DSM
|
EVO
|
DIY
|
OEM
|
FUELS
|
TUNING
|
DSM IGNITION | WIRING | BATTERY | SPARK PLUGS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 730-4314.
|
|
 |
|
|
STM 90-99 DSM VALVE COVER PLATE
Our black anodized, lightweight aluminum, STM etched valve cover plates are made 100% right here in Rochester, NY. They include 5 stainless steel allan cap bolts to keep your engine bay looking sleek and clean.
Price: $89.00
|
|
|
|
|
STM BATTERY RELOCATION KIT
If you want to relocate your battery the safest way, this is the kit for you. Comes with everything shown- Breakers, ring terminals, 4 gauge wire and cable ties.
Price: $79.00
|
|
|
|
SPARK TECH COIL-ON-PLUG (BASIC)
Spark Tech's Basic C-O-P systems allow you to run MORE BOOST without premature spark blow out, caused by misfired and uneven burn of the fuel mixture in the combustion chambers. Available for 90-99 DSM. Be sure to check your DSM year as prices and applications vary.
|
|
|
|
|
SPARK TECH COIL-ON-PLUG (PRO14CDI)
Spark Tech's 4 channel system, recommended for use with Standalone ECU's, is wired with military-spec Tefzel wire and includes a sealed marine fuse holder, stainless allen head fasteners and M&W Pro-14b CDi Box.
Price: $1490.00
|
|
|
|
|
MSD DIS-2 IGNITION
MSD Programable DIS-2 (2 Channel Ignition) delivers a potent spark with 190 mj of spark energy! Below 3,300 rpm, there is series of multiple sparks that burn in the cylinder for 20° producing a smooth idle with great throttle response.
The heart of the Programmable DIS-2 is an efficient microprocessor that reviews, analyzes and manages every trigger signal and is capable of up to 15 million instructions per second! The end result is a powerful ignition control with endless programming capabilities to produce reliable performance.
Price: $550.00
|
|
|
|
|
DYNATEK ARC-2 IGNITION (95-99)
ARC-2 is the smallest, lightest CDI, producing over 189mJ delivered to the coil per spark, the highest of any other on the market! Using plug and play technology, the ARC-2 utilizes oem harnesses and comes with a custom bracket for a clean installation.
Price: $365.00
|
|
|
|
|
MSD 8.5mm SUPER CONDUCTOR WIRES
MSD's Super Conductor wires for your 2G (95-99) are direct replacement spark plug wires and offer greater spark for a smoother idle, better gas mileage, better heat resistance, and longer life. The MSD Spark Plug Wires are 8.5mm thick and low resistance without electronic interference, giving you a smooth clean spark everytime!
Also get 4 FREE NGK Plugs with online purchase!
|
|
|
|
NGK PREMIUM WIRE SET
Utilizing a construction method known as "variable pitch" wire winding, these wires create resistance to radio frequency interference. With materials similiar to bullet-proof vests, high quality EPDM and Silicone, corrosion resistant nickel-plated terminal ends, these are made to fit perfectly and resist high temp, oil and chemical damage. The wires are numbered to correspond to the cylinder.
Also get 4 FREE NGK Plugs with online purchase!
|
|
|
|
MAGNECOR IGNITION CABLES
Stainless Steel wire under aerospace grade silicone rubber with a heat resistance up to 1,000 degress. Single layer construction prolongs the jacket's insulating ability by conducting extreme heat away from hot-spots that occur near over-the-limit heat sources. We use the 8.5mm for most applications or pick up the 10mm for even more spark!
Get 4 FREE NGK Plugs with online purchase!
|
|
|
|
JMF COIL PACK BRACKET (90-99)
A must-have when installing an aftermarket intake manifold. Most sheetmetal intake manifolds on the market today do not have mounting points for the stock coils and JMF has a perfect solution to that! CNC waterjet cut from 1/8" thick aluminum, this bracket mounts on the backside of your 6 or 7 bolt block. It is designed to work with the 1G and 2G DSM coilpacks. Click for more info.
Price: $43.00
|
|
|
|
NGK SPARK PLUGS
Our spark plug of choice! We use these plugs in our 10 second street car. The BPR7ES's are one step colder than the stock BPR6ES and they like to run about 14-20 psi where the 8's and 9's are recommended for higher boost and/or nitrous.
Price: $2.25 each
|
|
|
|
|
JMF 90-94 SMALL BATTERY KIT
Includes a Hawker PC680 battery (optional), terminals, battery tray, and hardware. CNC machined aluminum, then TIG welded to the mounting bracket to hold everything in place and utilizes 3 mounting points.
The battery will mount on the subframe down and out of the way. You will have to remove several items (like the charcoal canister, oem tray, and other misc stuff) to make room for it.
|
|
|
|
JMF 95-99 SMALL BATTERY KIT
Includes a Hawker PC680 battery (optional), terminals, battery tray, and hardware. CNC machined aluminum, then TIG welded to the mounting bracket to hold everything in place and utilizes 3 mounting points.
The battery will mount on the subframe down and out of the way. You will have to remove several items (like the charcoal canister, oem tray, and other misc stuff) to make room for it.
|
|
|
|
SP680 SMALL BATTERY
This tiny battery can deep cycle as well as provide enormous cranking power- weighing less than 14.5 pounds!
680 cranking amps for 5 seconds,
595 cranking amps for 10 seconds,
525 cranking amps for 20 seconds.
Measures 7" x 3" and 7.25 to the height of the terminals.
Price: $165.00 Shipped
|
|
|
More Parts Coming Soon
Please bear with us as we prepare and update the inventory for our new website. If you don't see what you're looking for, give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | |