DSM
|
EVO
|
EVO X
|
3000GT
|
NISSAN
|
BMW
|
SUBARU
|
3000GT VR4 & STEALTH R/T | SUSPENSION COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
STM ABS DELETE KIT
The STM ABS Delete Kit includes everything you will need to remove the clutter and weight of your factory ABS system. Comprised of OEM components, high-quality fittings and stainless-steel, braided and coated lines. 91-99 Turbo 3000GT VR4 and Stealth R/T.
Price: $250.00
|
|
|
|
D2 COILOVERS
Featuring a 36 way dampner and rebound adjustable monotube full coilover system. The setup has seperate height and preload adjustments allowing for optimal adjustment and allowing full strut travel at all times. Mounts are constructed of 6061 powder coated aluminum. Threads are teflon coated to prevent rust. Rebuildable and serviceable in the US.
|
|
|
|
TEIN MONO FLEX COILOVERS
Developed for entry-level competition motorsports and advanced street driving. Features include 16-way damping force adjustability, mono-tube internal design, pillowball upper mounts, and EDFC compatibility. Independent adjustments for ride-height and spring pre-load settings for increased suspension tuning. AWD 91-99.
Price: $2052.00
|
|
|
|
|
TEIN TYPE FLEX COILOVERS
Developed for drivers seeking an aggressive coilover that can be used daily, and provide all the adjustments needed for circuit use. Compatible with the EDFC (Electronic Damping Force Controller) for added convenience and adjustability. AWD 91-99.
Price: $1600.00
|
|
|
|
|
TEIN EDFC
The EDFC (Electronic Damping Force Controller) makes it possible for the driver to control the damping force at the touch of a button while in the drivers seat. Stepping motors installed on each shock absorber allow the driver to adjust the suspension to suit all road/track conditions.
|
|
|
|
|
SWIFT REPLACEMENT COILOVER SPRINGS
While most track racers have already begun the ritual of swapping their springs, many swap from one brand to another, either softer or harder. What if a spring could change other dynamics, such as a noticeably lighter unsprung mass, smoother weight transfer, better ride quality, lower tire temperature, and increased ability to anticipate vehicle reaction? That's exactly what the Swift Metric Coilover Springs offer to you. Click for all opitons.
|
|
|
|
|
H&R SPORT SPRINGS
H&R Sport Springs lowers 1"-1.5" on average. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort.
Price: $260.00
|
|
|
|
|
RUSSELL BRAKE LINES FWD
Increases braking performance and reduces brake pedal travel due to the elimination of hose expansion common to factory rubber lines. Each kit comes with all necessary hardware and fittings. 91-99 3000GT/Stealth Front Wheel Drive Only.
Price: $95.00
|
|
|
|
MOTUL RBF 600 BRAKE FLUID
100% synthetic fluid for hydraulic-actuated brake and clutch systems. Specifically designed to resist the high temperatures of actuated (steel or carbon) racing brakes and clutch systems.
Price: $20.00
|
|
|
|
|
ATE SUPERBLUE BRAKE FLUID
High performance Brake Fluid ideal for road racing, autocross, and high performance driving. Exceeds all DOT 4 requirements. Dry boiling point 536° F, wet boiling point 396° F. This fluid is NOT SILICONE and is compatible with conventional brake fluid.
Price: $21.00
|
|
|
|
|
NRG INNOVATIONS RACING LUG NUTS
NRG Innovations aluminum lug nuts M12 x 1.5. Made of super lightweight forged aluminum for strength and less weight. Knurled ends for easy hand tightening, narrowed head for easy installation onto wheel studs. Fits most aftermarket and performance wheels. Will not work with stock wheels.Price is for a set of 20.
|
|
|
|
GORILLA TUNER LUG NUTS | 12MM X 1.5
Gorilla small diameter lug nuts are designed to fit all tuner wheels. Gorilla small diameter lug nuts' closed-end bulge design prevents rusting problems, produces better torque, and prevents breakage. Gorilla small diameter lug nuts are heat-treated and plated for strength and beauty. (Not for stock wheels).
|
|
|
|
ARP ELONGATED WHEEL STUDS
These are longer and stronger replacement wheel studs. They are heat treated 8740 chrome moly steel with a cadmium plating for extra durability with a tensile strength of 190,000 psi to handle all kinds of competition racing. Stock lug nuts will not fit these, however, the NRG open-ended nuts above will work perfectly!
Press-In, 12mm x 1.5 right hand thread, Length 2.85"
Price per 5 pack: $39.00
|
|
|
|
GIRODISC CALIPER PISTON SPREADER
Made from steel and powder coated for durability. The slider is cadmium plated. The pivot bushings are all made from nylon and will ensure smooth action. This tool will quickly become invaluable to any team, shop, or enthusiast who changes pads and rotors with any frequency.
Price: $225.00
|
|
|
|
|
SIMPSON RACING SKYJACKER PARACHUTE
These Simpson Skyjacker reinforced nylon parachutes utilize a handmade crossform design that's reliable and durable up to 200 mph. They have a 10 ft. plume, which extends 12 ft. from the car and uses a 12" pilot chute and compression launch spring. The 0.090" alloy mounting plate allows for bolt-on installation, and they include a Nomex chute pack and backing.
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | |