 DSM AWD/FWD maintains proper alignment under extreme conditions and improves vehicle handling, cornering and overall control. Full floating, for smoother operation. Made of Energy's HYPER-FLEX performance polyurethane to add performance and durability.
Price: $50.00
|
|
|
|
FRONT CONTROL ARM BUSHINGS (95-99)
Energy Suspension Front Control Arm Bushing Set for 2G 95-99 DSM AWD/FWD maintains proper alignment under extreme conditions and improves vehicle handling, cornering and overall control. Full floating, for smoother operation. Made of Energy's HYPER-FLEX performance polyurethane to add performance and durability.
Price: $40.00
|
|
|
|
ENERGY SUSPENSION MOTOR &
TRANSMISSION MOUNT INSERTS
This kit will restore your worn mounts, reduce unwanted motor assembly movement and reduce wheel hop. These polyurethane inserts are thoroughly tested to add support and stability to the existing O.E.M. motor mount system. Not available for Auto Transmissions.
Price: $20.00
|
|
|
|
ENERGY SUSPENSION SHIFTER BASE BUSHINGS
These help to create a strong, solid feel from your shifter. This kit fits only 95-99 DSM.
Price: $12.00
|
|
|
|
GOODRIDGE BRAKE LINES
Featuring the finest quality stainless steel braided hose, improving braking performance, eliminating the spongy feel of rubber hoses and providing superior resistance to corrosion -and guaranteed forever. Zinc plated steel hose end fittings eliminate corrision and make maintenance easy.
|
|
|
|
|
RUSSELL BRAKE LINES
Stainless steel braided hose with zinc-plated fittings, Russell Brake Line Kits increase braking performance and reduces brake pedal travel. Russell brake lines meet the strict guidelines of the D.O.T. MVSS-106 requirements. Each kit comes with all necessary hardware and fittings.
|
|
|
|
MOTUL RBF 600 BRAKE FLUID
100% synthetic fluid for hydraulic-actuated brake and clutch systems. Specifically designed to resist the high temperatures of actuated (steel or carbon) racing brakes and clutch systems.
Price: $20.00
|
|
|
|
|
ATE SUPERBLUE BRAKE FLUID
High performance Brake Fluid ideal for road racing, autocross, and high performance driving. Exceeds all DOT 4 requirements. Dry boiling point 536° F, wet boiling point 396° F. This fluid is NOT SILICONE and is compatible with conventional brake fluid.
Price: $21.00
|
|
|
|
|
NRG INNOVATIONS RACING LUG NUTS
NRG Innovations aluminum lug nuts M12 x 1.5. Made of super lightweight forged aluminum for strength and less weight. Knurled ends for easy hand tightening, narrowed head for easy installation onto wheel studs. Fits most aftermarket and performance wheels. Will not work with stock wheels.Price is for a set of 20.
|
|
|
|
GORILLA TUNER LUG NUTS | 12MM X 1.5
Gorilla small diameter lug nuts are designed to fit all tuner wheels. Gorilla small diameter lug nuts' closed-end bulge design prevents rusting problems, produces better torque, and prevents breakage. Gorilla small diameter lug nuts are heat-treated and plated for strength and beauty. (Not for stock wheels).
|
|
|
|
ARP ELONGATED WHEEL STUDS
These are longer and stronger replacement wheel studs. They are heat treated 8740 chrome moly steel with a cadmium plating for extra durability with a tensile strength of 190,000 psi to handle all kinds of competition racing. Stock lug nuts will not fit these, however, the Muteki open-ended nuts above will work perfectly!
Press-In, 12mm x 1.5 right hand thread, Length 2.85"
Price per 5 pack: $39.00
|
|
|
|
GIRODISC CALIPER PISTON SPREADER
Made from steel and powder coated for durability. The slider is cadmium plated. The pivot bushings are all made from nylon and will ensure smooth action. This tool will quickly become invaluable to any team, shop, or enthusiast who changes pads and rotors with any frequency.
Price: $225.00
|
|
|
|
|
SIMPSON RACING SKYJACKER PARACHUTE
These Simpson Skyjacker reinforced nylon parachutes utilize a handmade crossform design that's reliable and durable up to 200 mph. They have a 10 ft. plume, which extends 12 ft. from the car and uses a 12" pilot chute and compression launch spring. The 0.090" alloy mounting plate allows for bolt-on installation, and they include a Nomex chute pack and backing.
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |