DSM
|
EVO
|
EVO X
|
3000GT
|
NISSAN
|
BMW
|
SUBARU
|
3000GT VR4 & STEALTH R/T | 6G72 ENGINE COMPONENTS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
STM ENGINE OIL COOLER KITS
Time to clean up that mess you call an oil cooler! This kit is designed to replace your factory oil cooler. Our kit utilizes the Russell ProClassic line which is extremely easy to work with, lightweight and will not scratch your engine bay! Offered in 2 sizes. Click for more info.
|
|
|
|
MITSUBISHI OIL CAP WITH DECAL
These oil cap decals are a perfect accent to your engine bay and allows you to proudly display your preferred oil brand. Purchase these with a brand new Mitsubishi oil cap or just the decal alone.
|
|
|
|
|
WISECO FORGED PISTON SET 8.3:1
Dedicated 2618 alloy forgings, offset wrist pins, Nitrided/Napier Steel rings, skirt coatings, complex dish and dome designs, special skirt profiles, and other features insure longevity and power with boosted and nitrous engines. 91.5mm, 92mm, and 92.5mm bore. 8.3:1 compression ratio. Complete set includes 6 pistons, rings and pins.
|
|
|
|
WISECO XX REPLACEMENT PISTON RINGS
Wiseco's XX piston ring sets feature a stainless steel, gas-nitrided, barrel-faced top ring. They also contain an under hook style, cast iron, phosphate-coated, taper-faced second ring. Oil rings in the XX sets are 3-piece assemblies with gas-nitrided rails and a stainless steel, flex-vent spacer. Price is for ONE piston ring set. Check your quantity when ordering.
|
|
|
|
CROWER STEEL BILLET RODS
Crower is the industry leader in high performance connecting rods. CNC machined from premium quality 4340 chromoly steel, Crower billet rods are the only choice when running nitrous oxide, high boost or high rpm in your "all motor" application. Includes aluminum-bronze bushings and rod bolts rated to 220,000 psi for ultimate clamping ability. 6 Rods for 6G72 turbo Stealth/3000GT.
Price: $1750
|
|
|
|
PAUTER 4340 T-BEAM BILLET RODS
E4340 vacuum melt chrome moly forging. CNC machined. Heat-treated to Rockwell C36, full coverage shotpeened, end-to-end balanced in sets. Each rod comes standard with ARP 2000 bolts rated at 220,000 psi tensile strength. Aluminum-bronze wrist pin bushings (standard.) Set of 6 rods.
Price: $1280.00
|
|
|
|
BRIAN CROWER CAMS
BC high performance camshafts are ground on state-of-the-art CNC cam grinders to insure accuracy and tolerances to within .02mm. Every BC camshaft profile has been prototyped and dyno tested for proven horsepower results prior to placed into mass production. By grinding cores in high volume, Brian Crower, Inc. is able to pass the cost savings on to the end user. Quality at an affordable price.
|
|
|
|
KIGGLY RACING VALVE SPRING KIT
The Kiggly Racing Beehive Valve Spring Kit includes springs and titanium retainers for 6G72 using OEM spring seats. 93lb Seat Pressure at 1.455" 325lb/in Rate
Price: $600.00
|
|
|
|
COMETIC HEAD GASKETS
The Cometic MLS (Multi Layer Steel) head gasket is comprised of three, stainless steel layers for increased strength, it's ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a Vitton rubber based material which is heat resistant to 482°
|
|
|
|
|
BLE TIMING BELT TENSIONER
BLE solid tensioners are manufactured from premium materials and machined to match the factory tensioner's exact mounting position. This innovative solid tensioner allows you to fine-tune the tension on your specific timing belt from stock to kevlar instead of relying on worn out hydraulic units that fail at high rpm's.
Price: $125.00
|
|
|
|
|
BLE SOLID LIFTER CONVERSION KIT
Each BLE Solid Lifter Conversion Kit replaces the factory hydraulic lifters and comes with all necessary hardware for a straightforward installation. BLE Conversion Kits are perfect for anyone upgrading the factory valvetrain and/or camshafts in their sport compact engine.
Price: $480.00
|
|
|
|
|
TOPLINE REVISED LIFTERS
These revised lifters from Top Line will fix that nastly little tick you got going on. Set of 16. Save money, call a friend and buy 2 sets!
|
|
|
|
|
MIL.SPEC THROTTLE BODY SHAFT SEALS (91-99)
These seals keep the throttle plate shaft centered and positioned in the throttle body. When they wear out, they can cause leaks, sticking, and jamming of the throttle plate. Sold as a pair of seals. Add an OEM throttle body gasket for $4.
|
|
|
|
JMF SMALL OIL CATCHCAN
Featuring 2 heavy duty brass inlet fittings, and a brass drain valve, it can be installed by running a hose from the valve cover directly to the catch can, or by utilizing the 2nd inlet, and eliminating the PCV valve. Crafted by JM Fabrications.
Price: $90.00
|
|
|
|
JMF DELUXE OIL CATCHCAN
Similar to JMF's catch cans above, this deluxe unit features a larger body, larger K&N filter, and a level gauge. Also giving you the choice of standard brass fittings or -8, -10 or -12AN fittings. Click for more information.
|
|
|
|
HKS HYBRID SPORTS OIL FILTER
Most aftermarket sports oil filters assume the use of high viscosity oil; therefore, filter paper strength is prioritized while sacrificing absolute pressure loss properties. HKS Hybrid Sports Oil Filter has readdressed filter strength and overall structure to provide the oil flow that the engine requires and to pursue the HKS ideals in what is required from a sports oil filter.
Price: $22.00
|
|
|
|
|
K&N OIL FILTERS
K&N uses thicker canister walls for extra strength and durability coupled with a resin-impregnated cellulose filter media allowing for higher flow rates while providing outstanding filtration. Rapidly becoming a favorite among consumers for its durability and easy removal, with a 1' nut welded to the top of the canister so they can be easily wrenched-off with a standard tool.
Price: $11.00
|
|
|
|
|
K&N SMALL-MED BREATHER FILTER
K&N Breather Filters feature a rubber base 16mm inside diameter inlet and chrome top, available in 2 sizes: medium 2"x1.5" or small 1.375"x1.125"
|
|
|
|
|
K&N LARGE BREATHER FILTER
This large K&N Rubber Base Crankcase Vent Filter features a 1" (25 mm) flange ID, 3" wide with a total height of 2.375 in (60 mm).
Price: $24.00
|
|
|
|
|
VIBRANT BREATHER FILTER
Vibrant Crankcase Breather Filter
(3/8" inlet I.D.)
Price: $10.00
|
|
|
|
|
THREE BOND GASKET MAKER
ThreeBond Gasket Maker Gray RTV Sealant is the highest quality silicone RTV on the market. Specified by many OEM service manuals, you can rest assured it is a perfect choice for your engine.
Price: $20.00
|
|
|
|
|
LOOKING FOR OEM MITSUBISHI PARTS?
Check here for OEM gaskets, belts, bolts, filters and all the random things you may need.
|
|
|
MORE PARTS COMING!
We are constantly updating and adding new parts. If you don't see what you're looking for,
give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | |