DSM | EVO | EVO X | 3000GT | GTR | BIKES | SUBARU
90-99 DSM INTAKE & INTERCOOLER COMPONENTS

Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.



STM I.M. HEAT BARRIER GASKET (95-99 DSM)
The STM Intake Manifold Heat Barrier Gasket is 3mm thick to space your manifold from your head and help reduce your intake temperature. USA-Made product out of Rochester, NY! Fits 95-99 2G DSM
Price: $40.00
STM I.M. HEAT BARRIER GASKET (90-94 DSM)
The STM Intake Manifold Heat Barrier Gasket is 3mm thick to space your manifold from your head and help reduce your intake temperature. USA-Made product out of Rochester, NY! Fits 90-94 1G DSM
Price: $40.00
STM 4" INTAKE PIPE KIT (NO MAF)
The STM 4" Intake Pipe kit is designed for cars running no maf with a 4" turbo inlet. It comes with a K&N air filter, high-quality silicone coupler, polished aluminum intake pipe and two hose clamps. Fits 90-99 DSM
Price: $160.00
STM 3" 2G INTAKE PIPE KIT (NO MAF)
The STM 2G DSM 3" Intake Pipe is made in-house of lightweight, polished aluminum and are designed for cars running without the MAF with a 3", 2.5" or 2.25" turbo inlet. Includes your choice of 3" K&N filter or Vibrant filter (pictured). 95-99 DSM.
STM INTAKE MANIFOLD SENSOR ADAPTER)
The STM intake manifold sensor adapter gives you an 1/8" NPT thread allowing you to cleanly attach a map sensor, pressure sensor (or any other of your choice) directly on your Evo VIII-IX or 95-99 DSM manifold.
Price: $25.00
STM HP THROTTLE BODY SHAFT SEALS (91-99)
STM High Pressure Throttle Body Shaft Seals. Sold as a pair. When these seals wear out, they can cause leaks, sticking, and jamming of the throttle plate. We tested a car on our dyno at STM with OEM leaky seals... When the seals were replaced, we picked up 20 whp and 20 ft pounds! Incredible Boost Leak! These do not fit 1990 DSM.
OMNI POWER MITSUBISHI MAP SENSORS
Omni Power USA 3, 4 & 7 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes.
MAP-MITS-3BR,MAP-MITS-4BR,MAP-MITS-7BR
K&N UNIVERSAL CONE AIR FILTERS
K&N's Universal Air Filters are designed and manufactured for a wide variety of applications. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16" (1.5mm) to fit in-between sizes. Please click the image for more info.
VIBRANT "OPEN FUNNEL" AIR FILTERS
Vibrant Open Funnel Air Filters feature an inverted filter cap design which greatly increases the filter surface area for improved air flow and filtration. Cotton-Gauze Filter Element / Rubber Base. Please click the image for more info.
VIBRANT BELLMOUTH VELOCITY STACKS
Vibrant's new high efficiency Bellmouth-style Velocity Stacks are ideal for All Motor and Forced Induction race applications. They allow for less turbulent air to enter your motor, resulting in dramatical airflow improvements and ultimately significant horsepower and torque improvements. Also helps reduce turbo lag.
10950,10951,10952,10953,10954
INJEN INTAKE (2G 95-99)
The Injen IS Series is a traditional, underhood intake system that is placed in the stock location of the factory air-box system. Each system is built from 6061, T-6 aluminum alloy to ensure the lightest design possible. Every IS system is certified or pending by the California Air Resource Board and backed by Injen Technology's limited lifetime warranty. 2G 95-99 DSM.
K&N AIR FILTER KIT (2G 95-99)
K&N's 95-99 filter kit comes with mas air adapter, filter, and hardware and brackets to connect the end of the filter right to the car body for a sturdy fit and ensuring air flow on all 4 sides. All K&N Filters come with their Million-Mile Warranty, but we do offer just the filter if your's becomes too beat up for your liking!
K&N OEM REPLACEMENT FILTER (2G 95-99)
Here's one for the unmodified virgins out there! K&N's stock airbox replacement air filter comes with K&N's million mile warranty and is reuseable after a cleaning. 95-99 DSM.
Price: $48.00
K&N OEM REPLACEMENT FILTER (1G 90-94)
Drop in filter for 90-94 DSM's connects right to the 1G MAS sensor, getting rid of the big air box.
Price: $56.00
VIBRANT AIR FILTER AND ADAPTER (2G 95-99)
Filter adapter works with any 4.5" Inner Diameter air filter and will attach right to your MAS air meter. Vibrant Air Filters with inverted filter cap design greatly increase the filter surface area for improved air flow. 95-99 DSM.
Price: $48.00
K&N AIR FILTER & ADAPTER (2G 95-99)
K&N 4.5" Filter and Vibrant adapter will attach right to your MAS air meter. 95-99 DSM.
Price: $66.00
VIBRANT MAS ADAPTER PLATE
Vibrant Performance Mass Air Flow Sensor Adapter Plate. T6061 Aluminum.
Price: $23.00
K&N BREATHER FILTERS
K&N's Crankcase Vent Filters are designed to clamp directly to metal or plastic tubing. Ideal for engines, transmissions, oil or gas tanks on racing vehicles. Available in a wide variety of sizes and applications. Please click the image for more info.
VIBRANT BREATHER FILTERS
Vibrant Performance Crankcase Breather Filter with Chrome Cap. Cotton Gauze Filter Element / Metal Base. Available in a wide variety of sizes and applications. Please click the image for more info.
ETS 10.5" FMIC RACE KIT (2G 95-99)
The ETS 2G 10.5" Race Kit is an all out effort, providing track driven vehicles with the best intercooler system available. At the heart of the kit is ETS's premium bar and plate core. These high flowing cores feature an exclusive offset and staggered internal fins and louvered external fins. This dense fin design allows these cores to be some of the most efficient units available while still retaining good flow, both on the charge air (internal) side and the ambient (external) side. This will ensure little pressure drop across the intercooler and that the radiator gets LOTS of airflow. Please click the image for more info.
Price staring at: $899.00
ETS 10.5" FMIC RACE KIT (1G 90-94)
The ETS 1G DSM Race Kit features a very large 25" x 10.5" bar and plate intercooler core that is intended to cool large amounts of air at high boost levels. As this unit flows 980CFM, it can handle turbos with compressor sections as large as a T66 with ease. This unit will give you the coldest charge air temperatures possible, and even though it is quite large, will still fits the vehicle nicely. Expect to see charge air temps of 100-120° at the end of a full quarter mile pass. Please click the image for more info.
Price staring at: $899.00
ETS 7" FMIC STREET KIT (2G 95-99)
The ETS 2G 7" Street Kit is hands down the best kit on the market today for street driven vehicles. With a bar and plate core, mandrel bent piping, stainless T-Bolt clamps, 4-ply silicone and full instructions, this kit is the complete package. At the heart of the kit is ETS's premium bar and plate core. These high flowing cores feature an exclusive offset and staggered internal fins and louvered external fins. This dense fin design allows these cores to be some of the most efficient units available while still retaining good flow, both on the charge air (internal) side and the ambient (external) side. Please click the image for more info.
Price staring at: $769.00
ETS 7" FMIC STREET KIT (1G 90-94)
The ETS 1G 26" x 7" Street kit is designed exclusively for street driven cars. This unit is designed to give the highest performance possible while still retaining the factory crash beam and allowing good ambient airflow to the radiator. The core size of 26" (33" overall) fills the whole grill with core for a killer look and ultimate performance. Please click the image for more info.
Price staring at: $799.00
90-94 BUSCHUR FMIC KIT
This complete for your 1G DSM, includes: 24x13x4" core, polished 2.5" stainless piping, polished stainless t-clamps, cuoplers, 2.5" aluminum throttle body elbow, mounting bolts, gaskets, aftermarket overflow bottle, and 12" Spal fan w/mounting brackets. This is also available with ONLY the Piping, T-Clamps and Couplers for $400.
BUSCHUR MISCELLANEOUS CORE
This core has the end tanks already in place for those of you looking for a DIY project or a custom set-up. It measures in at 24" x 3.5" x 10.5"
Price: $485.00
ETS 2.5" INTERCOOLER U-PIPE (2G 95-99)
The ETS "U" Pipe for ETS 2G DSM Intercooler Kits is on located on the driver side "hot side" of the intercooler and connects to the inlet side of the intercooler. Available with 3 different finish options.
ETS BANANA INTERCOOLER PIPE (2G 95-99)
The ETS 2.5" "Banana" pipe for the ETS 2G DSM Intercooler kits connects the 45° pipe to the Intercooler. Available with 3 different finish options.
ETS J-PIPE (2G 95-99)
The ETS "J" Pipe for their 2G DSM Intercooler kits allows you to run an upgraded turbo like the 14b or 16g turbos. This pipe bolts directly to the turbo and connects to the "U" pipe. Available with 3 different finish options.
ETS T25 PIPE (2G 95-99)
The ETS T25 piping for the 2G DSM Intercooler kit allows you to use the ETS kit with stock T25 or T28 equipped 2G DSM. Since the stock turbo points towards the passenger side, and space is tight, ETS developed this "V" pipe for a perfect fit. Available with 3 different finish options.
ETS T3/T4 PIPE (2G 95-99)
This is the ETS solution for an upgrade to a T3/T4 Down Firing Turbocharger for your 2G 95-99 DSM.
ETS 45° INTERCOOLER PIPE (2G 95-99)
The ETS 45° Pipe for the Mitsubishi Eclipse 2G DSM. This pipe is the long pipe located in the engine compartment on the lower passenger side between the banana pipe and throttle body pipe. Depending on what MAF option you select we can place the BOV flange on either the 45° Pipe or the Throttle body pipe. Some options are not available. On the Maf Translator option the 45° pipe is cut down 3" to allow for the GM MAF to be placed in between the 45° pipe and throttle body pipe. Available with 3 different finish options. Click for more info.
ETS 14B/16G J-PIPE (1G 90-94)
The ETS J-Pipe for the 1G DSM Intercooler kit allows you to use the stock turbo and 16g turbo with ETS Intercooler kits. This pipe bolts directly to the turbo and connects to the 2" 90 degree pipe. When running a 20g or T3/T4 turbo this pipe is not needed. Available with 3 different finish options.
ETS THROTTLE BODY PIPE (2G 95-99)
This is the ETS Throttle Body Pipe for the ETS 2G DSM Intercooler Kit. This unit is designed to clear the ABS unit and is available in standard and MAF Translator in blow-through configuration. On the standard kit, the 2G DSM and Greddy BOV flanges are on the Throttle Body pipe and all other flanges (hks, tial, turboxs, blitz, etc) are mounted on the "45". When using the MAF Translator all of the blow off valve flange is relocated to the "45" Pipe to allow you to use the blow off valve in a "vent to atmosphere" setup. Click for more info.
ETS 2.5" 85 DEGREE PIPE (1G 90-94)
The ETS 2.5" 85 Degree Intercooler Pipe connects directly to the intercooler on the hot side of the piping kit. Available with 4 different finish options.
1GDSM_2590
ETS THROTTLE BODY ELBOW (1G 90-94)
The 2.5" Stainless Steel ETS 2.5" Throttle Body Elbow is designed to clear the ABS unit and is available in standard or speed density, with 3 different finish options.
1GDSM_PIPE_T
ETS 2.5" BOV INTERCOOLER PIPE (1G 90-94)
ETS 2.5" BOV Intercooler Pipe can be setup for stock air meter, translator or speed density with your choice of blow off valve flange. Works with stock intake manifold or magnus intake manifold including the new magnus cast intake manifold. Click for all options.
95-99 16G INSTALL KIT
The new V2 install kits from Extreme Psi include the stainless steel J-pipe from turbo to side mount, stainless steel oil feed line, socketless oil return line kit, turbo to manifold gasket, O2 housing gasket, couplers, T-bolt clamps, 2 oil return gaskets, bolts and washers.
Price: $199.00
JMF 1G 90-94 DSM "DRAG VERSION"
We've all heard the saying "Bigger is Better" ...That statement couldn't be more true when it comes to turbocharged cars and intake manifolds. Introducing the JMF Aluminum DRAG VERSION Sheetmetal Intake Manifold for the 1G 4G63 DSM. This intake manifold is for the hard core racers only! If your running a 35R or larger turbo, click here! ...If your not then keep on scrolling down!
JMF 2G 95-99 DSM "DRAG VERSION"
We've all heard the saying "Bigger is Better" ...That statement couldn't be more true when it comes to turbocharged cars and intake manifolds. Introducing the JMF Aluminum DRAG VERSION Sheetmetal Intake Manifold for the 2G 4G63 DSM. This intake manifold is for the hard core racers only! If your running a 35R or larger turbo, click here! ...If your not then keep on scrolling down!
JMF 1G 90-94 DSM "RACE VERSION"
If it's streetable horsepower your looking for, this is the manifold for you! Introducing the JMF Aluminum Race Sheetmetal Intake Manifold. This is recommended for cars running a 20G or larger turbo who want the most top end power without compromizing driveability.
JMF 2G 95-99 DSM "RACE VERSION"
If it's streetable horsepower your looking for, this is the manifold for you! Introducing the JMF Aluminum Race Sheetmetal Intake Manifold. This is recommended for cars running a 20G or larger turbo who want the most top end power without compromizing driveability.
JMF 1G 90-94 DSM "STREET VERSION"
Similar to the JMF Race Version, this manifold includes a smaller plenum designed for better spool up on the street/auto X track. It is recommended for cars running a 20g or smaller turbo.
JMF 2G 95-99 DSM "STREET VERSION"
Similar to the JMF Race Version, this manifold includes a smaller plenum designed for better spool up on the street/auto X track. It is recommended for cars running a 20g or smaller turbo.
JMF RACE BUMPER (90-94)
You know how hard it is to cut out the OEM bumper. You could always just remove it, but then your bumper cover is left with no support, flapping in the wind. JMF's 2 pound aluminum race bumper is the solution for you! The support itself is made from 1/4" thick material and features threaded holes for the oem bolts to go right back in place. Click for more info.
Price: $180.00
K&N FILTER RECHARGER KIT
K&N Filter Recharger Service Kit. A six-step maintenance system designed to clean any K&N Filtercharger Air Filter. Restores air flow efficiency so your Filtercharger performs like new! 6.5 oz. Spray Oil & 12 oz. Filter Cleaner
Price: $13.00
UNIVERSAL CLAMPS, COUPLERS & HOSE
Click here for our exclusine line of STM Silicone Couplers, T-clamps, hose clamps, silicone hose, T-fittings and more.
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!