DSM
|
EVO
|
OEM
|
EVO X
|
3000GT
|
SUBARU
|
DSM BOOST CONTROLLER | BOV | WASTEGATE | FLANGES | GASKETS | TIMERS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 730-4314.
|
|
 |
|
|
PTE PW46 EXTERNAL WASTEGATE
Featuring a black anodized billet aluminum wastegate cap, and a Kevlar reinforced silicone diaphragm, these units can be used in any kit or setup that currently utilizes a V-band style 44mm gate. Includes all the necessary hardware (flanges, clamps, springs, etc), and can accommodate a wide range of boost pressures (anywhere from 1.5PSI up to 25.5PSI).
Price: $340.00
|
|
|
|
TiAL SPORT WASTEGATES
We offer TiAL's full line of unbeatable, USA-Made products.
Available wastegates are: F38, F41, V44, F46, V60 and TiAL's new MV-S super-compact V-Band 38mm Wastegate.
Click the image for all applications.
|
|
|
|
|
TiAL SPORT BLOW OFF VALVES
We offer TiAL's full line of unbeatable, USA-Made products.
Available valves are: Alpha Q, Q and TiAL's original 50mm.
Click the image for all applications.
|
|
|
|
|
HALLMAN PRO BOOST CONTROLLERS
The Hallman Pro kit is our favorite. Simply turn the adjustment knob and it stays- No potential for overboosting. We also think these are the best looking kits available! The RX kit comes with a ceremic ball and lighter springs for fine tuning of boost.
|
|
|
|
HALLMAN ES BOOST CONTROLLER
The ES (Essentials) Kit is your very basic boost controller, designed for the "best bang for the buck!" These only come in black.
Price: $75.00
|
|
|
|
|
SYNAPSE-SYNCHRONIC BLOW OFF VALVE
This fast-acting design functions as a blow-off, diverter/bypass and even a pop-off valve, eliminates the diaphram with a multi-tier piston actuator that self-centers under pressure. This design is intended to significantly reduce or eliminate compressor surge and will not leak boost. Kit includes the weld-on steel flange and the aluminum flange is available separately.
|
|
|
|
HKS SUPER SEQUENTIAL BOV (SSQV)
Dual stage pull-type relief valve, which will not leak under any level of boost. This ensures a quick valve response and complete closure during idle. Also available with a vehicle specific instal kit for the 95-99 models. Comes with recirc fitting and tube, vacuum hose, clamps, zip ties, gaskets, brackets- everything you'll need.
|
|
|
|
HKS SSQV RECIRCULATION FITTING
HKS SSQV Re-Circulation Fitting inserts enable the SSQV Valve to reroute discharged compressed air back into the intake stream to create a closed loop system to prevent bogging / stumbling of rich air/fuel ratio conditions in mass-air sensor equipped vehicles.
Price: $12.00
|
|
|
|
HKS SSQV WELD-ON FLANGE
HKS SSQV weld-on steel flange. 50mm.
Price: $25.00
|
|
|
|
EVO IX MR BLOW OFF VALVE
The aluminum OEM Mitsubishi valve is much stronger than the stock plastic ones and uses a stiffer spring.
Price: $140.00
|
|
|
|
|
OEM 90-94 DSM BLOW OFF VALVE
Probably the best and cheapest OEM valve out there. This is just the blow off valve. Don't forget to get a gasket and a flange if you need them.
Price: $95.00
|
|
|
|
|
OEM 90-94 BOV GASKET
Don't waste your time finding a knock-off, just get the OEM Mitsubishi gasket.
Price: $2.25
|
|
|
|
NEW HKS TURBO TIMER TYPE-1
HKS's new sleek styling is great for a custom mounted location or small enough to be tucked out of the way. The Type-1 is a more spohisticated unit with abilities to display 1/4 mile times, speed, 0-60ft and much more. Click the image for all the details on the functions of this unit. You will need a harness, so check carefully for your application below.
Price: $150.00
|
|
|
|
|
NEW HKS TURBO TIMER TYPE-0
HKS's new sleek styling is great for a custom mounted location or small enough to be tucked out of the way. The Type-0 is a more basic Timer than the Type-1 above and comes with the red light-up display. Click the image for all the details on the functions of this unit. You will need a harness, so check carefully for your application below.
Price: $94.00
|
|
|
|
|
APEXi TURBO TIMER
Apexi's Auto Timer is compact and clean in design, featuring a unique multi angle joystick button allowing easy navigation through the many feature menus.
Price: $95.00
|
|
|
|
|
JMF WELD-ON GREDDY BOV ADAPTER FLANGE
This aluminum weld-on flange allows you to bolt on a Greddy Type R/S/RS blow off valve to your intercooler piping.
Price: $35.00
|
|
|
|
JMF 90-94 DSM BOV ADAPTER FLANGE
This aluminum weld-on flange allows you to bolt on a 1G 90-94 DSM blow off valve to your intercooler piping.
Price: $35.00
|
|
|
|
38MM SS WASTEGATE FLANGE
Stainless Steel gasket, made in the USA.
Fits:
Tial 38mm
Turbonetics Deltagate and Evolution
Innovative Mini Gate
Turbosmart Ultragate 38
Price: $12.00
|
|
|
|
38MM TiAL INLET & OUTLET FLANGES
Genuine Tial 38mm Wastegate Flanges are counter-sunk for discharge piping for easier welding and stronger welded angles.
Make sure you select which piece you want.
Price Each: $25.00
|
|
|
|
EXTERNAL GATE BLOCK OFF FLANGE
You can block off your external gate with this 8mm thick mild steel flange- and if you decide you want it permanent, it's thick enough to be welded right on! Fits any 2 bolt 38mm wastegate flange, Tial 35mm and Tial 38mm.
Price: $12.00
|
|
|
|
T3 INLET GASKET
Stainless Steel gasket.
Price: $15.00
|
|
|
|
7CM TURBINE INLET GASKET
Stainless Steel gasket.
Price: $15.00
|
|
|
|
EVO 3 16g O2 HOUSING GASKET
Stainless Steel gasket.
Price: $12.00
|
|
|
|
14B/16G OUTLET/J-PIPE GASKET
OEM Gasket fits 14b, 16g, 18g or 20g turbos with these compressor covers.
Price: $4.00
|
|
|
|
|
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | |